{"title":"Ineos Grenadier","description":"\u003cp\u003eThe Ineos Grenadier brought back the honest solid-axle expedition wagon, and its aftermarket is growing fast — NVMOS stocks it as it lands. This collection gathers Grenadier-specific gear including DVA Mechanics accessories and Goose Gear storage solutions, alongside expedition equipment proven on the platform. If you’re building one of the first serious Grenadiers in the States, you’ve found the right shelf — and we’re glad to chase down what you need next.\u003c\/p\u003e","products":[{"product_id":"ineos-grenadier-2024-present-1st-gen-venture-series-roof-conversion-interior-rci-shower-kit-add-on","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Venture Series - Roof Conversion Interior (RCI) - Shower Kit Add-On","description":"\u003cp\u003eGoose Gear's Venture Series Roof Conversion Interior (RCI) turns the Ineos Grenadier into a legitimate live-in rig; this Shower Kit Add-On gives the build a dedicated wash station. Centered on a custom-cut bamboo panel that mounts at the rear driver-side gull wing window opening, the kit puts a Scandvik shower mixer with an on\/off trigger handle and a National Luna LED light right where you need them — rinse off trail dust, muddy dogs, or dinner dishes without dragging out a separate setup.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCustom-cut bamboo mounting panel with installation hardware\u003c\/li\u003e\n\u003cli\u003eScandvik shower mixer with an on\/off trigger handle for simple water control\u003c\/li\u003e\n\u003cli\u003eNational Luna LED light for after-dark washups\u003c\/li\u003e\n\u003cli\u003eMounts at the rear driver-side (LH) gull wing window opening\u003c\/li\u003e\n\u003cli\u003ePurpose-built add-on for the Venture Series RCI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis kit fits the 2024-present first-generation Ineos Grenadier equipped with the \u003ca href=\"\/products\/ineos-grenadier-2024-present-1st-gen-venture-series-roof-conversion-interior-rci\"\u003eVenture Series Roof Conversion Interior (RCI)\u003c\/a\u003e. Note the prerequisite: a gull wing window on the rear driver side, installed by a third party before the shower panel goes in — the window and its installation are not included. Unlike the drawer-module-based Explore Series, the Venture Series is built on an internal extrusion frame, and this kit is designed for that architecture. See the rest of the system in our \u003ca href=\"\/collections\/ineos-grenadier\"\u003eIneos Grenadier collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Goose Gear","offers":[{"title":"Default Title","offer_id":55887105130799,"sku":"60005-GGR-SH","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/FullSizeRender_507b30d2-cd4b-4364-8335-34dbc3a91141.jpg?v=1777045392"},{"product_id":"ineos-grenadier-2024-present-1st-gen-venture-series-roof-conversion-interior-rci","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Venture Series - Roof Conversion Interior (RCI)","description":"\u003cp\u003eHello and welcome to the long-anticipated Roof Conversion Interior (RCI) for the Ineos Grenadier.\u003c\/p\u003e\n\u003cp\u003eThis product series is in a line called Venture Series and is defined by an internal extrusion frame, as opposed to our current offering called the Explore Series, which features items like our CampKitchen and drawer modules.\u003c\/p\u003e\n\u003ch3\u003eKit Packages\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eVenture Series Roof Conversion Interior (RCI):\u003c\/strong\u003e RH Drawer Module, LH Sink Module and LH Water Module. $12,000.00. Ships bare, without water or electrical options and without panel cutouts for electrical or water systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVenture Series Rear Plate and Second Row Seat Delete:\u003c\/strong\u003e RH Drawer Module, LH Sink Module and LH Water Module. $14,000.00. Ships bare, without water or electrical options and without panel cutouts for electrical or water systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVenture Series RCI with Water and Power Systems:\u003c\/strong\u003e RH Drawer Module, LH Sink Module and LH Water Module. $17,000.00.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVenture Series Rear Plate and Second Row Seat Delete with Water and Power Systems:\u003c\/strong\u003e RH Drawer Module, LH Sink Module and LH Water Module. $19,000.00.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Shower Kit:\u003c\/strong\u003e includes window panel, shower control and National Luna Light. $950.00. Requires a Gull Wing Window by others.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWater and Power Systems Include\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePair of high power \u003cstrong\u003e100-watt\u003c\/strong\u003e USB C chargers\u003c\/li\u003e\n\u003cli\u003eBlue Sea Weatherdeck 7 Switch Panel with integrated circuit breakers\u003c\/li\u003e\n\u003cli\u003ePair of Egis relays for master power switch and water heater\u003c\/li\u003e\n\u003cli\u003eSingle Baja Designs Rock Light for the cabinet interior top shelf\u003c\/li\u003e\n\u003cli\u003eConnections for an optional single National Luna exterior light for the shower kit\u003c\/li\u003e\n\u003cli\u003eCustom built wire harness by Blaze Offroad, SAE grade connections using premium GXL wire where possible and premium connectors. Not knock off terminals or connectors.\u003c\/li\u003e\n\u003cli\u003e50-amp fused power supply cable kit from the factory second battery location to the LH Sink Module interior, with 50-amp Anderson connector (6 gauge main power)\u003c\/li\u003e\n\u003cli\u003eAmbassador Marine sink\u003c\/li\u003e\n\u003cli\u003eScandvik water faucet\u003c\/li\u003e\n\u003cli\u003eWhale Marine hot water heater, 12v, 3 gallon\u003c\/li\u003e\n\u003cli\u003eWhale Marine water pump with expansion tank, 12v\u003c\/li\u003e\n\u003cli\u003eWhale Marine water fittings and piping where possible (some items require flexible tubing)\u003c\/li\u003e\n\u003cli\u003eTwo custom mounting plates for the water heater and water pump for a 100% bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional Shower Panel Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCustom cut bamboo mounting panel with hardware\u003c\/li\u003e\n\u003cli\u003eScandvik shower mixer with on\/off trigger handle\u003c\/li\u003e\n\u003cli\u003eNational Luna LED light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAlready Have the Goose Gear Grenadier Rear Plate or Second Row Delete?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRear plate:\u003c\/strong\u003e You can keep it, and everything will work just fine. The redesigned plate has a couple of additional mounting points, and excess mounting locations that are not needed have been removed.\u003c\/p\u003e\n\u003cp\u003eIf you still want to replace your existing plate with the newer version, the cost is $400.00 with the purchase of an RCI interior kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSecond row delete:\u003c\/strong\u003e There are two options.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeep the existing second row delete. The system will work just fine.\u003c\/li\u003e\n\u003cli\u003eUpgrade your second row delete for $500.00 with the purchase of an RCI interior kit. You get a completely new second row delete with hardware, and you can sell the old one on the used market for about $800-$1,000. This is below our cost on this item, but we want you to have the option for the best possible build.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a one-time offer and only applies to the original purchaser of a seat delete or second row delete.\u003c\/p\u003e","brand":"Goose Gear","offers":[{"title":"Option 1 - Venture Series - LH Sink Module - LH Water Module - RH Drawer Module - Bare","offer_id":55887110406447,"sku":"60001-GGR-SH","price":12900.0,"currency_code":"USD","in_stock":true},{"title":"Option 2 - Venture Series - Rear Plate - Second Row Delete - LH Sink Module - LH Water Module - RH Drawer Module - Bare","offer_id":55887110439215,"sku":"60002-GGR-SH","price":14900.0,"currency_code":"USD","in_stock":true},{"title":"Option 3 - Venture Series - LH Sink Module - LH Water Module - RH Drawer Module - Water and Power Systems","offer_id":55887110471983,"sku":"60003-GGR-SH","price":17900.0,"currency_code":"USD","in_stock":true},{"title":"Option 4 - Venture Series - Rear Plate - Second Row Delete - LH Sink Module - LH Water Module - RH Drawer Module - Water and Power Systems","offer_id":55887110504751,"sku":"60004-GGR-SH","price":19900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-2024-present-1st-gen-venture-series-roof-conversion-interior-rci-4951256.jpg?v=1777045393"},{"product_id":"ineos-grenadier-2024-present-1st-gen-venture-series-roof-conversion-interior-base-plate-package","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Venture Series - Roof Conversion Interior Base Plate Package","description":"\u003cdiv class=\"anchor-h4\"\u003e \u003ch4 class=\"headingSpacingAbove headingSpacingBelow\" id=\"the-ineos-grenadier,-venture-series-base-plate-package-for-the-goose-gear-roof-conversion-interior-is-here-and-ready-to-set-the-\"\u003eThe INEOS Grenadier, Venture Series Base Plate Package for the Goose Gear Roof Conversion Interior is here and ready to set the foundation for your interior build.\u003cspan class=\"a_wh3f9_A4j40\"\u003e\u003c\/span\u003e \u003c\/h4\u003e \u003ci aria-hidden=\"true\" class=\"a_goydH_A4j40 f_01LKv_A4j40 css-181\"\u003e\u003c\/i\u003e \u003c\/div\u003e \u003cp class=\"noSpacingAbove noSpacingBelow\" data-text-type=\"noSpacing\"\u003eThis package includes the Rear Plate System as well as the Second Row Seat Delete Plate System designed specifically for the RCI.\u003c\/p\u003e \u003cdiv class=\"anchor-h4\"\u003e \u003ch4 class=\"headingSpacingAbove headingSpacingBelow\" id=\"rear-plate-system-features\"\u003e \u003ci\u003eRear Plate System Features\u003c\/i\u003e\u003cspan class=\"a_wh3f9_A4j40\"\u003e\u003c\/span\u003e \u003c\/h4\u003e \u003ci aria-hidden=\"true\" class=\"a_goydH_A4j40 f_01LKv_A4j40 css-181\"\u003e\u003c\/i\u003e \u003c\/div\u003e \u003cp\u003eThis is a revised version of the existing Goose Gear Rear Plate System for the INEOS Grenadier.  This plate is designed specifically for the Roof Conversion Interior, such as the Alu-Cab Silenus Roof Conversion.\u003c\/p\u003e \u003cp\u003eThis system requires the removal of the rear factory floor liner and anchor points. Does not require cutting or drilling of any part of the vehicle. Once the plate is installed you now have a clean and flat surface. \u003cbr\u003e\u003cbr\u003eIf you already have the existing rear plate system for your Grenadier, it will work with the Roof Conversion Interior perfectly. This redesign only added two additional anchor points for the RCI Modules and removed most of the unused anchor points that would simply be covered up in the RCI Interior. It is not a requirement for the RCI. But if you plan on purchasing the RCI and do not already own the rear plate, this is the model we would recommend.\u003c\/p\u003e \u003cp\u003eUsable Space is approximately 41-5\/8\" (1058mm) Wide X 34-3\/4\" (885mm) Long\u003c\/p\u003e \u003cp\u003ePlate Weight is approximately 27 pounds (12.2 kilograms)\u003c\/p\u003e \u003cdiv class=\"anchor-h4\"\u003e \u003ch4 class=\"headingSpacingAbove headingSpacingBelow\" id=\"second-row-delete-plate-system-features\"\u003e \u003ci\u003eSecond Row Delete Plate System Features\u003c\/i\u003e\u003cspan class=\"a_wh3f9_A4j40\"\u003e\u003c\/span\u003e \u003c\/h4\u003e \u003ci aria-hidden=\"true\" class=\"a_goydH_A4j40 f_01LKv_A4j40 css-181\"\u003e\u003c\/i\u003e \u003c\/div\u003e \u003cp\u003eThe Ineos Grenadier - Venture Series Second Row Delete was designed specifically for the Venture Series - Roof Conversion Interior (RCI) such as the Alu-Cab Silenus Roof Conversion. If you have the original design Goose Gear second row delete you are still good to go for the Roof Conversion Interior. Upon the final design of the RCI we opted to create a second option that provides easier access to the storage space that resides behind the front row seats in the second row footwell. This reduction in plate length has opened up additional storage options and usability. If you are planning on installing a full RCI and already have the original design second row delete, please contact us to discuss your options for upgrading to the new design.\u003c\/p\u003e \u003cp\u003eThis 100% second row delete requires the removal of the seat, seat frame, and the surrounding plastic trim panels that house electrical components under the factory seat.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"customListStyle\"\u003e \u003cli\u003e\u003cstrong\u003eRear Plate Required, this unit will work with either the original Explore Series Rear Plate or the new Venture Series Roof Conversion Interior Base Plate\u003c\/strong\u003e\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eLarge Access Hatches\u003c\/strong\u003e: Convenient hatches allow easy access to batteries and other electrical components without removing the delete plate.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eNo Drilling or Cutting Needed\u003c\/strong\u003e: This system installs without any modifications to your vehicle, ensuring easy and straightforward installation.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eDimensions \u0026amp; Weight:\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"customListStyle\"\u003e \u003cli\u003eUsable space measures between \u003cstrong\u003e41-3\/4” (1055mm) to 53” (1345mm) wide\u003c\/strong\u003e and \u003cstrong\u003e28-1\/4” (715mm) long\u003c\/strong\u003e.\u003c\/li\u003e \u003cli\u003eThe plate weighs approximately \u003cstrong\u003e41 pounds (18.6 kilograms)\u003c\/strong\u003e, with a weight savings of \u003cstrong\u003e83 pounds (37.6 kilograms)\u003c\/strong\u003e when replacing the factory rear seat, which weighs 124 pounds (56 kilograms).\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eAdditional Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul class=\"customListStyle\"\u003e \u003cli\u003eCreates a continuous, flat surface when paired with the Goose Gear Rear Plate System.\u003c\/li\u003e \u003cli\u003eCustom-sized hatches provide easy access to electrical components.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Goose Gear","offers":[{"title":"100% \/ Include Shipping","offer_id":55887138816303,"sku":"6734-GGR-SH","price":2295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-2024-present-1st-gen-venture-series-roof-conversion-interior-base-plate-package-2001613_4937003a-7190-4f2c-955e-82c73b89d688.jpg?v=1777045396"},{"product_id":"ineos-grenadier-2024-present-1st-gen-venture-series-rci-rear-plate-system","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Venture Series - RCI Rear Plate System","description":"\u003cp\u003eThis is a revised version of the existing Goose Gear Rear Plate System for the Ineos Grenadier.  This plate is designed specifically for the Roof Conversion Interior, such as the Alu-Cab Silenus Roof Conversion.\u003c\/p\u003e \u003cp\u003eThis system requires the removal of the rear factory floor liner and anchor points. Does not require cutting or drilling of any part of the vehicle. Once the plate is installed you now have a clean and flat surface. \u003cbr\u003e\u003cbr\u003eIf you already have the existing rear plate system for your Grenadier, it will work with the Roof Conversion Interior perfectly. This redesign only added two additional anchor points for the RCI Modules and removed most of the unused anchor points that would simply be covered up in the RCI Interior. It is not a requirement for the RCI. But if you plan on purchasing the RCI and do not already own the rear plate, this is the model we would recommend.\u003c\/p\u003e \u003cp\u003eUsable Space is approximately 41-5\/8\" (1058mm) Wide X 34-3\/4\" (885mm) Long\u003c\/p\u003e \u003cp\u003ePlate Weight is approximately 27 pounds (12.2 kilograms)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cem\u003eImages shown reflect the rear plate as well as the second row delete for the RCI Venture Series Interior.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Goose Gear","offers":[{"title":"Include Shipping","offer_id":57195023335727,"sku":"1897-GGR-SH","price":945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-2024-present-1st-gen-venture-series-rci-rear-plate-system-5722498_efc37885-9b6a-4d58-90b9-d5b6530e4dd7.jpg?v=1777045398"},{"product_id":"ineos-grenadier-2024-present-1st-gen-venture-series-second-row-seat-delete-plate-system","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Venture Series - RCI Second Row Seat Delete Plate System","description":"\u003cp\u003eThe Ineos Grenadier - Venture Series Second Row Delete was designed specifically for the Venture Series - Roof Conversion Interior (RCI) such as the Alu-Cab Silenus Roof Conversion. If you have the original design Goose Gear second row delete you are still good to go for the Roof Conversion Interior. Upon the final design of the RCI we opted to create a second option that provides easier access to the storage space that resides behind the front row seats in the second row footwell. This reduction in plate length has opened up additional storage options and usability. If you are planning on installing a full RCI and already have the original design second row delete, please contact us to discuss your options for upgrading to the new design.\u003c\/p\u003e \u003cp\u003eThis 100% second row delete requires the removal of the seat, seat frame, and the surrounding plastic trim panels that house electrical components under the factory seat.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003cb\u003eRear Plate Required, this unit will work with either the original Explore Series Rear Plate or the new Venture Series Roof Conversion Interior Base Plate\u003c\/b\u003e\u003c\/li\u003e \u003cli\u003e \u003cb\u003eLarge Access Hatches\u003c\/b\u003e: Convenient hatches allow easy access to batteries and other electrical components without removing the delete plate.\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNo Drilling or Cutting Needed\u003c\/b\u003e: This system installs without any modifications to your vehicle, ensuring easy and straightforward installation.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003eDimensions \u0026amp; Weight:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUsable space measures between \u003cb\u003e41-3\/4” (1055mm) to 53” (1345mm) wide\u003c\/b\u003e and \u003cb\u003e28-1\/4” (715mm) long\u003c\/b\u003e.\u003c\/li\u003e \u003cli\u003eThe plate weighs approximately \u003cstrong\u003e41 p\u003c\/strong\u003e\u003cb\u003eounds (18.6 kilograms)\u003c\/b\u003e, with a weight savings of \u003cstrong\u003e83\u003c\/strong\u003e\u003cb\u003e pounds (37.6 kilograms)\u003c\/b\u003e when replacing the factory rear seat, which weighs 124 pounds (56 kilograms).\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003eAdditional Features:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCreates a continuous, flat surface when paired with the Goose Gear Rear Plate System.\u003c\/li\u003e \u003cli\u003eCustom-sized hatches provide easy access to electrical components.