American Flag Rear Window Overlays - 2021+ Bronco 4 Door

Name: American Flag Rear Window Overlays - 2021+ Bronco 4 Door
Brand: StickerFab
SKU: 21BRONCOFLAGRW-MB
Price: 54.99 USD
Availability: OutOfStock

经过 StickerFab

$54.99 $59.99

Color

Design

更多详细信息

Add styling to your vehicle
Follows proper flag etiquette (star field leads)
Made in the USA
Install video of a similar product below
NOTE: Only fits standard hard top windows. Does not fit hard tops with removable windows. We temporarily do not have any installed photos. 4Runner photos and install video are for reference.

2021+ Bronco Rear American Flag Overlay Kit - 4 Door

These flags look great in the rear windows of the Ford Bronco. It's a theme tons of off-roaders have embraced as we set off across the country, enjoying, roads, ruts, trails, beaches, and more.

NOTE: This comes as a left and right pair. We temporarily do not have any installed photos. 4Runner photos and install video are for reference.

Install Video

This installs in a similar manner as our fully printed overlays. We will be doing a wet install, however some dry install information is below. Recommended install temperature is over 70 degrees.

NOTES: We recommend that the installation area be free of wax and not under direct sunlight. Wash the vehicle or clean the glass and surrounding trim.

Microfiber
Glass cleaner
Soapy Water (we recommend our StickerFab Installation Fluid)
Heat Gun or Hair Dryer (optional)

3 item kit (microfiber, installation fluid, squeegee)

Wet Install

Follow the video above. The Bronco is a little easier since the surface is flat and does not extend to the roofline. For this, you would use our StickerFab application fluid or a few drops of dish soap mixed with a cup of water. Test you mixture and add more dish soap if needed.

Dry Install

This method is much less forgiving than a wet install. Try at your own risk! You can do a dry install by using painter's tape and a razor or scissors. See the video below of a similar dry install. Make sure you trim the transfer paper and backing paper along the outer edge prior to installing it this way.