{"product_id":"camburg-dominator-2-0-r-r-shock-package-for-jeep-gladiator-jt-2020-2026","title":"Camburg Dominator 2.0 R\/R Shock Package for Jeep Gladiator JT (2020-2026)","description":"\u003cdiv class=\"nv-desc\"\u003e\n\u003ch2\u003eCamburg Dominator 2.0 R\/R Shock Package for Jeep Gladiator JT (2020-2026)\u003c\/h2\u003e\n\u003cp\u003eThis is a full set of Camburg Dominator 2.0 remote reservoir shocks for the Jeep Gladiator JT, two fronts and two rears with billet reservoir mounts. They are the same dampers Camburg puts in its Gladiator spring kit, sold on their own for owners who have the springs sorted and want shocks that match.\u003c\/p\u003e\n\u003cp\u003eEach shock has a 2 in. aluminum body with a remote reservoir, which means more oil capacity and better heat control on long rough stretches. A dividing piston keeps the nitrogen and oil apart, so the shock does not foam up and fade when it gets worked hard. Camburg valves them for a mix of daily driving and trail use rather than racing, so expect better small-bump and square-edge ride than a basic lift-kit shock with enough support to keep big hits from bottoming out. On the Gladiator the fronts are for 2.5 to 3.5 in. of lift and the rears for 0 to 1 in., which suits a leveled truck on factory or near-factory rear springs.\u003c\/p\u003e\n\u003cdiv class=\"nv-h\"\u003eWhy it works\u003c\/div\u003e\n\u003cdiv class=\"nv-fcards\"\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eAluminum 2.0 body\u003c\/b\u003eThick-wall aluminum cylinders carry more oil and shed heat faster, so damping stays steady.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eRemote reservoir with dividing piston\u003c\/b\u003eSeparating gas and oil prevents cavitation and keeps pressure and damping consistent through a long run.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eStreet and trail valving\u003c\/b\u003eTuned to stay compliant over small bumps and square edges while still controlling big impacts.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eLengths matched to the lift\u003c\/b\u003eLengths are set for maximum usable travel in both compression and droop at the listed lift height.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eBillet mounts and braided hoses\u003c\/b\u003eBillet reservoir clamps and stainless braided hoses come with the package.\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nv-h\"\u003eSpecifications\u003c\/div\u003e\n\u003ctable class=\"nv-spec\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eJeep Gladiator JT (2020-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift height\u003c\/td\u003e\n\u003ctd\u003eFront 2.5-3.5 in., rear 0-1 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody\u003c\/td\u003e\n\u003ctd\u003e2 in. aluminum, remote reservoir\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounts\u003c\/td\u003e\n\u003ctd\u003eEyelet upper and lower\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eRed \/ Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eFront shocks (2), rear shocks (2), remote reservoir billet mounting brackets (4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e35 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e14404-2025-002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"nv-h\"\u003eBefore you order\u003c\/div\u003e\n\u003cp\u003eThese are lift-specific shocks: the fronts are sized for a 2.5 to 3.5 in. front lift and will be too long on a stock-height front end, while the rears suit a rear that sits within an inch of stock. Reservoir placement takes some planning on install, and you should cycle the suspension slowly afterward to check hoses and reservoirs for clearance. Not sure it fits your build? Call or text us at \u003ca href=\"tel:+19202497744\"\u003e(920) 249-7744\u003c\/a\u003e with your year, trim and setup and we will confirm it.\u003c\/p\u003e\n\u003cdiv class=\"nv-h\"\u003eFrequently asked questions\u003c\/div\u003e\n\u003cdiv class=\"nv-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is in the package?\u003c\/summary\u003e\u003cp\u003eTwo front shocks, two rear shocks and four billet remote reservoir mounting brackets.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat lift height are they for?\u003c\/summary\u003e\u003cp\u003eCamburg lists front 2.5-3.5 in. and rear 0-1 in. of lift.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhy is the rear lift range only 0-1 in.?\u003c\/summary\u003e\u003cp\u003eCamburg's Gladiator setup levels the front and keeps the rear close to stock height, so the rear shocks are sized for that.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I buy fronts or rears only?\u003c\/summary\u003e\u003cp\u003eYes. Camburg also sells the front and rear shocks individually. Ask us if you only need one end.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003eSee our Camburg warranty page for the current terms.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nv-xsell\"\u003e\n\u003cdiv class=\"nv-xh\"\u003eMore from Camburg Engineering\n\u003c\/div\u003e\n\u003cdiv class=\"nv-xrow\"\u003e\n\u003ca class=\"nv-xitem\" href=\"\/collections\/camburg\"\u003e\u003cb\u003eAll Camburg Engineering\u003c\/b\u003eEvery part we carry from the brand\u003c\/a\u003e\n\u003ca class=\"nv-xitem\" href=\"\/collections\/shock-absorbers\"\u003e\u003cb\u003eMore Shock Absorbers\u003c\/b\u003eCompare every brand we carry\u003c\/a\u003e\n\u003ca class=\"nv-xitem\" href=\"\/collections\/jeep-gladiator\"\u003e\u003cb\u003eAll Jeep Gladiator\u003c\/b\u003eBrowse parts that fit\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is in the package?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Two front shocks, two rear shocks and four billet remote reservoir mounting brackets.\"}}, {\"@type\": \"Question\", \"name\": \"What lift height are they for?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Camburg lists front 2.5-3.5 in. and rear 0-1 in. of lift.\"}}, {\"@type\": \"Question\", \"name\": \"Why is the rear lift range only 0-1 in.?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Camburg's Gladiator setup levels the front and keeps the rear close to stock height, so the rear shocks are sized for that.\"}}, {\"@type\": \"Question\", \"name\": \"Can I buy fronts or rears only?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Camburg also sells the front and rear shocks individually. Ask us if you only need one end.\"}}, {\"@type\": \"Question\", \"name\": \"What is the warranty?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"See our Camburg warranty page for the current terms.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"Camburg","offers":[{"title":"Default Title","offer_id":58810391822639,"sku":"14404-2025-002","price":1516.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/14404-2025-002.jpg?v=1794241716","url":"https:\/\/nvmos.com\/products\/camburg-dominator-2-0-r-r-shock-package-for-jeep-gladiator-jt-2020-2026","provider":"NVMOS","version":"1.0","type":"link"}