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Goose Gear","offers":[{"title":"100% \/ Include Shipping","offer_id":55887142256943,"sku":"1894-GGR-SH","price":1495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-2024-present-1st-gen-venture-series-rci-second-row-seat-delete-plate-system-7312078.jpg?v=1777045400"},{"product_id":"ineos-grenadier-quartermaster-2025-present-1st-gen-explore-series-second-row-seat-delete-plate-system-100","title":"Ineos - Grenadier Quartermaster - 2025-Present - 1st Gen - Explore Series - Second Row Seat Delete Plate System 100%","description":"\u003cp\u003eMaximize the functionality of your Ineos Grenadier Quartermaster with the \u003cb\u003eSecond Row Seat Delete Plate System™\u003c\/b\u003e, engineered to provide ample storage space and compatibility with Goose Gear Modules or your own custom storage system and accessories. This 100% second-row delete requires the removal of the seat, seat frame, and the surrounding plastic trim panels that house electrical components under the factory seat.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e \u003cb\u003eLarge Access Hatches\u003c\/b\u003e: Convenient hatches allow easy access to batteries and other electrical components without removing the delete plate.\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNo Drilling or Cutting Needed\u003c\/b\u003e: This system installs without any modifications to your vehicle, ensuring easy and straightforward installation.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003eDimensions \u0026amp; Weight:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUsable space measures between \u003cb\u003e54” (1370mm) to 22” (560mm)\u003c\/b\u003e \u003c\/li\u003e \u003cli\u003eThe plate weighs approximately \u003cstrong\u003e36.5\u003c\/strong\u003e\u003cb\u003e pounds (16.4 kilograms)\u003c\/b\u003e, with a weight savings of \u003cb\u003e87.5 pounds (39.6 kilograms)\u003c\/b\u003e when replacing the factory rear seat, which weighs 124 pounds (56 kilograms).\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003eAdditional Features:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCreates a continuous, flat surface in the second row seat area.\u003c\/li\u003e \u003cli\u003eCustom-sized hatches provide easy access to electrical components.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Goose Gear","offers":[{"title":"100% \/ Include Shipping","offer_id":55887179743535,"sku":"1891-GGR-SH","price":1495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-quartermaster-2025-present-1st-gen-explore-series-second-row-seat-delete-plate-system-100-901271_cb8b2167-0dd4-4801-b4a1-e1c0c186d262.jpg?v=1777045415"},{"product_id":"ineos-grenadier-2024-present-1st-gen-explore-series-stealth-sleep-storage-package","title":"Ineos – Grenadier – 2024‑Present – 1st Gen – Explore Series – Stealth Sleep \u0026 Storage Package","description":"\u003cp class=\"p1\"\u003eTurn your Ineos Grenadier into the ultimate adventure-ready vehicle with our Stealth Sleep \u0026amp; Storage Package, built for comfort, organization, and convenience. This modular system lets you sleep two and carry all your gear—perfect for long‑haul overland trips.\u003c\/p\u003e \u003cp class=\"p3\"\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e \u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eRear Plate System\u003c\/b\u003e\u003c\/span\u003e – Serves as the primary mounting surface for the Side × Side Drawer Module.\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003e100% Second‑Row Plate‑Based Seat Delete\u003c\/b\u003e\u003c\/span\u003e – Fully removes the second row to create a flat, continuous platform for sleeping and storage; protects all electrical systems with hatches for easy access.\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003e40% Passenger‑Side Module‑Based Seat Delete\u003c\/b\u003e\u003c\/span\u003e – Mounts directly atop the Second‑Row Plate to expand your storage capacity while retaining access to wiring and vents.\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003e60% Driver‑Side Module‑Based Seat Delete\u003c\/b\u003e\u003c\/span\u003e – Also mounts atop the Second‑Row Plate, adding even more storage space and protecting vehicle systems.\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eSide × Side Drawer Module w\/ Top Plate\u003c\/b\u003e\u003c\/span\u003e – Attaches to the Rear Plate System; lockable drawers with drawer‑face finishes selectable in either black or gray. Choose your preferred split configuration (1\/2‑1\/2, 1\/3‑2\/3, or 2\/3‑1\/3) to suit your packing style.\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003ePair of Pillow Extensions\u003c\/b\u003e\u003c\/span\u003e – For added comfort when sharing with a taller passenger (over 6’2”).\u003c\/p\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cp class=\"p1\"\u003eThis package lets you rest easy on the road while maximizing your Grenadier’s cargo capacity, whether you’re chasing remote trails or camping under the stars.\u003c\/p\u003e","brand":"Goose Gear","offers":[{"title":"Standard \/ 50\/50 - Black \/ Include Shipping","offer_id":55887208972591,"sku":"4129-GGR-SH","price":6495.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ 50\/50 - Gray \/ Include Shipping","offer_id":57195050631471,"sku":"4130-GGR-SH","price":6495.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ 1\/3-2\/3 - Black \/ Include Shipping","offer_id":57195050664239,"sku":"4131-GGR-SH","price":6495.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ 1\/3-2\/3 - Gray \/ Include Shipping","offer_id":57195050697007,"sku":"4132-GGR-SH","price":6495.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ 2\/3-1\/3 - Black \/ Include Shipping","offer_id":57195050729775,"sku":"4133-GGR-SH","price":6495.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ 2\/3-1\/3 - Gray \/ Include Shipping","offer_id":57195050762543,"sku":"4134-GGR-SH","price":6495.0,"currency_code":"USD","in_stock":true}]},{"product_id":"ineos-grenadier-2024-present-1st-gen-explore-series-brad-s-favorite-package","title":"Grenadier - 2024-Present - 1st Gen - Explore Series - Brad's Favorite Package","description":"\u003cp class=\"noSpacingAbove noSpacingBelow\" data-text-type=\"noSpacing\"\u003eBrad's (@trailrecon) Favorite Package is a complete sleep and kitchen solution for your Ineos Grenadier allowing for a single adult to sleep on the passenger side, lots of additional storage, a Dometic Coolmatic CD30 Fridge Drawer along with a mud room on the driver's side to allow for easy access and a convenient place to put your shoes, bags or even an additional strap down a fridge.\u003c\/p\u003e \u003cp\u003eBrad's Package includes:\u003c\/p\u003e \u003cul class=\"customListStyle\"\u003e \u003cli\u003eRear Plate System\u003c\/li\u003e \u003cli\u003e100% Second Row Plate-Based Seat Delete\u003c\/li\u003e \u003cli\u003e60% Module Based Seat Delete\u003c\/li\u003e \u003cli\u003eSingle Drawer Module\u003c\/li\u003e \u003cli\u003eDometic Drawer Refrigerator Module with Dometic CD30 Refrigerator\u003c\/li\u003e \u003cli\u003ePillow Extension for the 60% Seat Delete\u003c\/li\u003e \u003c\/ul\u003e","brand":"Goose Gear","offers":[{"title":"Black \/ Included","offer_id":55887218606383,"sku":"1858-GGR-SH","price":6295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/grenadier-2024-present-1st-gen-explore-series-brads-favorite-package-604105_d432d262-f020-4da4-9f37-c319347aafff.jpg?v=1777045469"},{"product_id":"ineos-grenadier-2024-present-1st-gen-explore-series-drawer-refrigerator-module-w-fitted-top-plate-19-3-16w-x-10h-x-34d","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Explore Series - Drawer Refrigerator Module w\/Fitted Top Plate - 19-1\/4\"w x 10\"h x 34\"d","description":"\u003cp\u003eEnhance your Ineos Grenadier’s storage and convenience with our custom Fridge Drawer Module, designed specifically for the Dometic Coolmatic CD30 fridge. Built using our durable MaxLite extrusion, this unit features a Fitted Top Plate crafted from high-quality Baltic birch and finished with a rugged bed liner material for long-lasting protection.\u003c\/p\u003e \u003cp\u003eThis module integrates seamlessly with the Ineos Grenadier’s seat delete system, but requires the \u003cb\u003eRear Plate (SKU 1423-GGR-SH)\u003c\/b\u003e for installation. Choose to install the fridge module on either the \u003cb\u003eDriver’s\u003c\/b\u003e or \u003cb\u003ePassenger’s\u003c\/b\u003e side, then add the corresponding \u003cb\u003e40% or 60% Module-Based Seat Delete\u003c\/b\u003e to create a full sleeping platform. This system allows you to maximize both storage and sleeping space for two people while on the go.\u003c\/p\u003e \u003cp\u003eWith dimensions of 19-1\/4”W x 10”H x 34”D, this fridge drawer provides ample cold storage without compromising space or function.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation Tip:\u003c\/strong\u003e \u003cspan data-teams=\"true\"\u003eIf installing the Dometic Fridge Drawer adjacent to a storage drawer, be sure to install the storage drawer first.  The fridge drawer installation brackets allow for some adjustment, whereas the storage drawer brackets do not.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e The fridge does not come pre-wired for your vehicle, so professional installation or electrical expertise is recommended.\u003c\/p\u003e \u003cp\u003eUpgrade your Ineos Grenadier with this Fridge Drawer Module, engineered for strength, durability, and a flawless fit, to transform your vehicle into the ultimate overland setup.\u003c\/p\u003e","brand":"Goose Gear","offers":[{"title":"Driver’s Side","offer_id":55887301280047,"sku":"1147-GGR-SH","price":2095.0,"currency_code":"USD","in_stock":true},{"title":"Passenger's Side","offer_id":57195139334447,"sku":"1148-GGR-SH","price":2095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-2024-present-1st-gen-explore-series-drawer-refrigerator-module-wfitted-top-plate-19-316w-x-10h-x-34d-181469_8a1b0b4b-c020-4156-8cbb-578141102ee4.jpg?v=1777045612"},{"product_id":"ineos-grenadier-2024-present-1st-gen-explore-series-stealth-sleep-chef-package","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Explore Series - Stealth Sleep \u0026 Chef Package","description":"\u003cp\u003eTurn your Ineos Grenadier into the ultimate adventure-ready vehicle with our \u003cb\u003eStealth Sleep \u0026amp; Chef Package\u003c\/b\u003e, built for comfort, storage, and convenience. This package offers space for two people to sleep while providing abundant storage and a built-in fridge for extended trips.\u003c\/p\u003e \u003cp\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e \u003cb\u003eRear Plate System\u003c\/b\u003e – Serves as a solid foundation for the seat delete and storage modules.\u003c\/li\u003e \u003cli\u003e \u003cb\u003e100% Second Row Plate-Based Seat Delete\u003c\/b\u003e – Optimizes space while protecting OEM electronics.\u003c\/li\u003e \u003cli\u003e \u003cb\u003e40% Passenger Side Module-Based Seat Delete\u003c\/b\u003e – Expands your storage capacity.\u003c\/li\u003e \u003cli\u003e \u003cb\u003e60% Driver Side Module-Based Seat Delete\u003c\/b\u003e – Adds more storage while ensuring your vehicle’s systems remain protected.\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSingle Drawer Module w\/ Fitted Top Plate - Driver’s Side\u003c\/b\u003e (22-3\/16”W x 10”H x 34”D) – Lockable storage with the choice of \u003cb\u003egray or black\u003c\/b\u003e drawer face.\u003c\/li\u003e \u003cli\u003e \u003cb\u003eDometic Drawer Refrigerator Module w\/ Fitted Top Plate - Passenger Side\u003c\/b\u003e (19-3\/16”W x 10”H x 34”D) – Includes a Dometic CD30 fridge drawer, keeping your food and drinks cold.\u003c\/li\u003e \u003cli\u003e \u003cb\u003ePair of Pillow Extensions\u003c\/b\u003e – For extra sleeping confront for those over 6'2\" tall.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003ePlease note:\u003c\/b\u003e The fridge is not pre-wired for your vehicle. Professional installation or electrical expertise is recommended for setup. The design has the refrigerator on the passenger side of the vehicle and is not switchable to the driver's side without purchasing new top plates for the fridge and the drawer module.\u003c\/p\u003e \u003cp\u003eThis package allows you to rest easy on the road while maximizing your vehicle’s storage, perfect for long-term adventures.\u003c\/p\u003e","brand":"Goose Gear","offers":[{"title":"Black","offer_id":55887304491311,"sku":"1155-GGR-SH","price":7095.0,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":57195143430447,"sku":"1157-GGR-SH","price":7095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-2024-present-1st-gen-explore-series-stealth-sleep-chef-package-388477_93e8b67a-5f16-421b-b33c-fb2b955b13cc.jpg?v=1777045621"},{"product_id":"ineos-grenadier-2024-present-1st-gen-explore-series-second-row-delete-reclining-bracket-pair","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Explore Series - Second Row Delete - Reclining Bracket - Pair","description":"","brand":"Goose Gear","offers":[{"title":"Default Title","offer_id":55887318090031,"sku":"6594-GGR-SH","price":129.0,"currency_code":"USD","in_stock":true}]},{"product_id":"ineos-grenadier-2024-present-1st-gen-explore-series-camp-kitchen-2-2-to-sleep-and-storage-platform-adapter","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Explore Series - Camp Kitchen 2.2 to Sleep and Storage Platform Adapter","description":"","brand":"Goose Gear","offers":[{"title":"Default Title","offer_id":55887320875311,"sku":"6606-GGR-SH","price":195.0,"currency_code":"USD","in_stock":true}]},{"product_id":"ineos-grenadier-2024-present-1st-gen-explore-series-brians-favorite-sleep-package","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Explore Series - Brian's Favorite Sleep Package","description":"\u003cp\u003eBrian's Favorite Sleep Package is a complete sleep solution for your Ineos Grenadier allowing for a single adult to sleep on the passenger side.  The package provides additional storage under the module height seat delete on the passenger side, along with a mud room on the driver's side to allow for easy access and a convenient place to put your shoes, bags or even an additional strap down a fridge.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eRear Plate System\u003c\/strong\u003e – Serves as a solid foundation for the seat delete and storage modules.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003e100% Second Row Plate-Based Seat Delete\u003c\/strong\u003e – Optimizes space while protecting OEM electronics.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003e60% Driver Side Module-Based Seat Delete\u003c\/strong\u003e – Adds more storage while ensuring your vehicle’s systems remain protected.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eSingle Drawer Module w\/ Fitted Top Plate - Passenger Side\u003c\/strong\u003e (22-3\/16”W x 10”H x 34”D) – Lockable storage with the choice of \u003cstrong\u003egray or black\u003c\/strong\u003e drawer face.  Fitted top plate allows for more storage beneath the plate between the drawer and vehicle wall.\u003c\/li\u003e \u003cli\u003e\u003cstrong\u003eCampKitchen 2.2\u003c\/strong\u003e\u003c\/li\u003e \u003cli\u003e \u003cb\u003eSingle Pillow Extension\u003c\/b\u003e – For extra sleeping comfort for those over 6'2\" tall.\u003cstrong\u003e\u003c\/strong\u003e \u003c\/li\u003e \u003c\/ul\u003e","brand":"Goose Gear","offers":[{"title":"Black","offer_id":55887323332911,"sku":"1154-GGR-SH","price":6495.0,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":57195141136687,"sku":"1156-GGR-SH","price":6495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-2024-present-1st-gen-explore-series-brians-favorite-sleep-package-979059_f16413b6-5ccd-49f4-8415-0296e940cb2b.jpg?v=1777045617"},{"product_id":"ineos-grenadier-2024-present-1st-gen-explore-series-brians-favorite-package","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Explore Series - Brian's Favorite Package","description":"\u003cp\u003eBrian's Favorite Package is a complete camping solution for your Grenadier. This package is very similar to the system that we have ran in various vehicles since our company's beginning.\u003c\/p\u003e \u003cp\u003eBrains Favorite Package includes:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRear Plate System\u003c\/li\u003e \u003cli\u003eCampKitchen 2.2\u003c\/li\u003e \u003cli\u003eSingle Drawer Module 22-3\/16\"W x 10\"H x 34\"D\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eBy utilizing a 34\" drawer we gain storage that is easily accessible. This drawer module includes a fitted top plate that leaves plenty of room on top for your personal gear; things like sleeping bags, pillows and food. With the ability to keep gear on top of the CampKitchen you can store your entire pantry.\u003cbr\u003e\u003cbr\u003e\u003ci\u003eDoes not include National Luna Fridge, CookPartner Stove and Utensil Box.\u003c\/i\u003e\u003c\/p\u003e","brand":"Goose Gear","offers":[{"title":"CampKitchen on Driver Side \/ Black \/ Include Shipping","offer_id":55887514829103,"sku":"3431-GGR-SH","price":4470.0,"currency_code":"USD","in_stock":true},{"title":"CampKitchen on Driver Side \/ Gray \/ Include Shipping","offer_id":55887514861871,"sku":"3433-GGR-SH","price":4470.0,"currency_code":"USD","in_stock":true},{"title":"CampKitchen on Passenger Side \/ Black \/ Include Shipping","offer_id":55887514894639,"sku":"3430-GGR-SH","price":4470.0,"currency_code":"USD","in_stock":true},{"title":"CampKitchen on Passenger Side \/ Gray \/ Include Shipping","offer_id":55887514927407,"sku":"3432-GGR-SH","price":4470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-2024-present-1st-gen-explore-series-brians-favorite-package-898130.jpg?v=1777045684"},{"product_id":"ineos-grenadier-2024-present-1st-gen-explore-series-single-drawer-drawer-module-w-fitted-top-plate","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Explore Series - Single Drawer Drawer Module w\/Fitted Top Plate","description":"\u003cp\u003eThis Single Drawer Module is designed for either the Passenger Side or Driver Side of the Ineos Grenadier and is equipped with a fitted top plate and side access hatch. This Drawer Module has an exterior dimension of 22-3\/16\"W x 10\"H x 34\"D.\u003cbr\u003e\u003cbr\u003eSingle Drawer Module with Fitted Top Plate Options: \u003c\/p\u003e \u003cul\u003e \u003cli\u003eDrawer Location: \u003c\/li\u003e \u003cul\u003e \u003cli\u003eDriver Side \u003c\/li\u003e \u003cli\u003ePassenger Side OR Passenger Side with Factory Subwoofer\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eDrawer Color \u003cbr\u003e \u003c\/li\u003e \u003cul\u003e \u003cli\u003eBlack \u003c\/li\u003e \u003cli\u003eGray\u003c\/li\u003e \u003c\/ul\u003e \u003cul\u003e\u003c\/ul\u003e \u003c\/ul\u003e \u003cp\u003eUtilizing a 34\" drawer we gain storage that is easily accessible and leaves plenty of room on top for your personal gear.  Things like sleeping bags, pillows and food. Now with Fitted Top Plate you are gaining one extra storage locatable access hatch that can be used to store extra gear.