Laser Series 6677 Acrylic Letters (Full Alphabet) - Universal

• 3.2" Tall Letters
• All letters and numbers available
• 3M pre-applied double sided adhesive
• To order, select letter individually and add to cart.

Laser Series 6677 Acrylic Letters (Full Alphabet)

Our customer wanted to customize the tailgate of their Bronco and we found out about 4 of these letters fit.  Please see our photo of how we mounted ours.  

These are acrylic letters with pre-applied 3M on the backside.

To order, select letter individually and add to cart.

Installation

Desired install temperature is 75-85 degrees.  Clean the application area with a non wax product.

These are universal and can be used in any place and any vehicle.  We recommend that you use painter's tape and a measuring tape.  Figure out the space available for your custom installation.  Find the top and side limits.  Apply the painter's tape and make straight lines to align your letters.

We recommend using our StickerFab Application Fluid to wet the area.  Remove the backing from the letters and mock them up.  Once you are happy with the alignment, press down firmly.  Wait for the area to dry up and then press the letters down once again.  The application fluid needs to dry before the full adhesion process can begin.

Care

Acrylic polishes up really well with rubbing compound and a microfiber.