KC HiLiTES 7" Gravity® LED DOT Headlight - Driving Beam - Pair - 07-18 Jeep JK

See farther with a clean, street-legal beam. KC 7" Gravity LED DOT headlights use GRD (Gravity® Reflective Diode) optics and premium CREE/Nichia LEDs to deliver crisp low and high beams at a natural 5000K. Built-in DRL and anti-flicker electronics make these a true plug-and-play upgrade for 2007–2018 Jeep Wrangler JK/JKU. Rugged IP68 sealing, die-cast housings, and hard-coated poly lenses keep you rolling after dark and on the trail. 

Why JK owners choose Gravity

• Street-legal performance: Fully DOT-compliant low/high beams provide focused distance and width without glare. 
• Real, measured output: Per light — Low 1,260 lm / 415 lx @10 m / 407 m, High 3,666 lm / 775 lx @10 m / 557 m. Efficient power draw (18–22 W) keeps loads in check. 
• Plug-and-play for JK: Integrated anti-flicker, DRL, and JK-friendly wiring for a clean, error-free install. 
• Built trail-tough: IP68 weather rating; die-cast aluminum housings with hard-coated polycarbonate lenses.

What’s in the box

• (2) 7" Gravity® LED headlights (DOT Driving beam; Low/High + DRL)
• Plug-and-play adapters / anti-flicker electronics
• Mounting instructions
  (Kit contents may vary slightly by distributor; JK sets are plug-and-play.) 

Performance & key specs (per light)

• Raw lumens: Low 1,260 • High 3,666
• Lux @10 m: Low 415 • High 775
• Beam distance (1 lx): Low 407 m • High 557 m
• Wattage: 18 W (Low) • 22 W (High) • DRL 275 lm
• LEDs: CREE XHP35 HI + Nichia • CCT: 5000K
• Voltage: 9–18 V • Ingress: IP68
  Numbers verified from KC dealer spec sheets for 42351. 

Fitment

• Jeep Wrangler JK / JKU (2007–2018) — direct 7" round replacement. (Also fits other 7" round applications with appropriate wiring.) 

Install notes

Pull the JK grille and bezels, swap the lamps, connect the plug-and-play harness, and aim per KC’s guide. The built-in anti-flicker module eliminates CAN-bus errors and flicker on JKs. Typical driveway install time: about an hour.