KC HiLiTES FLEX ERA® 3 Dual-Mode SAE Fog Light Pocket Kit — Jeep JK/JL/JT Plastic Bumpers (97146)

Street-legal fogs when you need them, off-road punch when you want it. The FLEX ERA 3 Dual-Mode SAE kit drops into Jeep JK (’07–’18) and JL/JT premium plastic bumpers with included brackets and plug-in adapters, delivering an SAE J583 fog beam for on-road visibility and a selectable high-output off-road mode for the trail. The Master Kit bundles both Clear and Selective Yellow lenses, so you can tune for weather and preference. 

Why Jeep owners choose it

• Two beams, one kit — Run the SAE fog pattern on pavement, then flip the switch for a high-power off-road mode that adds spot punch.
• Clear or Selective Yellow — Pre-installed Clear lenses for max brightness; swap to Selective Yellow to cut glare in rain, snow, and dust. 
• Factory-clean fit — Includes Jeep plastic-bumper fog pocket brackets and plug-and-play adapters for a tidy, no-cut install. Customize the look — Accent
• bezels are swappable (gold standard; other colors sold separately). 

What’s in the box

• (2) FLEX ERA® 3 Dual-Mode SAE LED pods (Clear lenses pre-installed)
• (2) Selective Yellow lenses
• (2) Jeep-specific mounting brackets + round shrouds
• (2) H16 fog-light harness adapters for Jeeps
• Premium wiring harness with weatherproof connectors and 2-position switch (used to power the off-road high-beam mode) 

Performance & key specs (per light)

• Output: 3,682 lm (SAE Fog) • 5,949 lm (Dual-Mode) at 5000K
• Candela / Beam distance: 9,440 cd / 84 m (Fog) • 19,984 cd / 124.6 m (Dual-Mode)
• Power / draw: 35W / 2.9A @12V (Fog) • 55W / 4.5A @12V (Dual-Mode)
• Voltage: 9–36V • Ingress: IP65 • Size: W 3.6" × H 3.5" × D 2.6"
  Verified across KC dealer spec sheets for 97146. 

Fitment

• Jeep Wrangler JK (2007–2018) — plastic front bumper (Sport-S, Sahara, Rubicon)
• Jeep Wrangler JL (2018–2024) — premium plastic front bumper (Sahara, Rubicon & Special Edition)
• Jeep Gladiator JT (2020–2024) — premium plastic front bumper (Sahara, Rubicon & Special Edition)
  Does not fit JL/JT OE Sport/Sport-S plastic bumper. For JL/JT steel bumpers, use KC’s G4 or the JL/JT-specific steel-bumper kits instead. 

Install notes

Use the H16 adapters to plug each pod into your Jeep’s factory fog circuit for the SAE mode. To enable the off-road high-beam, connect the included 2-position harness/switch to a fused 12V source. Aim low for fog mode to maintain a clean cutoff and compliance. (Off-road mode is for off-highway use.)