\u003c\/p\u003e","brand":"Goose Gear","offers":[{"title":"Driver Side \/ Black \/ Include Shipping","offer_id":55887553724719,"sku":"3426-GGR-SH","price":2040.0,"currency_code":"USD","in_stock":true},{"title":"Driver Side \/ Gray \/ Include Shipping","offer_id":57195173019951,"sku":"3428-GGR-SH","price":2040.0,"currency_code":"USD","in_stock":true},{"title":"Passenger Side \/ Black \/ Include Shipping","offer_id":57195173052719,"sku":"3427-GGR-SH","price":2040.0,"currency_code":"USD","in_stock":true},{"title":"Passenger Side \/ Gray \/ Include Shipping","offer_id":57195173085487,"sku":"3429-GGR-SH","price":2040.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-2024-present-1st-gen-explore-series-single-drawer-drawer-module-wfitted-top-plate-241595_90cee92f-961a-4ba8-958d-ec20f0fe68e5.jpg?v=1777045677"},{"product_id":"ineos-grenadier-2024-present-1st-gen-explore-series-module-based-seat-delete","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Explore Series - Module Based Seat Delete","description":"\u003cp\u003eOur Ineos Grenadier module-based seat delete system not only provides much-needed storage but also features hatches with lockable compartments for secure storage. Constructed from premium Baltic birch and sprayed with our proprietary bed liner material, this system is engineered for durability and protection in the toughest conditions. For added rigidity and strength, we incorporate our MaxLite extrusion, ensuring a sturdy and reliable setup.\u003c\/p\u003e \u003cp\u003eThe module comes complete with all the necessary hardware for a hassle-free installation. Pair this with both the 60% and 40% modules and rear side-by-side drawers for the ultimate stealth sleeping system, providing ample secure storage while safeguarding your vehicle’s OEM battery and electronics. Each side comes with a pillow extension for added comfort for those over 6'2\" tall.\u003c\/p\u003e \u003cp\u003eUpgrade your Ineos Grenadier with lockable, rugged storage built to handle every adventure.\u003c\/p\u003e","brand":"Goose Gear","offers":[{"title":"60% Passenger Side Module","offer_id":55887863316783,"sku":"3439-GGR-SH","price":895.0,"currency_code":"USD","in_stock":true},{"title":"40% Driver Side Module","offer_id":57195140415791,"sku":"3440-GGR-SH","price":795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-2024-present-1st-gen-explore-series-module-based-seat-delete-975714_2fa76c43-7d5c-4864-8243-c532f57622b1.jpg?v=1777045615"},{"product_id":"ineos-grenadier-2024-present-second-row-seat-delete-plate-system","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Explore Series - Second Row Seat Delete Plate System","description":"\u003cp\u003eMaximize the functionality of your Ineos Grenadier with the \u003cb\u003eSecond Row Seat Delete Plate System™\u003c\/b\u003e, engineered to provide ample storage space and compatibility with Goose Gear Modules or your own custom storage system and accessories. This 100% second-row delete requires the removal of the seat, seat frame, and the surrounding plastic trim panels that house electrical components under the factory seat.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e \u003cb\u003eRear Plate Recommended, But Not Required\u003c\/b\u003e: Unlike other vehicles, the Ineos Grenadier does not require the rear plate for installation, although it is recommended for a seamless flat surface and additional support.\u003c\/li\u003e \u003cli\u003e \u003cb\u003eLarge Access Hatches\u003c\/b\u003e: Convenient hatches allow easy access to batteries and other electrical components without removing the delete plate.\u003c\/li\u003e \u003cli\u003e \u003cb\u003eNo Drilling or Cutting Needed\u003c\/b\u003e: This system installs without any modifications to your vehicle, ensuring easy and straightforward installation.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003eDimensions \u0026amp; Weight:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUsable space measures between \u003cb\u003e41-3\/4” (1055mm) to 54-1\/4” (1380mm) wide\u003c\/b\u003e and \u003cb\u003e31-3\/8” (795mm) long\u003c\/b\u003e.\u003c\/li\u003e \u003cli\u003eThe plate weighs approximately \u003cb\u003e44 pounds (20 kilograms)\u003c\/b\u003e, with a weight savings of \u003cb\u003e58 pounds (26 kilograms)\u003c\/b\u003e when replacing the factory rear seat, which weighs 124 pounds (56 kilograms).\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003eAdditional Features:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCreates a continuous, flat surface when paired with the Goose Gear Rear Plate System.\u003c\/li\u003e \u003cli\u003eCustom-sized hatches provide easy access to electrical components.\u003c\/li\u003e \u003cli\u003e \u003cb\u003eFuture Expansion\u003c\/b\u003e: Upcoming options include Venture Series Pop Top Interior system, ideal for roof conversions like Alu-Cab.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Goose Gear","offers":[{"title":"100% \/ Include Shipping","offer_id":55887869149487,"sku":"1424-GGR-SH","price":1495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/IMG_0901_35ca56b4-333f-4b8e-a348-9af010d8554e.jpg?v=1777045692"},{"product_id":"ineos-grenadier-2024-present-1st-gen-rear-plate-system","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Explore Series - Rear Plate System","description":"\u003cdiv class=\"nv-desc\"\u003e\n\u003ch2\u003eGoose Gear Rear Plate System — Ineos Grenadier (2024+)\u003c\/h2\u003e\n\u003cp\u003eThe foundation for a real Grenadier storage build. This Goose Gear Rear Plate System is built from industrial-grade plywood with a proprietary spray coating for durability, replaces the rear factory floor liner, and gives you a clean, flat load floor — with embedded anchor points to tie down gear or mount Goose Gear modules. No cutting or drilling.\u003c\/p\u003e\n\u003cdiv class=\"nv-h\"\u003eWhy it works\u003c\/div\u003e\n\u003cdiv class=\"nv-fcards\"\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eFlat, coated load floor\u003c\/b\u003eIndustrial plywood with a proprietary durable spray coating.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eNo cut, no drill\u003c\/b\u003eReplaces the factory liner using existing points.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eModule-ready\u003c\/b\u003eThe foundation for CampKitchen, IceBox, drawers, and fridge slides.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eEmbedded anchors\u003c\/b\u003eBuilt-in points for Goose Gear anchors to tie down gear.\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nv-callout\"\u003e\n\u003cb\u003eInstall note:\u003c\/b\u003e Requires removing the rear factory floor liner and anchor points, but needs \u003cb\u003eno cutting or drilling\u003c\/b\u003e of the vehicle. Includes extra-long hardware to optionally run the OEM utility rail on top of the plate.\u003c\/div\u003e\n\u003cdiv class=\"nv-h\"\u003eSpecifications\u003c\/div\u003e\n\u003ctable class=\"nv-spec\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRear plate system (Explore Series)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eIndustrial-grade plywood, proprietary spray coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUsable space\u003c\/td\u003e\n\u003ctd\u003e~41-5\/8″ W × 34-3\/4″ L (1058 × 885 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~22 lb (10 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall\u003c\/td\u003e\n\u003ctd\u003eNo cut\/drill; removes rear factory liner \u0026amp; anchors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eExtra-long hardware for optional OEM utility rail on top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorks with\u003c\/td\u003e\n\u003ctd\u003eGoose Gear modules, slotted \u0026amp; round anchors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003e2024+ Ineos Grenadier (1st gen)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"nv-h\"\u003eFrequently asked questions\u003c\/div\u003e\n\u003cdiv class=\"nv-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I need to cut or drill?\u003c\/summary\u003e\u003cp\u003eNo — it installs by removing the rear factory floor liner and anchor points, with no cutting or drilling of the vehicle.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow big is the usable surface?\u003c\/summary\u003e\u003cp\u003eAbout 41-5\/8 inches wide by 34-3\/4 inches long (1058 x 885 mm).\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat can I mount on it?\u003c\/summary\u003e\u003cp\u003eIt's the foundation for Goose Gear modules like the CampKitchen, IceBox, drawer modules, and fridge slides, plus slotted and round anchors for tying down gear.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow much does it weigh?\u003c\/summary\u003e\u003cp\u003eAbout 22 lb (10 kg).\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eAnything to watch out for?\u003c\/summary\u003e\u003cp\u003eIf you add drawers or a CampKitchen 2.2, you'll need to remove any door-mounted tables — they won't fit the Grenadier's short rear cargo area.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nv-xsell\"\u003e\n\u003cdiv class=\"nv-xh\"\u003eBuild the Grenadier\n\u003c\/div\u003e\n\u003cdiv class=\"nv-xrow\"\u003e\n\u003ca class=\"nv-xitem\" href=\"\/products\/ineos-grenadier-2024-present-1st-gen-explore-series-side-x-side-drawer-module-w-fitted-top-plate-41-3-8w-x-10h-x-34d\"\u003e\u003cb\u003eSide-by-Side Drawer Module\u003c\/b\u003eAdd lockable drawer storage\u003c\/a\u003e\u003ca class=\"nv-xitem\" href=\"\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003e\u003cb\u003eExterior Utility Belt\u003c\/b\u003eL-Track gear mounting outside\u003c\/a\u003e\u003ca class=\"nv-xitem\" href=\"\/collections\/goose-gear-ineos-grenadier-solutions\"\u003e\u003cb\u003eGoose Gear Grenadier\u003c\/b\u003eAll Grenadier storage\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Do I need to cut or drill?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No — it installs by removing the rear factory floor liner and anchor points, with no cutting or drilling of the vehicle.\"}}, {\"@type\": \"Question\", \"name\": \"How big is the usable surface?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"About 41-5\/8 inches wide by 34-3\/4 inches long (1058 x 885 mm).\"}}, {\"@type\": \"Question\", \"name\": \"What can I mount on it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It's the foundation for Goose Gear modules like the CampKitchen, IceBox, drawer modules, and fridge slides, plus slotted and round anchors for tying down gear.\"}}, {\"@type\": \"Question\", \"name\": \"How much does it weigh?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"About 22 lb (10 kg).\"}}, {\"@type\": \"Question\", \"name\": \"Anything to watch out for?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If you add drawers or a CampKitchen 2.2, you'll need to remove any door-mounted tables — they won't fit the Grenadier's short rear cargo area.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"Goose Gear","offers":[{"title":"Include Shipping","offer_id":57195177673007,"sku":"1423-GGR-SH","price":945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/IMG_0841.jpg?v=1777045689"},{"product_id":"ineos-grenadier-2024-present-1st-gen-explore-series-side-x-side-drawer-module-w-fitted-top-plate-41-3-8w-x-10h-x-34d","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Explore Series - Side X Side Drawer Module w\/Fitted Top Plate 41-3\/8\"w x 10\"h x 34\"d","description":"\u003cdiv class=\"nv-desc\"\u003e\n\u003ch2\u003eGoose Gear Explore Series Side-by-Side Drawer Module — Ineos Grenadier (2024+)\u003c\/h2\u003e\n\u003cp\u003eTurn the cargo area of your 2024+ Ineos Grenadier into a secure, organized storage system. This Explore Series side-by-side drawer module is built specifically for the Grenadier in a 10″ height, with a coated top plate that extends past the drawer sides to follow the interior contours — creating a flat surface wall-to-wall, seat-back to back door.\u003c\/p\u003e\n\u003cdiv class=\"nv-h\"\u003eWhy it works\u003c\/div\u003e\n\u003cdiv class=\"nv-fcards\"\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eGrenadier-specific fit\u003c\/b\u003eDesigned for the 2024+ Ineos Grenadier, 10″ height.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eThree split options\u003c\/b\u003e50\/50, 1\/3–2\/3, or 2\/3–1\/3 drawer configurations.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eCoated top plate\u003c\/b\u003eDurable surface with wings that follow the interior contours.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eAnchor-ready\u003c\/b\u003eMount fridge and cooler straps and other gear to the top plate.\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nv-callout\"\u003e\n\u003cb\u003eRequires the Ineos Grenadier Rear Plate System.\u003c\/b\u003e The drawer module mounts to the Rear Plate System (sold separately) — add it below if you don't already have one.\u003c\/div\u003e\n\u003cdiv class=\"nv-h\"\u003eSpecifications\u003c\/div\u003e\n\u003ctable class=\"nv-spec\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSide-by-side drawer module, Explore Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e10″ (10 in) only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e41-3\/8″W × 10″H × 34″D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSplit options\u003c\/td\u003e\n\u003ctd\u003e50\/50, 1\/3–2\/3, 2\/3–1\/3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop plate\u003c\/td\u003e\n\u003ctd\u003eCoated, wider than module with contour wings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEstimated weight\u003c\/td\u003e\n\u003ctd\u003e101.5 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRequires\u003c\/td\u003e\n\u003ctd\u003eIneos Grenadier Rear Plate System (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003e2024+ Ineos Grenadier (1st gen)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"nv-h\"\u003eFrequently asked questions\u003c\/div\u003e\n\u003cdiv class=\"nv-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it fit my Grenadier?\u003c\/summary\u003e\u003cp\u003eYes — it's designed specifically for the 2024+ Ineos Grenadier (1st generation), in a 10-inch height.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo I need anything else to install it?\u003c\/summary\u003e\u003cp\u003eYes — the module mounts to the Ineos Grenadier Rear Plate System, which is sold separately. Add it if you don't already have one.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat drawer splits are available?\u003c\/summary\u003e\u003cp\u003eThree: a 50\/50 split, a 1\/3-2\/3 split (smaller drawer on the left), and a 2\/3-1\/3 split (smaller drawer on the right).\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow much does it weigh?\u003c\/summary\u003e\u003cp\u003eThe estimated weight is 101.5 lb.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the top plate for?\u003c\/summary\u003e\u003cp\u003eIt's a coated, durable surface that runs wall-to-wall and gives you a place to anchor a fridge, cooler straps, and other gear.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nv-xsell\"\u003e\n\u003cdiv class=\"nv-xh\"\u003eComplete the Grenadier build\n\u003c\/div\u003e\n\u003cdiv class=\"nv-xrow\"\u003e\n\u003ca class=\"nv-xitem\" href=\"\/products\/ineos-grenadier-2024-present-1st-gen-rear-plate-system\"\u003e\u003cb\u003eRear Plate System\u003c\/b\u003eRequired base for this module\u003c\/a\u003e\u003ca class=\"nv-xitem\" href=\"\/collections\/goose-gear-ineos-grenadier-solutions\"\u003e\u003cb\u003eGoose Gear Grenadier\u003c\/b\u003eAll Grenadier storage solutions\u003c\/a\u003e\u003ca class=\"nv-xitem\" href=\"\/collections\/ineos-grenadier\"\u003e\u003cb\u003eAll Grenadier Gear\u003c\/b\u003eEverything for the Grenadier\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does it fit my Grenadier?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes — it's designed specifically for the 2024+ Ineos Grenadier (1st generation), in a 10-inch height.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need anything else to install it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes — the module mounts to the Ineos Grenadier Rear Plate System, which is sold separately. Add it if you don't already have one.\"}}, {\"@type\": \"Question\", \"name\": \"What drawer splits are available?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Three: a 50\/50 split, a 1\/3-2\/3 split (smaller drawer on the left), and a 2\/3-1\/3 split (smaller drawer on the right).\"}}, {\"@type\": \"Question\", \"name\": \"How much does it weigh?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The estimated weight is 101.5 lb.\"}}, {\"@type\": \"Question\", \"name\": \"What is the top plate for?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It's a coated, durable surface that runs wall-to-wall and gives you a place to anchor a fridge, cooler straps, and other gear.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"Goose Gear","offers":[{"title":"50\/50 Split \/ Black \/ Include Shipping","offer_id":55888075129135,"sku":"3420-GGR-SH","price":2790.0,"currency_code":"USD","in_stock":true},{"title":"50\/50 Split \/ Gray \/ Include Shipping","offer_id":57195174166831,"sku":"3421-GGR-SH","price":2790.0,"currency_code":"USD","in_stock":true},{"title":"1\/3 - 2\/3 Split \/ Black \/ Include Shipping","offer_id":57195174199599,"sku":"3422-GGR-SH","price":2790.0,"currency_code":"USD","in_stock":true},{"title":"1\/3 - 2\/3 Split \/ Gray \/ Include Shipping","offer_id":57195174232367,"sku":"3423-GGR-SH","price":2790.0,"currency_code":"USD","in_stock":true},{"title":"2\/3 - 1\/3 Split \/ Black \/ Include Shipping","offer_id":57195174265135,"sku":"3424-GGR-SH","price":2790.0,"currency_code":"USD","in_stock":true},{"title":"2\/3 - 1\/3 Split \/ Gray \/ Include Shipping","offer_id":57195174297903,"sku":"3425-GGR-SH","price":2790.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-2024-present-1st-gen-explore-series-side-x-side-drawer-module-wfitted-top-plate-41-38w-x-10h-x-34d-912731_39f22054-d59d-40d8-a349-6acbb9b1a8e1.jpg?v=1777045680"},{"product_id":"copy-of-jeep-wrangler-jk-jku-2007-2018-side-x-side-drawer-module-41-3-8-wide-x-28-depth","title":"Ineos - Grenadier - 2024-Present - 1st Gen - Explore Series - Side X Side Drawer Module - 41 3\/8\"W x 10\"H x 34\"D","description":"\u003cp\u003eThe Goose Gear Side x Side Drawer Modules are a great drawer solution for the rear of your vehicle. Providing ample drawer space while still having room above the drawer for everyday use or gear. \u003c\/p\u003e \u003cp\u003eSide x Side Drawer Module - 41 3\/8\" Wide x 10\" High x 34\" Deep is available in a variety of different drawer split, and colors: \u003c\/p\u003e \u003cul\u003e \u003cul\u003e\u003c\/ul\u003e \u003cli\u003eDrawer Split\u003c\/li\u003e \u003cul\u003e \u003cli\u003e50 - 50 Split (equal size drawers)\u003c\/li\u003e \u003cli\u003e1\/3 - 2\/3 Split (smaller diver side and larger passenger side) \u003c\/li\u003e \u003cli\u003e2\/3 - 1\/3 Split (larger driver side and smaller passenger side)\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eDrawer Color \u003c\/li\u003e \u003cul\u003e \u003cli\u003eBlack \u003c\/li\u003e \u003cli\u003eGray\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSide x Side Drawer Modules require a Goose Gear Rear Plate System for installation.\u003c\/strong\u003e The Goose Gear Rear Plate System is fitted to your specific vehicle, once installed the Side x Side Drawer bolts directly to the Rear Plate System.  