C4 Fab 4Runner Overland Series Rear Bumper - 5th Gen (2010+)

  • *Please allow 14 weeks production time.

    The C4 4Runner Overland Series Rear Bumper is a full replacement for your 2010+ 4Runner that doesn't require any cutting. Comes with a license plate mount kit with a light and all the hardware you need. The camera still works. Every swing out has a camp table, holes for CB antennas, and tabs for zip ties that make it easy to run wires.

    All rear bumpers are now made WITHOUT the slots cut into the side of the bumper. The logo cut into the side of the bumper is now the new "C4" logo instead of the "C4fab" logo seen in some of these photos.
    • Bolt-on receiver hitch that maintains factory tow capacity. (hitch not DOT weight rated)
    • When bolt on hitch is removed this is the highest clearance available of any rear bumper for 5th gen 4runner.
    • Multiple mounting hole patterns on swing outs allow for various accessory mounting configurations.
    • Swing out latching systems are easy to use, heavy duty and greatly minimize swing arm shake compared to other brands on the market.
    • Main bumper structure designed with extra bracing inside to greatly reduce bumper twist and sag when swing out’s are open.
    • Swing out’s fit up to 35″ tire.
    • Bumper mounting system allows bumper to adjust in every direction so the perfect fit and finish can be achieved.
    • Light weight steel filler piece attaches to the body of the vehicle below the tail light. This piece allows for a tight fit around the tail light and an even reveal along the bumper lines to prevent unsightly gaps.
    • Compatible with C4 Summit hatch ladder and the GOBI ladder.
    • NOT compatible with 2021+ BSM
    • Base bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.
    • Made from various thicknesses of steel to reduce weight as much as possible while maintaining a very strong bumper.
    • SHIPS BARE STEEL, C4 does not offer powder coating services. Bumper will need to be painted or powder coated before installation to prevent rust.



      • On Half Swing Bumper:Tire mount must be removed to bolt on other accessories.
      • Single (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.
      • Maxtrax brand mounting pins recommended / RotoPax brand mount not included & required to use with our mount.
      • Our Rotopax/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.
      • All of our mounts can be adjusted vertically on our swing arms according to preference.


      *Shipping now included!!

      * this item is a 'made-to-order' item and requires a manufacturer's lead time, check with us regarding current lead times. Please review our policies  regarding the cancellations and returns for 'made-to-order' items.


      Ships to the FedEx freight hub nearest the customers residential address unless a commercial address is provided in which case product can be sent directly to the commercial address.

      This product can be shipped directly to a residence for an added freight charge of $90.00. Please let us know if you would like this shipped to a residential address and we will send you a custom invoice for the $90 charge.