KC HiLiTES FLEX ERA® 3 Dual-Mode SAE Fog Light Pocket Kit — Jeep JL/JT Sport & Sport-S Bumpers (97148)

Street-legal fogs when you need them, off-road punch when you want it. The FLEX ERA 3 Dual-Mode SAE kit drops into Wrangler JL / Gladiator JT Sport & Sport-S plastic bumpers with included brackets and plug-in adapters. Run the SAE J583 fog beam for wide, low-glare visibility on pavement, then flip to the high-output off-road mode when the trail starts. The Master Kit includes both Clear and Selective Yellow lenses so you can tune output for weather and preference. 

Why Jeep owners choose it

• Two beams, one kit — Compliant SAE fog pattern for daily driving; Dual-Mode adds spot power off-road for reach and definition. 
• Clear or Selective Yellow — Pre-installed Clear lenses for max brightness; swap to Selective Yellow to cut glare in rain, snow, and dust. 
• Factory-clean fit — JL/JT Sport & Sport-S bumper fog-pocket brackets and plug-and-play adapters keep wiring tidy—no cutting. (Does not fit JL/JT Premium Plastic OE bumper.) 
• Signature FE3 durability — Compact aluminum pods, serviceable lenses/bezels, and weather-sealed build for real trail use. 

What’s in the box

• (2) FLEX ERA® 3 Dual-Mode SAE LED pods (Clear lenses pre-installed)
• (2) Selective Yellow lenses
• (2) JL/JT Sport & Sport-S bumper fog-pocket brackets + round shrouds
• (2) H16 fog-light harness adapters (Jeep)
• Premium wiring harness with weatherproof connectors & 2-position switch (powers the off-road mode). 

Performance & key specs (per light)

• Output: 3,682 lm (SAE Fog) • 5,949 lm (Dual-Mode) at 5000K
• Candela / Beam distance: 9,440 cd / 84 m (Fog) • 19,984 cd / 124.6 m (Dual-Mode)
• Power / draw: 35W / 2.9A @12V (Fog) • 55W / 4.5A @12V (Dual-Mode)
• Voltage: 9–36V • Ingress: IP65 • Size: W 3.6" × H 3.5" × D 2.6". 

Fitment

• Jeep Wrangler JL (2018–2024) — Sport & Sport-S plastic front bumper
• Jeep Gladiator JT (2020–2024) — Sport & Sport-S plastic front bumper
  Not for JL/JT Premium Plastic OE or steel bumpers; see KC’s other FE3 pocket kits for those applications. 

Install notes

Plug each pod into the factory fog circuit using the H16 adapters for the SAE mode. To enable the off-road high-power mode, connect the supplied harness and 2-position switch to a fused 12V source. Aim low for fog compliance; use Dual-Mode off-highway where permitted.