All Side x Side Modules feature a LineX coated top plate for increased durability as well as a location to mount additional items such as anchors for fridge and cooler straps etc.\u003c\/p\u003e \u003cp\u003eEstimated weight: 98.5 lbs\u003c\/p\u003e","brand":"Goose Gear","offers":[{"title":"41 3\/8\"W x 10\"H x 34\"D \/ 1\/2 - 1\/2  |  Black \/ Include Shipping","offer_id":55888090988847,"sku":"3441-GGR-SH","price":2040.0,"currency_code":"USD","in_stock":true},{"title":"41 3\/8\"W x 10\"H x 34\"D \/ 1\/2 - 1\/2  |  Gray \/ Include Shipping","offer_id":55888091021615,"sku":"3442-GGR-SH","price":2040.0,"currency_code":"USD","in_stock":true},{"title":"41 3\/8\"W x 10\"H x 34\"D \/ 1\/3 - 2\/3  |  Black \/ Include Shipping","offer_id":55888091054383,"sku":"3443-GGR-SH","price":2040.0,"currency_code":"USD","in_stock":true},{"title":"41 3\/8\"W x 10\"H x 34\"D \/ 1\/3 - 2\/3  |  Gray \/ Include Shipping","offer_id":55888091087151,"sku":"3444-GGR-SH","price":2040.0,"currency_code":"USD","in_stock":true},{"title":"41 3\/8\"W x 10\"H x 34\"D \/ 2\/3 - 1\/3  |  Black \/ Include Shipping","offer_id":55888091119919,"sku":"3445-GGR-SH","price":2040.0,"currency_code":"USD","in_stock":true},{"title":"41 3\/8\"W x 10\"H x 34\"D \/ 2\/3 - 1\/3  |  Gray \/ Include Shipping","offer_id":55888091152687,"sku":"3446-GGR-SH","price":2040.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-2024-present-1st-gen-explore-series-side-x-side-drawer-module-41-38w-x-10h-x-34d-308922_0975665d-1fcf-4f7b-8c94-7fe6e04d31c9.jpg?v=1777045672"},{"product_id":"pedal-commander-throttle-response-controller-for-ineos-grenadier-2023","title":"Pedal Commander Throttle Response Controller for Ineos Grenadier (2023+)","description":"\u003ch2\u003ePedal Commander for Ineos Grenadier (2023+) | Throttle Response Controller\u003c\/h2\u003e\n\u003cp\u003eUpgrade your \u003cstrong\u003eIneos Grenadier\u003c\/strong\u003e with the \u003cstrong\u003ePedal Commander throttle response controller\u003c\/strong\u003e and get rid of the soft, delayed pedal feel common with modern drive-by-wire vehicles. This \u003cstrong\u003eplug-and-play throttle controller\u003c\/strong\u003e helps your accelerator react faster for daily driving, towing, off-road use, and more confident passing.\u003c\/p\u003e\n\u003cp\u003eBuilt for \u003cstrong\u003eIneos Grenadier (2023+)\u003c\/strong\u003e, Pedal Commander lets you fine-tune throttle sensitivity without tuning the ECU or making permanent changes. With \u003cstrong\u003efour drive modes\u003c\/strong\u003e, \u003cstrong\u003e36 total sensitivity settings\u003c\/strong\u003e, and quick installation, it is a simple upgrade for drivers who want sharper throttle response and better control.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEliminates throttle lag\u003c\/strong\u003e caused by factory drive-by-wire mapping\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlug-and-play installation\u003c\/strong\u003e with no cutting, splicing, or permanent modifications\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFour driving modes\u003c\/strong\u003e with customizable response for different road and trail conditions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e36 sensitivity levels\u003c\/strong\u003e to dial in the exact pedal feel you want\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact in-cab controller\u003c\/strong\u003e with optional app-based adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Pedal Commander?\u003c\/h3\u003e\n\u003cp\u003eThe Pedal Commander gives your \u003cstrong\u003eIneos Grenadier\u003c\/strong\u003e a faster, more connected throttle feel without claiming extra horsepower or requiring a tune. Whether you are commuting, towing, crawling off-road, or simply want cleaner acceleration from a stop, this controller helps you access the power your vehicle already has with more precision and confidence.\u003c\/p\u003e\n\u003ch3\u003ePerfect For\u003c\/h3\u003e\n\u003cp\u003eThis upgrade is ideal for drivers who want a \u003cstrong\u003ethrottle response controller for Ineos Grenadier\u003c\/strong\u003e, better low-speed control, quicker takeoffs, more confident merges, and a more responsive feel on pavement, dirt, sand, snow, or while towing and hauling.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEco Mode:\u003c\/strong\u003e Smooths throttle input for traction-minded driving and efficient cruising.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCity Mode:\u003c\/strong\u003e Delivers a more natural, responsive pedal feel for everyday driving in your \u003cstrong\u003eIneos Grenadier\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSport Mode:\u003c\/strong\u003e Sharpens throttle response so your \u003cstrong\u003eIneos Grenadier\u003c\/strong\u003e gets into the power sooner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSport+ Mode:\u003c\/strong\u003e Provides the quickest pedal response for the most aggressive driving feel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e Ineos Grenadier (2023+)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrottle Modes:\u003c\/strong\u003e Eco, City, Sport, and Sport+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity Adjustment:\u003c\/strong\u003e 36 total throttle response settings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Plug-and-play setup in 15 minutes with no wire cutting or permanent modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Options:\u003c\/strong\u003e Adjust settings from the in-cab controller or the mobile app\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-Theft Feature:\u003c\/strong\u003e Optional subscription-based pedal lockout from the mobile app\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eECU Safe:\u003c\/strong\u003e Does not reflash or interfere with the factory ECU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOBD II Friendly:\u003c\/strong\u003e Does not occupy the OBD II port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOwnership Confidence:\u003c\/strong\u003e Designed as a reversible upgrade that does not void your \u003cstrong\u003eIneos Grenadier\u003c\/strong\u003e warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pedal Commander","offers":[{"title":"Default Title","offer_id":55889924948271,"sku":"PC10","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/Main_Product_Ineos.webp?v=1775382482"},{"product_id":"ineos-grenadier-dtp-06-2s-male-to-2-way-dtp04-2p-u-unbalanced-female-splitter","title":"INEOS Grenadier: DTP-06-2S Male to 2-Way DTP04-2P-U Unbalanced Female Splitter","description":"\u003cp\u003eRun two accessories from a single rooftop power port on your INEOS Grenadier. This splitter plugs a DTP06-2S male connector straight into a factory EXT rooftop outlet and breaks it out into two independent DTP-04-2P female outputs on unequal legs — one short 15 cm tail and one long 100 cm tail. The uneven “unbalanced” leg lengths let you reach an accessory right at the port and a second one a meter away, such as lights positioned over the front and rear doors, without cutting or splicing a single factory wire.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne DTP06-2S male input; two DTP-04-2P female outputs on independent load paths\u003c\/li\u003e\n\u003cli\u003eUnbalanced leg design: one 15 cm leg and one 100 cm leg to reach accessories at different distances from the port\u003c\/li\u003e\n\u003cli\u003eSealed, locking Deutsch DTP connectors rated to IP65 for dust and water-spray resistance\u003c\/li\u003e\n\u003cli\u003ePlug-and-play install with no tools, no crimping, and no cutting — fully reversible\u003c\/li\u003e\n\u003cli\u003eKeeps OEM rooftop wiring completely intact so you preserve factory power connections\u003c\/li\u003e\n\u003cli\u003eFrees up a second accessory feed when your EXT ports are already allocated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2023–present), all trims, including Station Wagon and Quartermaster. It mates with the vehicle's factory rooftop DTP accessory outlets — DVA recommends installing on the EXT2 or EXT3 rooftop ports. It works with any accessory that terminates in a DTP-04-2P male connector, including DVA-style roof-mounted DTP lighting. Combined draw of both accessories must stay within the source EXT port's fuse rating.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connector\u003c\/td\u003e\n\u003ctd\u003eDTP06-2S male (Deutsch DTP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connectors\u003c\/td\u003e\n\u003ctd\u003e2× DTP-04-2P female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg lengths\u003c\/td\u003e\n\u003ctd\u003e15 cm and 100 cm (unbalanced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (weatherproof, locking connectors)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug \u0026amp; play, no tools, fully reversible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e227 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1× DTP splitter cable — DTP06-2S male to 2× DTP-04-2P female (one 15 cm leg, one 100 cm leg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich DTP splitter do I need — this unbalanced one or the balanced version?\u003c\/strong\u003e\u003cbr\u003e\nChoose this unbalanced splitter when your two accessories sit at different distances from the port — the short 15 cm and long 100 cm legs reach one device close and one farther away, like lights above the front and rear doors. If both accessories sit the same distance from the port, our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-rooftop-power-adapter-dtp06-2s-male-to-2-way-dtp04-2p-splitter\"\u003ebalanced DTP-06-2S to 2-Way DTP04-2P splitter\u003c\/a\u003e uses even-length legs instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to modify any factory wiring to install it?\u003c\/strong\u003e\u003cbr\u003e\nNo. It plugs into an existing rooftop DTP outlet and the accessories plug into it. There is no cutting, splicing, or crimping, and the whole thing unplugs to return the vehicle to stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan both outputs run at the same time?\u003c\/strong\u003e\u003cbr\u003e\nYes, both outputs are live simultaneously. The only limit is the source EXT port's fuse — keep the combined wattage of both accessories within that port's rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connector do my accessories need?\u003c\/strong\u003e\u003cbr\u003e\nEach output is a DTP-04-2P female, so your accessory needs a matching DTP-04-2P male plug. To convert an output to a sealed IP65 or Weather Pack accessory, see our other \u003ca href=\"https:\/\/nvmos.com\/collections\/ineos-grenadier\"\u003eGrenadier DTP power adapters\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it power two roof-mounted side lights?\u003c\/strong\u003e\u003cbr\u003e\nYes — a common use is feeding two DTP side lights from one port. It pairs naturally with our roof-bar-mount \u003ca href=\"https:\/\/nvmos.com\/products\/led-side-light-for-ineos-grenadier-roof-bar-mount-dtp-plug-in\"\u003eDTP plug-in side lights\u003c\/a\u003e.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024244093231,"sku":"I-PWR-2WS-U","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/1UnbalancedSplitterDSC00032-Edit.jpg?v=1774973830"},{"product_id":"ineos-grenadier-front-bumper-32-led-light-bar","title":"INEOS Grenadier: Front Bumper 32\" LED Light Bar","description":"\u003cp\u003eOur Front Bumper 32-inch LED Light Bar is a single-row, Osram-chip bar engineered specifically to sit inside the INEOS Grenadier's front bumper opening. It puts out 8,800 raw lumens from a combo spot-and-flood beam in an aluminum housing, delivering long-range reach with controlled spill for trail and highway use. This is the bar only — it bolts to our Front Bumper Light Mount for a centered, factory-clean install with no cutting or drilling.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e32\" (813 mm) single-row bar with Osram chips — engineered for the Grenadier, not adapted from a generic SKU\u003c\/li\u003e\n\u003cli\u003e8,800 raw lumens at 90W (12V, ~7.5A) with a combo spot + flood beam for both distance and foreground coverage\u003c\/li\u003e\n\u003cli\u003eIndividual reflector optics per LED for focused throw and controlled spill\u003c\/li\u003e\n\u003cli\u003eAluminum housing rated IP67 for all-weather durability\u003c\/li\u003e\n\u003cli\u003eWeatherproof, field-serviceable Deutsch DTP connector\u003c\/li\u003e\n\u003cli\u003eTrue bolt-on — wiring routes through existing chassis pathways with no cutting, drilling, or permanent modification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned for the INEOS Grenadier (2023–present). This is the light bar only and \u003cstrong\u003erequires the Front Bumper Light Mount\u003c\/strong\u003e (sold separately) to install. It wires to factory under-hood auxiliary power at EXT1 or EXT5, or to a centralized lighting controller.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRaw lumens\u003c\/td\u003e\n\u003ctd\u003e8,800 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower draw\u003c\/td\u003e\n\u003ctd\u003e90 W (12 V, ~7.5 A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e32\" \/ 813 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED configuration\u003c\/td\u003e\n\u003ctd\u003eSingle-row, Osram chip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam pattern\u003c\/td\u003e\n\u003ctd\u003eCombo (spot + flood)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptics\u003c\/td\u003e\n\u003ctd\u003eIndividual reflector per LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eDeutsch DTP (weatherproof, field-serviceable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003e~60 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e32\" single-row LED light bar\u003c\/li\u003e\n\u003cli\u003eWiring harness for factory EXT1\/EXT5 auxiliary connection\u003c\/li\u003e\n\u003cli\u003eWiring harness for aftermarket controller integration\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDo I need anything else to install this bar?\u003c\/strong\u003e\u003cbr\u003eYes. This is the bar only. It mounts to our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-bar-clean-factory-integrated-lighting-upgrade\"\u003eFront Bumper Light Mount\u003c\/a\u003e, which is sold separately. If you want both together, buy the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-kit-mount-32-led-light-bar\"\u003eMount + 32\" LED Bar kit\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of beam does it throw?\u003c\/strong\u003e\u003cbr\u003eIt uses a combo spot + flood pattern with individual reflector optics on each LED, giving you long-range throw down the trail plus controlled foreground spill from a single 32\" bar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it wired?\u003c\/strong\u003e\u003cbr\u003eTwo harnesses are included: one for factory under-hood auxiliary power at EXT1 or EXT5, and one for an aftermarket centralized controller. Wiring routes through existing chassis pathways and terminates in a field-serviceable Deutsch DTP connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it weatherproof?\u003c\/strong\u003e\u003cbr\u003eYes. The aluminum housing is rated IP67, and the Deutsch DTP connector is weatherproof and field-serviceable for reliable use in rain, dust, and snow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs an amber version available?\u003c\/strong\u003e\u003cbr\u003eYes — a yellow\/amber 32\" bar is offered as our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-32-led-light-bar-yellow\"\u003eFront Bumper 32\" LED Light Bar - Yellow\u003c\/a\u003e for better cut-through in fog and dust.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024251531567,"sku":"I-LP-32B","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/DSC00005_8a27165a-99f8-470c-939e-5d1bb6643079.jpg?v=1774973843"},{"product_id":"ineos-grenadier-front-bumper-2-light-set","title":"INEOS Grenadier: Front Bumper 2-Light Set","description":"\u003cp\u003eThe INEOS Grenadier Front Bumper 2-Light Set adds roughly 8,800 combined lumens of focused forward light to your Grenadier without the bulk of a full-width bar. Two compact Cree 4-chip pods bolt to the DVA front bumper mount and plug straight into the truck's factory power, giving you serious night and trail visibility while keeping the front end looking OEM. It is purpose-built for the Grenadier's bumper opening, so there are no universal brackets and no misalignment.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo Cree 4-chip LED pods, ~40W each, for ~80W and ~8,800 lumens of combined forward output\u003c\/li\u003e\n\u003cli\u003eIP68-rated housings sealed against water, dust, and pressure washing\u003c\/li\u003e\n\u003cli\u003ePlug-and-play DTP connector wiring — two harnesses included, one for a direct factory auxiliary connection and one for an aftermarket lighting controller\u003c\/li\u003e\n\u003cli\u003eCompact twin-pod layout delivers concentrated throw without the visual mass of a full light bar\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for the Grenadier's bumper opening and the DVA bumper light mount for a centered, factory-clean face\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2023–present). This is the light set only — it requires the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-bar-clean-factory-integrated-lighting-upgrade\"\u003eGrenadier Front Bumper Light Mount\u003c\/a\u003e, sold separately, to install. If you would rather buy both together, we also offer the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-kit-mount-2-light-led-bar\"\u003ecomplete Mount + 2-Light kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight count\u003c\/td\u003e\n\u003ctd\u003e2-pod LED set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED type\u003c\/td\u003e\n\u003ctd\u003eCree 4-chip units\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower per light\u003c\/td\u003e\n\u003ctd\u003e~40W (4 chips x 10W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal system power\u003c\/td\u003e\n\u003ctd\u003e~80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCombined output\u003c\/td\u003e\n\u003ctd\u003e~8,800 lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeather rating\u003c\/td\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eDTP plug-in (wiring included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRequired mount\u003c\/td\u003e\n\u003ctd\u003eDVA Front Bumper Light Mount (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eINEOS Grenadier (2023–present)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2-light Cree LED bumper bar assembly\u003c\/li\u003e\n\u003cli\u003eLighting-controller connection harness\u003c\/li\u003e\n\u003cli\u003eDirect factory auxiliary power harness\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need anything else to install this light set?\u003c\/strong\u003e\u003cbr\u003e\nYes. This is the 2-light set only. It mounts to the DVA Front Bumper Light Mount, which is sold separately. If you do not already own the mount, order it alongside this set or buy the complete Mount + 2-Light kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow bright is the 2-light set?