Jeep Wrangler Rear Track Bar Relocation Bracket (2007-2018, JK)

Jeep Wrangler Rear Track Bar Relocation Bracket (2007-2018, JK)

After seeing some other aftermarket track bars bend or rip the OEM track bar bracket off the axle, we knew we had to design something that would take some of the force off the OEM bracket. Our track bar bracket is laser cut from 1/4 metal, and uses the OEM trackbar bracket for alignment and ensures it is properly installed. The additional strength comes from the clamping force around the axle tube. Now the forces are distributed between the factory mount and clamping around the axle tube and failure is not a concern.

This bracket can be used with the OEM track bar or our adjustable track bar. Works with lifts from 2-6 inches.

NOTE: Track bar bracket MUST be bolted into the stock axle location AND clamp around the axle tube!