{"product_id":"camburg-2-5-in-spring-kit-w-dominator-2-0-r-r-shocks-for-jeep-gladiator-jt-2020-2026","title":"Camburg 2.5 in. Spring Kit w\/ Dominator 2.0 R\/R Shocks for Jeep Gladiator JT (2020-2026)","description":"\u003cdiv class=\"nv-desc\"\u003e\n\u003ch2\u003eCamburg 2.5 in. Spring Kit w\/ Dominator 2.0 R\/R Shocks for Jeep Gladiator JT (2020-2026)\u003c\/h2\u003e\n\u003cp\u003eCamburg's Gladiator kit takes the factory rake out of a JT and makes room for 35 to 37 in. tires. It lifts the front 2.5 in. with Camburg dual-rate coil springs, keeps the factory rear coils, and replaces all four dampers with Dominator 2.0 remote reservoir shocks valved and sized for the new ride height. Longer sway bar end links and bump stop extensions round it out.\u003c\/p\u003e\n\u003cp\u003eKeeping the stock rear springs is a deliberate call: the Gladiator already sits higher in the rear, so Camburg matched the front spring to it rather than adding rear height you do not need. That keeps the cost down and the bed loaded or empty behavior closer to stock, while the shocks do the work of controlling the extra travel. Camburg arms and track bars can be added later.\u003c\/p\u003e\n\u003cdiv class=\"nv-h\"\u003eWhy it works\u003c\/div\u003e\n\u003cdiv class=\"nv-fcards\"\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eFront dual-rate springs\u003c\/b\u003eCamburg front coils bring the nose up 2.5 in. to level the truck against the factory rear.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eDominator 2.0 R\/R shocks\u003c\/b\u003e2 in. aluminum-body shocks with remote reservoirs. The aluminum sheds heat faster than steel, so damping stays more consistent on long washboard runs.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eLonger sway bar end links\u003c\/b\u003eHeavy-duty extended end links put the sway bar back at a sensible angle once the Jeep sits higher, and leave room for more droop.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eBump stop extensions included\u003c\/b\u003eFront spacers and rear bump stop plates and strike pads keep the tire and shocks from bottoming at the new ride height.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eKeeps factory rear coils\u003c\/b\u003eThe kit works with the Gladiator's stock rear springs, so there is less to install and less to pay for.\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nv-h\"\u003eSpecifications\u003c\/div\u003e\n\u003ctable class=\"nv-spec\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eJeep Gladiator JT (2020-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift\u003c\/td\u003e\n\u003ctd\u003e2.5 in. front, 0 in. rear (uses factory rear coils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSprings\u003c\/td\u003e\n\u003ctd\u003eCamburg dual-rate front coil springs (gray)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShocks\u003c\/td\u003e\n\u003ctd\u003eCamburg Dominator 2.0 remote reservoir, front and rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTire size\u003c\/td\u003e\n\u003ctd\u003e35-37 in. per Camburg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eFront coil springs (2), shocks (4), sway bar end links (4), front bump stop spacers (2), rear bump stop base plates (2), rear strike pads (2), hardware kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e30300-0025-007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"nv-h\"\u003eBefore you order\u003c\/div\u003e\n\u003cp\u003eThis is a front lift that levels the truck; the rear stays at factory height on the stock coils. If you tow or carry heavy loads in the bed often, ask us about rear spring options first. Plan on an alignment after install. Mojave trucks use different factory suspension, so confirm fitment with us before ordering for one. Not sure it fits your build? Call or text us at \u003ca href=\"tel:+19202497744\"\u003e(920) 249-7744\u003c\/a\u003e with your year, trim and setup and we will confirm it.\u003c\/p\u003e\n\u003cdiv class=\"nv-h\"\u003eFrequently asked questions\u003c\/div\u003e\n\u003cdiv class=\"nv-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003eWhy are there no rear springs?\u003c\/summary\u003e\u003cp\u003eCamburg designed the Gladiator kit around the factory rear coils, which already match the new front ride height. The kit lifts the front 2.5 in. and the rear stays at stock height.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is included?\u003c\/summary\u003e\u003cp\u003eFront coil springs, four Dominator 2.0 remote reservoir shocks, front and rear sway bar end links, bump stop extensions and a hardware kit.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat tire size will fit?\u003c\/summary\u003e\u003cp\u003eCamburg says 35 to 37 in. tires, depending on wheel offset and bump stop setup.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill it fit the Mojave?\u003c\/summary\u003e\u003cp\u003eCamburg lists 2020-2026 Gladiator without trim exclusions, but the Mojave runs different factory suspension. Call us with your trim before ordering.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the warranty?\u003c\/summary\u003e\u003cp\u003eSee our Camburg warranty page for the current terms.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nv-xsell\"\u003e\n\u003cdiv class=\"nv-xh\"\u003eMore from Camburg Engineering\n\u003c\/div\u003e\n\u003cdiv class=\"nv-xrow\"\u003e\n\u003ca class=\"nv-xitem\" href=\"\/collections\/camburg\"\u003e\u003cb\u003eAll Camburg Engineering\u003c\/b\u003eEvery part we carry from the brand\u003c\/a\u003e\n\u003ca class=\"nv-xitem\" href=\"\/collections\/2-5-lifts\"\u003e\u003cb\u003eMore 2.5\" Lifts\u003c\/b\u003eCompare every brand we carry\u003c\/a\u003e\n\u003ca class=\"nv-xitem\" href=\"\/collections\/jeep-gladiator\"\u003e\u003cb\u003eAll Jeep Gladiator\u003c\/b\u003eBrowse parts that fit\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Why are there no rear springs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Camburg designed the Gladiator kit around the factory rear coils, which already match the new front ride height. The kit lifts the front 2.5 in. and the rear stays at stock height.\"}}, {\"@type\": \"Question\", \"name\": \"What is included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Front coil springs, four Dominator 2.0 remote reservoir shocks, front and rear sway bar end links, bump stop extensions and a hardware kit.\"}}, {\"@type\": \"Question\", \"name\": \"What tire size will fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Camburg says 35 to 37 in. tires, depending on wheel offset and bump stop setup.\"}}, {\"@type\": \"Question\", \"name\": \"Will it fit the Mojave?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Camburg lists 2020-2026 Gladiator without trim exclusions, but the Mojave runs different factory suspension. Call us with your trim before ordering.\"}}, {\"@type\": \"Question\", \"name\": \"What is the warranty?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"See our Camburg warranty page for the current terms.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"Camburg","offers":[{"title":"Default Title","offer_id":58810385170735,"sku":"30300-0025-007","price":2055.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/30300-0025-007.jpg?v=1794241460","url":"https:\/\/nvmos.com\/products\/camburg-2-5-in-spring-kit-w-dominator-2-0-r-r-shocks-for-jeep-gladiator-jt-2020-2026","provider":"NVMOS","version":"1.0","type":"link"}