\u003c\/strong\u003e\u003cbr\u003e\nEach Cree 4-chip pod draws about 40W, for roughly 80W and about 8,800 combined lumens of controlled forward illumination — enough for confident night driving, trail use, and poor-weather visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I have to cut or drill my bumper?\u003c\/strong\u003e\u003cbr\u003e\nNo. The set plugs into the vehicle with an included DTP harness and bolts to the DVA mount, which uses factory mounting points. No cutting, drilling, or splicing is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I run these with an aftermarket light controller?\u003c\/strong\u003e\u003cbr\u003e\nYes. Two harnesses are included — one for a direct factory auxiliary connection and one for integration with a centralized aftermarket lighting controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it weatherproof enough for overlanding?\u003c\/strong\u003e\u003cbr\u003e\nThe pods carry an IP68 rating, sealing them against dust, submersion, and high-pressure water, so they hold up to trail, weather, and wash-down use.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024253301039,"sku":"I-LP-2B","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/DSC00210-HDRLarge_2d2a279e-d65f-4ec8-9429-e07239f83f86.jpg?v=1774973847"},{"product_id":"under-seat-fire-extinguisher-mount-for-ineos-grenadier-passenger-side","title":"INEOS Grenadier: Under-Seat Fire Extinguisher Mount","description":"\u003cp\u003eKeep a fire extinguisher within arm's reach and completely out of the way with this under-seat mount built specifically for the INEOS Grenadier's passenger seat. It anchors to the factory under-seat bolts, so there's no drilling or cutting, and a quick-release lever puts the bottle in your hand with one motion when seconds matter. Precision-machined aluminum keeps it light and corrosion-resistant for a lifetime of trail and daily use.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision-engineered aluminum bracket with a corrosion-resistant black coating\u003c\/li\u003e\n\u003cli\u003eNo-drill installation using the Grenadier's existing passenger-side under-seat bolts\u003c\/li\u003e\n\u003cli\u003eQuick-release lever with a red anodized knob for fast, one-handed deployment\u003c\/li\u003e\n\u003cli\u003eAdjustable cradle holds most compact fire extinguishers securely\u003c\/li\u003e\n\u003cli\u003eLow-profile design tucks under the seat without stealing legroom or blocking seat adjustment\u003c\/li\u003e\n\u003cli\u003eLight at roughly 2 lbs (907 g), so it adds security without adding bulk\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned for the INEOS Grenadier and mounts on the passenger side using factory under-seat hardware. Compatible with both left-hand-drive and right-hand-drive Grenadiers. The fire extinguisher itself is sold separately.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePrecision-engineered aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCorrosion-resistant black coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApproximately 2 lbs (907 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting location\u003c\/td\u003e\n\u003ctd\u003eUnder passenger seat, factory bolt points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo-drill, bolt-on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelease\u003c\/td\u003e\n\u003ctd\u003eQuick-release lever, red anodized knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive compatibility\u003c\/td\u003e\n\u003ctd\u003eLHD and RHD Grenadier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x under-seat fire extinguisher bracket\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes installing this require drilling into my Grenadier?\u003c\/strong\u003e\u003cbr\u003e\nNo. The bracket uses the existing under-seat bolts on the passenger side, so there is no drilling, cutting, or permanent modification to your interior.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a fire extinguisher included?\u003c\/strong\u003e\u003cbr\u003e\nNo, the extinguisher is sold separately. The adjustable cradle is sized to hold most compact automotive fire extinguishers securely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit a right-hand-drive Grenadier?\u003c\/strong\u003e\u003cbr\u003e\nYes. The mount is compatible with both LHD and RHD Grenadiers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it get in the way of the passenger seat or legroom?\u003c\/strong\u003e\u003cbr\u003e\nNo. The low-profile design tucks the extinguisher under the seat so it does not interfere with legroom, floor mats, or seat adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow fast can I get to the extinguisher in an emergency?\u003c\/strong\u003e\u003cbr\u003e\nThe quick-release lever with its red anodized knob is built for one-handed access, letting you pull the bottle free in a single motion.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024256217391,"sku":"I-MT-FE","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/under-seat-fire-extinguisher-mount-for-ineos-grenadier-1246192.jpg?v=1774973853"},{"product_id":"ineos-grenadier-front-bumper-3-light-bar","title":"INEOS Grenadier: Front Bumper 3-Light Bar","description":"\u003cp\u003eOur Front Bumper 3-Light Bar adds serious forward output to the INEOS Grenadier without a universal-bracket look. Three Cree 4-chip pods deliver roughly 13,200 lumens at about 110W, purpose-built to sit centered in the factory bumper opening. This is the light bar only — it bolts directly to our Front Bumper Light Mount for a clean, factory-grade install with no cutting and no drilling.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThree Cree 4-chip LED pods rated 40W each — ~110W total and ~13,200 combined lumens\u003c\/li\u003e\n\u003cli\u003eFactory-clean integration: designed for the Grenadier and the DVA bumper mount, so there are no universal brackets or misalignment\u003c\/li\u003e\n\u003cli\u003eIP68 weather rating for confident use in rain, dust, and snow\u003c\/li\u003e\n\u003cli\u003eDTP plug-in wiring included, with two options: centralized lighting controller or direct factory under-hood auxiliary power\u003c\/li\u003e\n\u003cli\u003eTrue bolt-on — no cutting, no drilling\u003c\/li\u003e\n\u003cli\u003eApproximately 9 lb (4.08 kg) bar assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned for the INEOS Grenadier (2023–present). This is the 3-light bar only and \u003cstrong\u003erequires the Front Bumper Light Mount\u003c\/strong\u003e (sold separately), available in U.S. and Euro bumper variants. Prefer a single continuous bar instead of three pods? See our 32\" single-row option.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCombined output\u003c\/td\u003e\n\u003ctd\u003e~13,200 lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal system power\u003c\/td\u003e\n\u003ctd\u003e~110 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e3 × Cree 4-chip pods, 40W each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eDeutsch DTP plug-in (wiring included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~9 lb (approx. 4.08 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount\u003c\/td\u003e\n\u003ctd\u003eRequires Front Bumper Light Mount (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3-light LED bumper bar assembly\u003c\/li\u003e\n\u003cli\u003eWiring harness for centralized lighting controller connection\u003c\/li\u003e\n\u003cli\u003eWiring harness for direct factory under-hood auxiliary power\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes this include the bumper mount?\u003c\/strong\u003e\u003cbr\u003eNo. This is the 3-light bar only. It bolts to our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-bar-clean-factory-integrated-lighting-upgrade\"\u003eFront Bumper Light Mount\u003c\/a\u003e, sold separately. To get both together, buy the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-kit-mount-3-light-led-bar\"\u003eMount + 3-Light LED Bar kit\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much light does it put out?\u003c\/strong\u003e\u003cbr\u003eThree Cree 4-chip pods at 40W each produce about 110W of draw and roughly 13,200 combined lumens — our brightest bumper bar for night driving, trail use, and poor-weather visibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it wire up?\u003c\/strong\u003e\u003cbr\u003eWiring is included with a DTP plug-in. You can run it through a centralized lighting controller or connect directly to factory under-hood auxiliary power without a controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I add amber covers?\u003c\/strong\u003e\u003cbr\u003eYes. Our \u003ca href=\"https:\/\/nvmos.com\/products\/amber-yellow-snap-on-light-covers-ineos-grenadier-3-light-bumper-bar-set-of-3\"\u003eamber\/yellow snap-on covers (set of 3)\u003c\/a\u003e are molded for this exact bar and reduce glare in fog, dust, and snow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it different from the 32\" bar?\u003c\/strong\u003e\u003cbr\u003eThis three-pod bar produces ~13,200 lumens at ~110W, while the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-32-led-light-bar\"\u003e32\" single-row bar\u003c\/a\u003e puts out 8,800 lumens at 90W with a lower-profile continuous face. Both use the same bumper mount.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024270209327,"sku":"I-LP-3B","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-front-bumper-light-kit-mount-3-light-led-bar-3414010_d5b802f6-cdaf-4040-abc5-84635e23189b.jpg?v=1774973878"},{"product_id":"ineos-grenadier-front-bumper-light-bar-clean-factory-integrated-lighting-upgrade","title":"INEOS Grenadier: Front Bumper Light Mount","description":"\u003cp\u003eThe INEOS Grenadier Front Bumper Light Mount positions a straight LED light bar dead-center inside the factory bumper opening, so your Grenadier looks stock during the day and throws serious light after dark. Machined from high-grade steel and finished in textured black powder coat, it bolts to existing factory mounting points — no cutting, no drilling, no trimming of the bumper, grille, or plastics. Because it sits inside the opening rather than hanging off the front, it preserves radiator airflow, the factory crash bar, and your full approach angle.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-grade steel bracket system finished in textured black powder coat\u003c\/li\u003e\n\u003cli\u003e100% bolt-on install using existing factory mounting points — zero cutting or drilling\u003c\/li\u003e\n\u003cli\u003eMounts a straight LED bar inside the bumper opening for a hidden-hardware, factory-clean look\u003c\/li\u003e\n\u003cli\u003ePreserves full radiator airflow, factory crash bar integrity, approach angle, and ground clearance\u003c\/li\u003e\n\u003cli\u003eRetains OEM fog light locations and function\u003c\/li\u003e\n\u003cli\u003eBroad light compatibility — works with DVA, Rigid, Baja Designs, Diode Dynamics, and most straight LED bars\u003c\/li\u003e\n\u003cli\u003eOffered in U.S.\/Global and Euro fitments to match your bumper's opening and sensor layout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2023–present). Choose the U.S.\/Global variant for bumpers with integrated amber marker lights and the wider center opening, or the Euro variant for the narrower center slot and different parking-sensor layout. Note: this mount is \u003cstrong\u003enot\u003c\/strong\u003e compatible with the Euro bumper that has an integrated winch. Designed for straight LED light bars; curved bars may not seat correctly. This listing is the mount only — the LED bar is not included.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eTextured black powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall method\u003c\/td\u003e\n\u003ctd\u003e100% bolt-on, factory mounting points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003e45–60 minutes with basic hand tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModifications\u003c\/td\u003e\n\u003ctd\u003eNone — no cutting, drilling, or trimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment variants\u003c\/td\u003e\n\u003ctd\u003eU.S.\/Global and Euro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWinch compatibility\u003c\/td\u003e\n\u003ctd\u003eWorks with or without a winch (not for Euro bumper with integrated winch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow \/ approach angle\u003c\/td\u003e\n\u003ctd\u003eNo impact — full radiator airflow and approach angle retained\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eINEOS Grenadier (2023–present)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront bumper light bar mount (bracket system)\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill I have to cut or drill my bumper?\u003c\/strong\u003e\u003cbr\u003e\nNo. The mount uses the Grenadier's existing factory mounting points for a true bolt-on install. No cutting, drilling, or trimming of the bumper, grille, or plastics is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich fitment do I need — U.S.\/Global or Euro?\u003c\/strong\u003e\u003cbr\u003e\nMatch it to your bumper. The U.S.\/Global version fits bumpers with amber marker lights and a wider center opening; the Euro version fits the narrower center slot and different parking-sensor layout. The mount is not compatible with the Euro bumper that includes an integrated winch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it affect radiator airflow or approach angle?\u003c\/strong\u003e\u003cbr\u003e\nNo. The bar sits inside the factory bumper opening, so radiator airflow, the factory crash bar, approach angle, and ground clearance are all preserved.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat light bars will fit this mount?\u003c\/strong\u003e\u003cbr\u003e\nIt is built for straight LED light bars and is compatible with popular brands including DVA, Rigid, Baja Designs, and Diode Dynamics. Curved bars are not recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a light bar included?\u003c\/strong\u003e\u003cbr\u003e\nNo. This listing is for the mounting system only. Pair it with our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-32-led-light-bar\"\u003e32\" LED light bar\u003c\/a\u003e, \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-2-light-set\"\u003e2-light set\u003c\/a\u003e, or \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-3-light-bar\"\u003e3-light bar\u003c\/a\u003e to complete the system.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"U.S. Fit","offer_id":56024276173103,"sku":"I-LB-FB-U","price":399.0,"currency_code":"USD","in_stock":true},{"title":"Euro Fit","offer_id":56024276205871,"sku":"I-LB-FB-E","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-front-bumper-light-mount-clean-factory-integrated-lighting-mount-8999051_e9ac86c3-9c78-4402-813d-5609c53bcb6f.jpg?v=1774973888"},{"product_id":"ineos-grenadier-2-trailer-rear-hitch","title":"INEOS Grenadier: Rear 2\" Hitch Receiver – Heavy-Duty Towing Upgrade","description":"\u003cp\u003eAdd a true 2-inch receiver to the back of your INEOS Grenadier without spoiling its factory lines. This bolt-on hitch mounts to the existing frame and bumper points, so it slots in behind the rear bumper with an OEM-clean look while opening the door to trailers, bike racks, cargo carriers, and recovery gear. High-grade welded steel and a textured black powder coat make it as tough as the truck it bolts to.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStandard 2\" x 2\" receiver accepts the full universe of hitch-mounted accessories\u003c\/li\u003e\n\u003cli\u003eHigh-grade steel with a high-strength welded design for real-world towing and utility loads\u003c\/li\u003e\n\u003cli\u003eTextured black powder-coat finish resists corrosion and scratches and matches the Grenadier's rugged look\u003c\/li\u003e\n\u003cli\u003eBolts to existing factory frame and bumper mounts with no cutting or drilling\u003c\/li\u003e\n\u003cli\u003eEngineered to retain full departure angle and ground clearance\u003c\/li\u003e\n\u003cli\u003eInstalls in under an hour with basic hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2024-current). The receiver bolts to factory frame and bumper mounting points. For trailer lighting and brakes, you'll need the factory towing harness or an INEOS OEM\/aftermarket wiring harness, which is not included with the receiver.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReceiver size\u003c\/td\u003e\n\u003ctd\u003e2\" x 2\" standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-grade steel, high-strength welded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eTextured black powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-on, no cutting or drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003eUnder 1 hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTools required\u003c\/td\u003e\n\u003ctd\u003e14mm hex key and basic hand tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClearance\u003c\/td\u003e\n\u003ctd\u003eRetains factory departure angle and ground clearance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x rear 2\" hitch receiver in textured black powder coat\u003c\/li\u003e\n\u003cli\u003eMounting hardware kit\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size accessories does this receiver take?\u003c\/strong\u003e\u003cbr\u003e\nIt's a standard 2\" x 2\" receiver, so it accepts common 2-inch hitch accessories such as ball mounts, bike racks, cargo carriers, and recovery hitches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I have to drill or cut anything to install it?\u003c\/strong\u003e\u003cbr\u003e\nNo. The receiver bolts directly to existing factory frame and bumper mounts, so there is no cutting, drilling, or permanent modification. Most owners complete the job in under an hour with basic hand tools and a 14mm hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it change my departure angle or ground clearance?\u003c\/strong\u003e\u003cbr\u003e\nNo. The hitch is designed to tuck in behind the factory bumper and retain full departure angle and clearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do I need to wire up trailer lights and brakes?\u003c\/strong\u003e\u003cbr\u003e\nThe receiver is the mechanical hitch only. You'll need the factory towing harness or an INEOS OEM\/aftermarket wiring harness to power trailer lighting and brakes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich model years does it fit?\u003c\/strong\u003e\u003cbr\u003e\nIt is built for the INEOS Grenadier from the 2024 model year through current production.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024278303023,"sku":"I-E-TH","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-rear-2-hitch-receiver-heavy-duty-towing-upgrade-6304004.jpg?v=1774973893"},{"product_id":"exterior-utility-belt-front-set-for-ineos-grenadier","title":"INEOS Grenadier: Exterior Utility Belt - Front Section-Only","description":"\u003cp\u003eThe Exterior Utility Belt Front Section retrofits your INEOS Grenadier's four door belt lines with L-Track mounting rails, turning the flanks of the Station Wagon into a body-mounted gear platform. Built from 6061 aluminum with a dual anodized-and-powder-coated finish, it outlasts the factory anodize-only Armor Utility Belt and bolts on to existing door points with no drilling. This section covers the doors only — it is the ideal starting kit for owners whose Grenadier never came with the factory option.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e6061 aluminum construction with a dual-layer finish: hard anodize under powder coat for chip, scratch, and UV resistance well beyond the factory single-layer spec\u003c\/li\u003e\n\u003cli\u003eCovers all four door belt lines — front driver, front passenger, rear driver, and rear passenger doors\u003c\/li\u003e\n\u003cli\u003eNative L-Track channel accepts standard L-Track accessories: MOLLE panels, jerry can mounts, recovery board carriers, light mounts, and tie-down anchors\u003c\/li\u003e\n\u003cli\u003eTrue bolt-on install to existing Grenadier door mounting points — no drilling, fully reversible to stock\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware included\u003c\/li\u003e\n\u003cli\u003eDoes not include the two rear trunk panels below the rear windows — step up to the \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eFull Set\u003c\/a\u003e for complete six-position coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier Station Wagon (2023–present), all trims, using OEM-equivalent dimensions for a direct retrofit. Best suited to vehicles that did not come with the factory Armor Utility Belt. Accessories attach via the universal L-Track standard, so anything L-Track compatible will mount. For rear-door-only coverage see our \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-rear-only-set-for-ineos-grenadier\"\u003eRear Section\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061 aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodized + powder-coated (dual layer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePositions covered\u003c\/td\u003e\n\u003ctd\u003e4 door belt lines (both fronts, both rears)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eBolt-on to factory points, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003eApproximately 60–90 minutes with hand tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eStainless steel, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccessory standard\u003c\/td\u003e\n\u003ctd\u003eL-Track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReversible\u003c\/td\u003e\n\u003ctd\u003eYes — returns to stock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4 door utility belt panels (front driver, front passenger, rear driver, rear passenger)\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Front Section and the Full Set?\u003c\/strong\u003e\u003cbr\u003e\nThe Front Section covers the four door belt lines. The \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eFull Set\u003c\/a\u003e adds the two rear trunk panels below the rear windows for full six-position coverage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this kit include the rear trunk panels?\u003c\/strong\u003e\u003cbr\u003e\nNo. The Front Section is doors only. The trunk panels come with the Full Set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I mount to it?\u003c\/strong\u003e\u003cbr\u003e\nAny standard L-Track accessory — MOLLE panels, jerry can carriers, recovery board mounts, auxiliary lights, and tie-down anchors. Our \u003ca href=\"https:\/\/nvmos.com\/products\/l-track-slider-for-dualtrack-roof-rails-ineos-grenadier-utility-belt\"\u003eL-Track sliders\u003c\/a\u003e give you adjustable bolt-down points anywhere along the rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I have to drill into my Grenadier?\u003c\/strong\u003e\u003cbr\u003e\nNo. It bolts to existing factory door mounting points and is fully reversible to stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it better than the factory belt?\u003c\/strong\u003e\u003cbr\u003e\nSame dimensions and bolt-on fit, but a dual anodize-plus-powder-coat finish resists stone chips, brush contact, and UV far better than the factory anodize-only panels.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024280072495,"sku":"I-UB-FS","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/exterior-utility-belt-full-set-for-ineos-grenadier-2235561_eb53e142-06a9-4076-a332-d87a657644a5.jpg?v=1774973896"},{"product_id":"led-side-flood-light-ineos-grenadier-roof-bar-dtp-plug-in","title":"INEOS Grenadier: LED Side Flood Light – Roof Bar Mount \u0026 DTP Plug-In","description":"\u003cp\u003eThe INEOS Grenadier LED Side Flood Light throws 2,400 lumens of broad, even flood coverage per unit — ideal for lighting up camp, a recovery scene, or a work zone right beside the truck. It clamps to the factory roof bar and arrives pre-fitted with a DTP connector, so it plugs straight into the Grenadier's EXT3 rooftop power port. No wiring runs, no relays, no drilling, and no modifications to the vehicle.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2,400 lumens of wide flood output per unit for broad, even area coverage close to the vehicle\u003c\/li\u003e\n\u003cli\u003ePre-fitted Deutsch DTP connector plugs directly into the factory EXT3 rooftop power port\u003c\/li\u003e\n\u003cli\u003ePrecision roof-bar clamp mounts to the Grenadier's factory roof bar with no drilling\u003c\/li\u003e\n\u003cli\u003eIP68-rated aluminum housing with cooling fins for sustained output and all-weather use\u003c\/li\u003e\n\u003cli\u003eIncludes a snap-on yellow lens to cut glare and backscatter in fog, dust, and snow\u003c\/li\u003e\n\u003cli\u003eAvailable as a 1-pack or 2-pack to light one or both sides of the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2023–present, all trims) with the factory roof bar. It draws power from the EXT3 rooftop port, which offers access points above the left front door, left rear door, and right rear door — the most practical port for roof-bar accessories on either side of the vehicle. Choose the flood version for area lighting; if you want directional throw at range, see our \u003ca href=\"https:\/\/nvmos.com\/products\/led-side-light-for-ineos-grenadier-roof-bar-mount-dtp-plug-in\"\u003eLED Side Light\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput per unit\u003c\/td\u003e\n\u003ctd\u003e2,400 lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam pattern\u003c\/td\u003e\n\u003ctd\u003eWide flood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eDeutsch DTP (pre-installed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower port\u003c\/td\u003e\n\u003ctd\u003eFactory EXT3 rooftop port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount\u003c\/td\u003e\n\u003ctd\u003eFactory roof-bar clamp (no drilling)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eAluminum with cooling fins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeather rating\u003c\/td\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens\u003c\/td\u003e\n\u003ctd\u003eSnap-on yellow lens included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit options\u003c\/td\u003e\n\u003ctd\u003e1-pack or 2-pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eINEOS Grenadier (2023–present)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLED side flood light unit(s) with pre-fitted DTP connector\u003c\/li\u003e\n\u003cli\u003eSnap-on yellow lens per light\u003c\/li\u003e\n\u003cli\u003eFactory roof-bar clamp and bracket\u003c\/li\u003e\n\u003cli\u003eStainless mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Side Flood Light and the Side Light?\u003c\/strong\u003e\u003cbr\u003e\nThis flood light casts a wide, even beam for broad coverage close to the truck — best for camp setup, recovery operations, and work zones. The LED Side Light uses a more focused beam optimized for directional trail illumination and visibility at range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to wire anything or add a switch?\u003c\/strong\u003e\u003cbr\u003e\nNo. Each light is pre-fitted with a DTP connector that plugs directly into the Grenadier's factory EXT3 rooftop port. There are no wiring runs, relays, or switches to install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes mounting require drilling?\u003c\/strong\u003e\u003cbr\u003e\nNo. The precision clamp attaches to the factory roof bar with no drilling or modification to the vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I run the yellow lens for fog and dust?\u003c\/strong\u003e\u003cbr\u003e\nYes. A snap-on yellow lens is included with each light. It reduces glare and backscatter in fog, dust, and snow and swaps on and off without tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I light both sides of the truck?\u003c\/strong\u003e\u003cbr\u003e\nYes. Order the 2-pack to mount a flood light on each side of the roof bar for wide, symmetrical area coverage.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"1-Pack","offer_id":56024281973039,"sku":"I-LB-1F","price":139.0,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":56024282005807,"sku":"I-LB-1F-2","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/led-side-flood-light-for-ineos-grenadier-roof-bar-mount-dtp-plug-in-6222111.jpg?v=1774973899"},{"product_id":"led-side-light-for-ineos-grenadier-roof-bar-mount-dtp-plug-in","title":"INEOS Grenadier: LED Side Light – Roof Bar Mount \u0026 DTP Plug-In","description":"\u003cp\u003eThe INEOS Grenadier LED Side Light gives you focused, roof-mounted trail illumination that installs in minutes. Each light is a 30W aluminum unit that clamps to the factory roof bar and comes pre-fitted with a Deutsch DTP connector — plug it into the Grenadier's EXT3 rooftop power port, tighten the clamp, and drive. No new wiring, no relay, no switch, and no drilling: it runs on factory power through the factory connector.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e30W-per-light output with a directional beam tuned for trail visibility at range\u003c\/li\u003e\n\u003cli\u003ePre-installed Deutsch DTP connector plugs straight into the factory EXT3 rooftop port\u003c\/li\u003e\n\u003cli\u003ePrecision-machined clamp mounts to the Grenadier's factory roof bar — no drilling or modification\u003c\/li\u003e\n\u003cli\u003eIP68-rated aluminum housing with cooling fins for durable, all-weather performance\u003c\/li\u003e\n\u003cli\u003eTwo output modes: white LED for wide-beam trail light, plus an included snap-on yellow lens for fog, dust, snow, and reduced glare\u003c\/li\u003e\n\u003cli\u003eAvailable as a Single Light Kit or Dual Light Kit (dual kit adds a DTP splitter to run both from one port)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2023–present, all trims) with the factory roof bar. It powers from the EXT3 rooftop port, which has three access points — above the left front door, left rear door, and right rear door — making it the most practical port for roof-bar accessories on either side of the truck. Prefer broad area coverage over throw? Consider our \u003ca href=\"https:\/\/nvmos.com\/products\/led-side-flood-light-ineos-grenadier-roof-bar-dtp-plug-in\"\u003eLED Side Flood Light\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower per light\u003c\/td\u003e\n\u003ctd\u003e30W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam\u003c\/td\u003e\n\u003ctd\u003eWhite LED, wide-beam directional throw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eDeutsch DTP (pre-installed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower port\u003c\/td\u003e\n\u003ctd\u003eFactory EXT3 rooftop port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount\u003c\/td\u003e\n\u003ctd\u003ePrecision roof-bar clamp (no drilling)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eAluminum with cooling fins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeather rating\u003c\/td\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens\u003c\/td\u003e\n\u003ctd\u003eSnap-on yellow lens included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit options\u003c\/td\u003e\n\u003ctd\u003eSingle Light Kit or Dual Light Kit (dual adds DTP splitter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eINEOS Grenadier (2023–present)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLED side light unit(s) with pre-fitted DTP connector\u003c\/li\u003e\n\u003cli\u003eSnap-on yellow lens per light\u003c\/li\u003e\n\u003cli\u003eRoof-bar clamp and bracket\u003c\/li\u003e\n\u003cli\u003eStainless hardware and hex keys\u003c\/li\u003e\n\u003cli\u003eDTP splitter (Dual Light Kit only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow does this install without wiring?\u003c\/strong\u003e\u003cbr\u003e\nEach light comes pre-fitted with a Deutsch DTP connector that plugs directly into the Grenadier's factory EXT3 rooftop power port. There is no new wiring, relay, or switch to add — it uses factory power and the factory connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to drill the roof bar?\u003c\/strong\u003e\u003cbr\u003e\nNo. The precision-machined clamp attaches to the factory roof bar with no drilling or modifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the yellow lens do?\u003c\/strong\u003e\u003cbr\u003e\nThe included snap-on yellow lens filters the white LED for fog, dust, snow, and reduced glare. It swaps on and off by hand with no tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I run two lights from a single port?\u003c\/strong\u003e\u003cbr\u003e\nYes. The Dual Light Kit includes a DTP splitter so both lights operate from one EXT3 rooftop port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSide Light or Side Flood Light — which should I pick?\u003c\/strong\u003e\u003cbr\u003e\nChoose this Side Light for focused, directional trail illumination optimized for range. Choose the Side Flood Light if you want broad, even coverage for camp, work, and recovery close to the vehicle.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Single Light Kit","offer_id":56024284365103,"sku":"I-LP-1P","price":139.0,"currency_code":"USD","in_stock":true},{"title":"Dual Light Kit","offer_id":56024284397871,"sku":"I-LP-2P","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/DSC00038-HDR.jpg?v=1774973904"},{"product_id":"awning-mount-for-dualtrack-roof-rails","title":"INEOS Grenadier: Awning Mount V2 for DualTrack Roof Rails (Set of 2)","description":"\u003cp\u003eMount a rooftop awning to your INEOS Grenadier without stacking up adapters and spacers. This set of two brackets drops straight into the channels of our \u003ca href=\"https:\/\/nvmos.com\/products\/dualtrack-roof-rail-ineos-grenadier\"\u003eDualTrack roof rail system\u003c\/a\u003e, giving your awning a direct, rock-solid anchor that adds only about 3 inches of clearance for a clean, low-profile stance. The latest version is built from stainless steel for serious strength against wind load and off-road vibration.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStainless-steel construction (current V2) for high strength and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eDirect-fit into the DualTrack roof rail channels using the included hardware\u003c\/li\u003e\n\u003cli\u003eFits most roof-mounted awnings, from 270-degree wrap-around units to classic straight pull-out designs\u003c\/li\u003e\n\u003cli\u003eAdds just about 3 inches of clearance for a low-profile, factory-clean look\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no drilling or modification\u003c\/li\u003e\n\u003cli\u003eEngineered to hold steady through heavy wind loads and rugged terrain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eBuilt specifically for the INEOS Grenadier running the DualTrack roof rail system. The brackets seat into the DualTrack channel, so they require our DualTrack rails (sold separately) rather than mounting to a bare roof. On the awning side, the set is compatible with most leading roof-mounted awning brands in both 270-degree wrap-around and straight-pull configurations.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless steel (current V2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eSet of 2 brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting standard\u003c\/td\u003e\n\u003ctd\u003eDualTrack roof rail channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdded clearance\u003c\/td\u003e\n\u003ctd\u003eApproximately 3 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAwning compatibility\u003c\/td\u003e\n\u003ctd\u003e270-degree wrap-around and straight-pull designs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-on, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x DualTrack awning mount brackets\u003c\/li\u003e\n\u003cli\u003eMounting hardware for the DualTrack channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDo these brackets fit my awning brand?\u003c\/strong\u003e\u003cbr\u003e\nThey're designed to fit most leading roof-mounted awnings, including 270-degree wrap-around units and traditional straight pull-out awnings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do I need to use these mounts?\u003c\/strong\u003e\u003cbr\u003e\nYou need our DualTrack roof rail system on your Grenadier. The brackets seat directly into the DualTrack channel, so they aren't meant to bolt to a bare roof or to standard crossbars without that channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do they raise the awning off the rail?\u003c\/strong\u003e\u003cbr\u003e\nThey add only about 3 inches of clearance, keeping the awning low-profile and close to the roofline.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs any drilling required?\u003c\/strong\u003e\u003cbr\u003e\nNo. It's a bolt-on install that uses the included hardware and the DualTrack channel, with no drilling or permanent modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they hold up off-road?\u003c\/strong\u003e\u003cbr\u003e\nYes. The current stainless-steel version is built to handle heavy wind loads and off-road vibration for a secure, rattle-free mount.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024286167343,"sku":"I-DT-AM","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/awning-mount-for-dualtrack-roof-rails-set-of-2-4837560.jpg?v=1774973906"},{"product_id":"exterior-utility-belt-rear-only-set-for-ineos-grenadier","title":"INEOS Grenadier: Exterior Utility Belt - Rear Section-Only","description":"\u003cp\u003eThe Exterior Utility Belt Rear Section is the entry point into the Grenadier's L-Track belt system, adding gear-mounting rails to the two rear door belt lines. It is built for owners who want rear-mounted MOLLE and recovery access now, with the option to expand to the doors or full perimeter later. Like the rest of the system, it is machined from 6061 aluminum and carries a dual anodized-and-powder-coated finish that holds up better than the factory anodize-only panels.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCovers the two rear door belt lines — rear driver and rear passenger doors\u003c\/li\u003e\n\u003cli\u003e6061 aluminum with a dual-layer finish (hard anodize under powder coat) for chip, scratch, and UV resistance\u003c\/li\u003e\n\u003cli\u003eL-Track channel accepts MOLLE panels, jerry can mounts, recovery board carriers, and tie-down anchors — the rear doors are the natural home for soft-gear MOLLE organisation you can reach without opening the boot\u003c\/li\u003e\n\u003cli\u003eBolt-on to factory rear door points — no drilling, fully reversible to stock\u003c\/li\u003e\n\u003cli\u003eOEM-equivalent stainless mounting hardware included\u003c\/li\u003e\n\u003cli\u003eModular: add the front doors or move up to the Full Set as your build grows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier Station Wagon (2023–present), all trims, with OEM-equivalent dimensions for a direct retrofit. Ideal for Grenadiers that did not include the factory Armor Utility Belt. Everything mounts through the universal L-Track standard. For four-door coverage step up to the \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-front-set-for-ineos-grenadier\"\u003eFront Section\u003c\/a\u003e, or get all six positions with the \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eFull Set\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061 aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodized + powder-coated (dual layer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePositions covered\u003c\/td\u003e\n\u003ctd\u003e2 rear door belt lines (of 6 possible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eBolt-on to factory points, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003eApproximately 30–45 minutes with hand tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eOEM-equivalent stainless, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccessory standard\u003c\/td\u003e\n\u003ctd\u003eL-Track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReversible\u003c\/td\u003e\n\u003ctd\u003eYes — returns to stock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 rear driver-side utility belt rail\u003c\/li\u003e\n\u003cli\u003e1 rear passenger-side utility belt rail\u003c\/li\u003e\n\u003cli\u003eOEM-equivalent stainless mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Rear Section cover?\u003c\/strong\u003e\u003cbr\u003e\nThe two rear door belt lines only — rear driver and rear passenger. It does not include the front doors or the rear trunk panels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy start with the rear?\u003c\/strong\u003e\u003cbr\u003e\nThe rear doors are the most practical spot for MOLLE panels and recovery gear you want to reach without opening the tailgate. It is the lowest-cost way into the system, and you can expand later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I add the rest of the belt?\u003c\/strong\u003e\u003cbr\u003e\nAdd the \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-front-set-for-ineos-grenadier\"\u003eFront Section\u003c\/a\u003e for the front doors, or move to the \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eFull Set\u003c\/a\u003e for all four doors plus both rear trunk panels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I mount to it?\u003c\/strong\u003e\u003cbr\u003e\nAny standard L-Track accessory — MOLLE panels, jerry can carriers, recovery board mounts, and tie-down anchors. Pair it with our \u003ca href=\"https:\/\/nvmos.com\/products\/l-track-slider-for-dualtrack-roof-rails-ineos-grenadier-utility-belt\"\u003eL-Track sliders\u003c\/a\u003e for adjustable anchor points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to drill?\u003c\/strong\u003e\u003cbr\u003e\nNo. It bolts to factory rear door points and reverses cleanly to stock.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024288133423,"sku":"I-UB-P","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/dva-exterior-utility-belt-full-set-for-ineos-grenadier-5109039.jpg?v=1774973910"},{"product_id":"interior-utility-rails-for-ineos-grenadier","title":"INEOS Grenadier: Interior Utility Rails","description":"\u003cp\u003eThe Interior Utility Rails turn the INEOS Grenadier's rear cargo area into a configurable L-Track load system, mounting along the driver and passenger sides of the trunk. Machined from anodized 6061 aluminum, they install with a direct bolt-on to factory points and give you movable anchor positions for tie-downs, hooks, dividers, and cargo boxes — a stronger, better-finished answer for owners whose Grenadier didn't come with the factory interior rail option.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e6061 aluminum construction for a high strength-to-weight ratio with real off-road durability\u003c\/li\u003e\n\u003cli\u003eAnodized finish resists fading, scratches, corrosion, and wear\u003c\/li\u003e\n\u003cli\u003eFull L-Track channel accepts tie-down rings, gear hooks, threaded lugs, dividers, and other L-Track fittings — reposition anchor points anywhere along the rail\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on to factory interior mounting points — no drilling\u003c\/li\u003e\n\u003cli\u003eShips as a pair for the driver and passenger sides of the trunk\u003c\/li\u003e\n\u003cli\u003eOEM-equivalent hardware and instructions included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier Station Wagon (2023–present), all trims, mounting to the driver and passenger sides of the interior trunk using factory points. Intended for vehicles that did not receive the factory Interior Utility Rail System option. Uses the universal L-Track standard, so it shares accessories with our \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eExterior Utility Belt\u003c\/a\u003e and DualTrack roof system.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061 aluminum, anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e2 rails (driver \u0026amp; passenger sides)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocation\u003c\/td\u003e\n\u003ctd\u003eInterior trunk, both sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDirect bolt-on to factory points, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccessory standard\u003c\/td\u003e\n\u003ctd\u003eL-Track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eOEM-equivalent, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 interior trunk L-Track rails (driver \u0026amp; passenger)\u003c\/li\u003e\n\u003cli\u003eOEM-equivalent mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhere do these mount?\u003c\/strong\u003e\u003cbr\u003e\nAlong the driver and passenger sides of the Grenadier's interior trunk, using existing factory mounting points — no drilling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I attach to them?\u003c\/strong\u003e\u003cbr\u003e\nAny standard L-Track accessory: tie-down rings, adjustable gear hooks, threaded lugs, and cargo dividers. Add \u003ca href=\"https:\/\/nvmos.com\/products\/l-track-slider-for-dualtrack-roof-rails-ineos-grenadier-utility-belt\"\u003eL-Track sliders\u003c\/a\u003e for repositionable bolt-down points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many rails come in the set?\u003c\/strong\u003e\u003cbr\u003e\nTwo — one for each side of the trunk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these share accessories with the exterior belt?\u003c\/strong\u003e\u003cbr\u003e\nYes. All DVA utility mounting uses the universal L-Track standard, so fittings interchange between the interior rails, the \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eExterior Utility Belt\u003c\/a\u003e, and the DualTrack roof rails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs drilling required?\u003c\/strong\u003e\u003cbr\u003e\nNo. They bolt to factory points and are fully reversible.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024290066735,"sku":"I-UB-I","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/interior-utility-rails-for-ineos-grenadier-2289307.jpg?v=1774973913"},{"product_id":"exterior-utility-belt-full-set-for-ineos-grenadier","title":"INEOS Grenadier: Exterior Utility Belt - Full Set","description":"\u003cdiv class=\"nv-desc\"\u003e\n\u003ch2\u003eDVA Exterior Utility Belt — Full Set — INEOS Grenadier (2023+)\u003c\/h2\u003e\n\u003cp\u003eWrap your Grenadier’s entire perimeter in L-Track gear rails. This complete six-position set covers all four doors plus both rear trunk panels — reproducing the factory Armor Utility Belt dimension-for-dimension, but with a \u003cstrong\u003edual anodized-and-powder-coated finish\u003c\/strong\u003e that shrugs off stone chips, brush, and UV. Buy it once for whole-vehicle coverage.\u003c\/p\u003e\n\u003cdiv class=\"nv-h\"\u003eWhy it works\u003c\/div\u003e\n\u003cdiv class=\"nv-fcards\"\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eFull six-position coverage\u003c\/b\u003eAll four doors plus both rear trunk panels below the rear windows.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eDual-layer finish\u003c\/b\u003eHard anodize base + powder coat for chip and UV resistance.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eUniversal L-Track\u003c\/b\u003eMounts jerry cans, recovery boards, MOLLE, lights, and tie-downs.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eBolt-on, reversible\u003c\/b\u003eFactory points, stainless hardware, no drilling — back to stock anytime.\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nv-callout\"\u003e\n\u003cb\u003eBolt-on, fully reversible.\u003c\/b\u003e Every panel bolts to factory mounting points with the included stainless hardware — no drilling, and it returns to stock. About 60–90 minutes with hand tools.\u003c\/div\u003e\n\u003cdiv class=\"nv-h\"\u003eSpecifications\u003c\/div\u003e\n\u003ctable class=\"nv-spec\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061 aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodized + powder-coated (dual layer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePositions covered\u003c\/td\u003e\n\u003ctd\u003e6 (four doors + two rear trunk panels)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eBolt-on to factory points, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003e~60–90 min with hand tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eStainless steel screws, complete kit included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccessory standard\u003c\/td\u003e\n\u003ctd\u003eL-Track (universal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReversible\u003c\/td\u003e\n\u003ctd\u003eYes — returns to stock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eINEOS Grenadier Station Wagon (2023–present), all trims\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"nv-h\"\u003eFrequently asked questions\u003c\/div\u003e\n\u003cdiv class=\"nv-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat does the Full Set include that the section kits don't?\u003c\/summary\u003e\u003cp\u003eThe Full Set covers all six positions — the four door belt lines plus both rear trunk panels below the rear windows. The Front Section covers the four doors only; the Rear Section covers the two rear doors only.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs it the same as the factory belt?\u003c\/summary\u003e\u003cp\u003eSame dimensions and bolt-on fit, but the DVA belt uses two finish layers versus the factory's single anodize, so it holds up far better to trail abuse and UV.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat can I mount to it?\u003c\/summary\u003e\u003cp\u003eStandard L-Track accessories anywhere on the body — jerry cans, recovery boards, MOLLE panels, lights, and tie-downs.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo I need to drill?\u003c\/summary\u003e\u003cp\u003eNo — every panel bolts to factory points and the install is fully reversible to stock.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow long does installation take?\u003c\/summary\u003e\u003cp\u003eAbout 60 to 90 minutes with basic hand tools.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nv-xsell\"\u003e\n\u003cdiv class=\"nv-xh\"\u003eOutfit the Grenadier\n\u003c\/div\u003e\n\u003cdiv class=\"nv-xrow\"\u003e\n\u003ca class=\"nv-xitem\" href=\"\/products\/exterior-utility-belt-front-set-for-ineos-grenadier\"\u003e\u003cb\u003eUtility Belt: Front Set\u003c\/b\u003eFour doors only\u003c\/a\u003e\u003ca class=\"nv-xitem\" href=\"\/products\/exterior-utility-belt-rear-only-set-for-ineos-grenadier\"\u003e\u003cb\u003eUtility Belt: Rear Set\u003c\/b\u003eTwo rear doors only\u003c\/a\u003e\u003ca class=\"nv-xitem\" href=\"\/products\/ineos-grenadier-2024-present-1st-gen-rear-plate-system\"\u003e\u003cb\u003eRear Plate System\u003c\/b\u003eInterior storage foundation\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does the Full Set include that the section kits don't?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The Full Set covers all six positions — the four door belt lines plus both rear trunk panels below the rear windows. The Front Section covers the four doors only; the Rear Section covers the two rear doors only.\"}}, {\"@type\": \"Question\", \"name\": \"Is it the same as the factory belt?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Same dimensions and bolt-on fit, but the DVA belt uses two finish layers versus the factory's single anodize, so it holds up far better to trail abuse and UV.\"}}, {\"@type\": \"Question\", \"name\": \"What can I mount to it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Standard L-Track accessories anywhere on the body — jerry cans, recovery boards, MOLLE panels, lights, and tie-downs.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need to drill?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No — every panel bolts to factory points and the install is fully reversible to stock.\"}}, {\"@type\": \"Question\", \"name\": \"How long does installation take?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"About 60 to 90 minutes with basic hand tools.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024292458799,"sku":"I-UB-F","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-exterior-utility-belt-full-set-9719404.jpg?v=1774973918"},{"product_id":"l-track-slider-for-dualtrack-roof-rails-ineos-grenadier-utility-belt","title":"L-Track Slider for DualTrack Roof Rails \u0026 INEOS Grenadier Utility Belt","description":"\u003cp\u003eThese L-Track Sliders are the anchor points that make the DVA mounting system work: slide one into any L-Track channel, seat it with a quarter-turn lock, and you have a rock-solid bolt-down point exactly where you need it. They are engineered for the DualTrack Roof Rail system and drop straight into the INEOS Grenadier's Exterior Utility Belt and Interior Utility Rails as well, giving you one hardware standard inside and out. Choose M6 or M8 stud size and a 1-hole or 4-hole platform to match the gear you're mounting.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSlide-in fit for any standard L-Track channel; seats and secures with a tool-free quarter-turn locking mechanism\u003c\/li\u003e\n\u003cli\u003eReposition anywhere along the rail — unlock, slide, and relock instead of living with fixed anchor points\u003c\/li\u003e\n\u003cli\u003e1-hole slider for single-point, lightweight attachments; 4-hole slider spreads the load for heavier or multi-point gear\u003c\/li\u003e\n\u003cli\u003eM6 stud for lighter accessories; M8 stud engineered for heavy-duty loads and critical mounts\u003c\/li\u003e\n\u003cli\u003eWorks across the DVA ecosystem: \u003ca href=\"https:\/\/nvmos.com\/products\/dualtrack-roof-rail-ineos-grenadier\"\u003eDualTrack Roof Rails\u003c\/a\u003e, the \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eExterior Utility Belt\u003c\/a\u003e, and the \u003ca href=\"https:\/\/nvmos.com\/products\/interior-utility-rails-for-ineos-grenadier\"\u003eInterior Utility Rails\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSold in packs of eight sliders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eUniversal to the L-Track mounting standard, so they fit any true L-Track rail. On the INEOS Grenadier (2023–present) that means the DualTrack roof crossbars, the exterior body-mounted Utility Belt, and the interior trunk rails all take the same slider. Pick the stud size and hole count for your mission — M8 four-hole for jerry cans and recovery boards, M6 single-hole for lights and small accessories.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStud sizes\u003c\/td\u003e\n\u003ctd\u003eM6 or M8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlatform options\u003c\/td\u003e\n\u003ctd\u003e1-hole or 4-hole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack quantity\u003c\/td\u003e\n\u003ctd\u003e8 sliders per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocking\u003c\/td\u003e\n\u003ctd\u003eTool-free quarter-turn lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eUniversal L-Track (DualTrack rails, Utility Belt, Interior Utility Rails)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMachined, corrosion-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e8 L-Track sliders in the selected stud size (M6 or M8) and platform (1-hole or 4-hole)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between M6 and M8?\u003c\/strong\u003e\u003cbr\u003e\nStud diameter. M6 suits lighter gear and accessories; M8 is engineered for heavy-duty loads and critical, safety-relevant mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1-hole or 4-hole — which should I pick?\u003c\/strong\u003e\u003cbr\u003e\nThe 1-hole slider is a compact single-point anchor for lightweight gear. The 4-hole slider is a wider platform that distributes load for heavier or multi-point accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many come in a pack?\u003c\/strong\u003e\u003cbr\u003e\nEach pack contains eight sliders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need tools to install them?\u003c\/strong\u003e\u003cbr\u003e\nNo. They slide into the rail and lock with a quarter turn — no tools required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they fit rails other than the DualTrack roof system?\u003c\/strong\u003e\u003cbr\u003e\nYes. They are built to the universal L-Track standard, so they also fit the Grenadier \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eExterior Utility Belt\u003c\/a\u003e and \u003ca href=\"https:\/\/nvmos.com\/products\/interior-utility-rails-for-ineos-grenadier\"\u003eInterior Utility Rails\u003c\/a\u003e, plus any other true L-Track channel.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"M6 1-Hole 8-Pack","offer_id":56024294687023,"sku":"I-DT-1-M6","price":29.0,"currency_code":"USD","in_stock":true},{"title":"M6 4-Hole 8-Pack","offer_id":56024294719791,"sku":"I-DT-4-M6","price":39.0,"currency_code":"USD","in_stock":true},{"title":"M8 1-Hole 8-Pack","offer_id":56024294752559,"sku":"I-DT-1-M8","price":29.0,"currency_code":"USD","in_stock":true},{"title":"M8 4-Hole 8-Pack","offer_id":56024294785327,"sku":"I-DT-4-M8","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/l-track-slider-for-dualtrack-roof-rails-ineos-grenadier-utility-belt-7561707.jpg?v=1774973921"},{"product_id":"exterior-powervault-ineos-grenadier-utility-power-hub","title":"INEOS Grenadier: PowerVault™ Utility Hub R2","description":"\u003cp\u003eThe PowerVault Utility Hub R2 turns your INEOS Grenadier's factory DTP rooftop outlet into a full charging station you can stick anywhere on the truck. It plugs into an EXT port through the included DTP-to-Anderson cable, then delivers laptop-grade USB-C, fast USB-A, and a 12V socket from a rugged, weatherproof enclosure. Four industrial magnets let you snap it to a door, swing-out, or body panel with no drilling and no permanent wiring.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo USB-C ports rated 65W each — enough to charge a MacBook or fast-charge phones and tablets in the field\u003c\/li\u003e\n\u003cli\u003eTwo USB-A ports rated 22.5W each for quick top-ups of legacy devices\u003c\/li\u003e\n\u003cli\u003eOne 12V cigarette-lighter-style socket for fridges, air pumps, and other 12V accessories\u003c\/li\u003e\n\u003cli\u003eIntegrated flashlight with an on\/off switch for camp and after-dark tasks\u003c\/li\u003e\n\u003cli\u003eFour industrial-strength magnets mount it to any steel surface and reposition instantly\u003c\/li\u003e\n\u003cli\u003eWeatherproof enclosure with IP65-rated connectors shrugs off dust, mud, and rain\u003c\/li\u003e\n\u003cli\u003eRuns entirely off factory power — no drilling, no splicing, no permanent wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eBuilt for the INEOS Grenadier (Station Wagon and Quartermaster) with factory DTP rooftop power. The included 1-meter DTP-to-Anderson cable plugs into an EXT2 or EXT3 outlet, so no vehicle-side wiring changes are needed. Because it draws from the factory DTP circuit, total available current is governed by the vehicle-side DTP fuse rather than any modification to your rig.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB-C output\u003c\/td\u003e\n\u003ctd\u003e2 ports, 65W per port (MacBook capable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB-A output\u003c\/td\u003e\n\u003ctd\u003e2 ports, 22.5W per port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12V output\u003c\/td\u003e\n\u003ctd\u003e1 cigarette-lighter-style socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting\u003c\/td\u003e\n\u003ctd\u003eIntegrated switch-activated flashlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connector\u003c\/td\u003e\n\u003ctd\u003eAnderson, via included 1m DTP-to-Anderson cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower source\u003c\/td\u003e\n\u003ctd\u003eGrenadier factory DTP port (EXT2 \/ EXT3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003e4 industrial-strength magnets, repositionable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeather rating\u003c\/td\u003e\n\u003ctd\u003eIP65-rated connectors; dust, mud, and rain resistant (not rated for submersion)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFusing\u003c\/td\u003e\n\u003ctd\u003eNo hub-side fuse required; output limited by vehicle-side DTP fuse capacity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x PowerVault Utility Hub R2 enclosure with all outputs\u003c\/li\u003e\n\u003cli\u003e1x 1-meter DTP-to-Anderson power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the PowerVault get power on the Grenadier?\u003c\/strong\u003e\u003cbr\u003e\nIt connects to a factory DTP rooftop outlet (EXT2 or EXT3) using the included 1-meter DTP-to-Anderson cable. There is no cutting, splicing, or permanent wiring — the connection is fully reversible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it charge a laptop?\u003c\/strong\u003e\u003cbr\u003e\nYes. Each of the two USB-C ports delivers up to 65W, which is enough to power a MacBook or other USB-C PD laptops, plus fast-charge phones and tablets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e\u003cbr\u003e\nFour industrial-strength magnets hold it to any steel surface — a door, a rear swing-out, or a body panel — and let you reposition it in seconds with no drilling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it waterproof?\u003c\/strong\u003e\u003cbr\u003e\nThe enclosure is weatherproof and uses IP65-rated connectors, so it handles dust, mud, and rain. It is not rated for submersion, so avoid dunking it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat limits how much power I can pull?\u003c\/strong\u003e\u003cbr\u003e\nThe PowerVault itself needs no additional fuse. Total available current is set by the vehicle-side DTP fuse on the EXT port you connect to.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need any extra cables or adapters?\u003c\/strong\u003e\u003cbr\u003e\nNo. The DTP-to-Anderson cable is included, so it is plug-and-play. If you want to reach a farther port you can pair it with our \u003ca href=\"https:\/\/nvmos.com\/products\/dtp-06-2s-to-anderson-50a-3-meter\"\u003eDTP-06-2S to Anderson SB50 cable\u003c\/a\u003e.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024304025903,"sku":"I-PWR-PV","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-powervault-utility-hub-r2-1519876.jpg?v=1774973938"},{"product_id":"side-step-for-ineos-grenadier","title":"INEOS Grenadier: Side Steps Gen 2 w\/ Extended Foot, Black (Set of 2)","description":"\u003cp\u003eGetting up to the roof rack, a rooftop tent or the top of the windshield is a lot easier with a real foothold. DVA Mechanics' SideStep Gen 2 is a pair of fold-away steps that bolt to the Grenadier's rear door hinge bolts, with no drilling and nothing permanent. Gen 2 moves to stainless steel and adds a fold-out extended foot, so you get a bigger, more secure place to stand while you load gear or work on the roof. When you're done, the foot folds back into the step and the whole thing stows flat against the truck.\u003c\/p\u003e\n\u003ch2\u003eWhat's New in Gen 2\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFold-out extended foot:\u003c\/strong\u003e a second foot section swings out from the main step for a larger standing area and more room for your boot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e better corrosion resistance for a part that lives in rain, mud, road spray and snow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMounts to the rear door hinge bolts: no drilling or permanent modification, reversible to stock\u003c\/li\u003e\n\u003cli\u003eSpring-loaded lock holds the step in both the stowed and deployed positions\u003c\/li\u003e\n\u003cli\u003eThree positions: stowed flat, step deployed, or step plus extended foot\u003c\/li\u003e\n\u003cli\u003eLow profile when folded\u003c\/li\u003e\n\u003cli\u003eSet of 2, driver and passenger side\u003c\/li\u003e\n\u003cli\u003eAbout 10 minutes per side to install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow It Works\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStowed\u003c\/td\u003e\n\u003ctd\u003eThe whole assembly folds against the vehicle for a compact profile.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStep deployed\u003c\/td\u003e\n\u003ctd\u003eFold down the main step for quick roof access.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtended foot out\u003c\/td\u003e\n\u003ctd\u003eSwing out the Gen 2 foot for a bigger, steadier platform when you're working up top.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDVA Mechanics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSideStep Gen 2 with extended foot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocking\u003c\/td\u003e\n\u003ctd\u003eSpring-loaded, stowed and deployed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eRear door hinge bolts, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eSet of 2 (driver and passenger)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003eAbout 10 minutes per side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eINEOS Grenadier. The steps bolt to the rear door hinge bolt pattern. Not sure about your truck? Call us at (920) 249-7744 and we'll confirm before you order. Prefer hands-free, auto-deploying boards? See the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-electric-power-side-steps-with-led\"\u003eElectric Power Side Steps with LED\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWatch DVA's install and demo: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=WqA4Gc8pzIs\" target=\"_blank\" rel=\"noopener\"\u003eSideStep Gen 2 video\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat changed from the original SideStep?\u003c\/strong\u003e\u003cbr\u003eGen 2 is stainless steel instead of powder-coated steel and adds a fold-out extended foot for a larger standing surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere do they mount?\u003c\/strong\u003e\u003cbr\u003eEach step bolts to the Grenadier's rear door hinge bolts using the existing hardware interface. No drilling, and it goes back to stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the step stay put?\u003c\/strong\u003e\u003cbr\u003eYes. A spring-loaded lock holds the main step in both the stowed and deployed positions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are they for?\u003c\/strong\u003e\u003cbr\u003eA solid foothold for reaching the roof rack, getting into a rooftop tent, cleaning the windshield or loading gear up top.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024307630383,"sku":"I-SS-L2","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/DSC00047_b11bf9fb-e433-4b7d-b9cf-a9d0de3dda6d.jpg?v=1792372065"},{"product_id":"dtp-06-2s-to-anderson-50a-3-meter","title":"INEOS Grenadier: DTP-06-2S to Anderson SB50","description":"\u003cp\u003eConvert your INEOS Grenadier's factory DTP power outlet into a rugged Anderson SB50 connection. This heavy-gauge adapter takes the vehicle-side DTP-06-2S port and terminates it in a fast-connect Anderson SB50, the go-to connector for portable power stations, solar panels, fridges, and other high-draw 12V field equipment. The 12 AWG conductor and IP65-sealed DTP end make it a clean, no-splice way to feed quick-disconnect gear straight from the Grenadier's rooftop or accessory power.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDTP-06-2S input plugs directly into the Grenadier's factory DTP power system — no wiring modification\u003c\/li\u003e\n\u003cli\u003eAnderson SB50 output for robust, high-current, quick-connect\/disconnect use\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 12 AWG conductor rated for up to 15A continuous at 12V DC\u003c\/li\u003e\n\u003cli\u003eSealed, locking DTP connector rated to IP65 for permanent vehicle integration\u003c\/li\u003e\n\u003cli\u003eTwo lengths — 1 meter or 3 meter — to match how far your gear sits from the port\u003c\/li\u003e\n\u003cli\u003eField-service friendly for power distribution and portable equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2023–present) and any vehicle or mobile power system with a DTP-06-2S power outlet. Before use, confirm the source circuit's fuse capacity is appropriate for your load. It is not intended for direct battery connection without proper fuse protection.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connector\u003c\/td\u003e\n\u003ctd\u003eDTP-06-2S (vehicle-side)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connector\u003c\/td\u003e\n\u003ctd\u003eAnderson SB50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire gauge\u003c\/td\u003e\n\u003ctd\u003e12 AWG heavy-duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating\u003c\/td\u003e\n\u003ctd\u003e12V DC, 15A maximum continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLengths available\u003c\/td\u003e\n\u003ctd\u003e1 meter or 3 meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (sealed DTP connector)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e142 g (1 m) \/ 255 g (3 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1× DTP-06-2S to Anderson SB50 cable in the selected length\u003c\/li\u003e\n\u003cli\u003eNo inline fuse kit, battery terminals, or distribution block included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich DTP cable do I need for a fridge or portable power station?\u003c\/strong\u003e\u003cbr\u003e\nThis one. The Anderson SB50 is the standard high-current connector for fridges, inverters, battery chargers, and solar gear, and the 12 AWG conductor handles those loads up to 15A. For lower-current lights use a Weather Pack or IP65 cable instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich length should I choose?\u003c\/strong\u003e\u003cbr\u003e\nPick 1 meter when the equipment sits close to the port and 3 meter when you need to reach across the roof or into the cargo area. Both use the same 12 AWG conductor and connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to add a fuse?\u003c\/strong\u003e\u003cbr\u003e\nThe cable relies on the vehicle-side DTP circuit's existing fuse; no inline fuse is included. Never wire the Anderson end directly to a battery without adding proper fuse protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it to power a magnetic utility hub?\u003c\/strong\u003e\u003cbr\u003e\nYes. It's the same DTP-to-Anderson connection used to feed our \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-powervault-ineos-grenadier-utility-power-hub\"\u003ePowerVault Utility Hub\u003c\/a\u003e, which draws power through an Anderson SB50.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much current can it carry?\u003c\/strong\u003e\u003cbr\u003e\nUp to 15A continuous at 12V DC. Keep your accessory's draw within that figure and within the source DTP circuit's fuse rating.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"1 Meter","offer_id":56024309760303,"sku":"I-PWR-DA3","price":35.0,"currency_code":"USD","in_stock":true},{"title":"3 Meter","offer_id":56024309793071,"sku":"I-PWR-DA4","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/dva-dtp-06-2s-to-anderson-sb50-3-meter-for-ineos-grenadier-3539394.jpg?v=1774973948"},{"product_id":"dtp04-2p-female-to-ip65-waterproof-connector-cable-3-meters","title":"INEOS Grenadier: DTP04-2P Female to IP65 Waterproof Connector Cable – 3 Meters","description":"\u003cp\u003eThis 3-meter extension carries power from a DTP04-2P female source out to a sealed IP65 accessory connector, giving your INEOS Grenadier a long, weatherproof run with no hard-splicing. It's the cable you reach for when the accessory is far from the power tap — routing from an interior or under-hood DTP source down to a front bumper light, an air compressor, or camp gear at the back. One end accepts a DTP04-2P male feed; the other terminates in a 2-pin IP65 waterproof plug ready for your exterior device.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDTP04-2P female input mates with DTP04-2P male sources from splitters, harnesses, or other DTP components\u003c\/li\u003e\n\u003cli\u003e2-pin IP65 waterproof output connector resists dust and water spray for exposed exterior mounting\u003c\/li\u003e\n\u003cli\u003eFull 3-meter (about 10 ft) run for reaching front bumper, rear, or roof accessories from a protected source\u003c\/li\u003e\n\u003cli\u003e16 AWG copper core sized for continuous 12V accessory loads\u003c\/li\u003e\n\u003cli\u003eUV- and abrasion-resistant automotive jacket built for permanent, exposed routing paths\u003c\/li\u003e\n\u003cli\u003eSealed, serviceable connection — no cutting into factory wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned for INEOS Grenadier (2023–present) DTP power builds. It connects any DTP04-2P female source to a 2-pin IP65 accessory over a 3-meter run. Commonly used between under-hood or interior-protected source points and front bumper auxiliary loads. It is not intended for incompatible pinouts or for unfused direct-battery feeds; confirm your accessory's voltage, current, and connector pinout before installing.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3 meters (approx. 10 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connector\u003c\/td\u003e\n\u003ctd\u003eDTP04-2P female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connector\u003c\/td\u003e\n\u003ctd\u003e2-pin IP65 waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire gauge\u003c\/td\u003e\n\u003ctd\u003e16 AWG copper core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (dust and water-spray resistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable jacket\u003c\/td\u003e\n\u003ctd\u003eUV\/abrasion-resistant automotive insulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1× DTP04-2P female to IP65 cable assembly, 3 m length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow is this different from the DTP-06-2S to IP65 cable?\u003c\/strong\u003e\u003cbr\u003e\nThis cable's input is a DTP04-2P \u003cem\u003efemale\u003c\/em\u003e, so it plugs onto a DTP04-2P male feed — typically the output leg of a splitter or harness rather than the rooftop port itself. If you want to go straight from a factory rooftop DTP-06-2S port to an IP65 accessory, use our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-dtp-to-ip65-power-cable-awg16\"\u003eDTP-06-2S to IP65 waterproof connector cable\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat plugs into the DTP04-2P female end?\u003c\/strong\u003e\u003cbr\u003e\nAny DTP04-2P male source. That includes the female output legs of our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-dtp-06-2s-male-to-2-way-dtp04-2p-u-unbalanced-female-splitter\"\u003e2-way DTP splitters\u003c\/a\u003e once fitted with a mating male, or an accessory harness that presents a DTP04-2P male.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I shorten it?\u003c\/strong\u003e\u003cbr\u003e\nYes, a qualified installer can shorten the run, but the IP65 termination must be properly re-sealed afterward to keep its weather rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the IP65 connector submersible?\u003c\/strong\u003e\u003cbr\u003e\nNo. IP65 resists dust and pressurized water spray, which covers rain, washdowns, and trail conditions, but it is not rated for prolonged submersion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include a fuse or switch?\u003c\/strong\u003e\u003cbr\u003e\nNo. It's a power-routing cable only — no switch relay harness, fuse block, or accessory device is included. Feed it from a properly fused source.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024311562543,"sku":"I-PWR-DI3","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/dtp04-2p-female-to-ip65-waterproof-connector-cable-3-meters-8124810.jpg?v=1774973952"},{"product_id":"ineos-grenadier-rooftop-power-adapter-dtp-to-weather-pack-18","title":"INEOS Grenadier: DTP-06-2S to 2-Port Weather Pack Cable","description":"\u003cp\u003eConnect Weather Pack-equipped accessories to your INEOS Grenadier's factory rooftop power without cutting or modifying a single wire. This short 18-inch adapter takes a DTP-06-2S male plug for the Grenadier's rooftop DTP port and breaks it out to two 2-pin Weather Pack male outputs, so you can feed a pair of medium-current accessories — work lights, auxiliary fans, or 12V camp equipment — from one EXT port. It's a true plug-and-play bridge between the factory Deutsch DTP standard and the common Weather Pack connector.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDTP-06-2S male input sized for the Grenadier's factory rooftop DTP outlet\u003c\/li\u003e\n\u003cli\u003eTwo 2-pin Weather Pack male outputs to run a pair of accessories from one port\u003c\/li\u003e\n\u003cli\u003eCompact 18-inch length keeps the connection tidy right at the port\u003c\/li\u003e\n\u003cli\u003eIP65 weatherproof connectors for confident exterior use\u003c\/li\u003e\n\u003cli\u003e12V DC, 15A total capacity across both outputs\u003c\/li\u003e\n\u003cli\u003eNo splicing, cutting, or crimping — factory wiring stays intact and reversible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits INEOS Grenadier (2023–present) models with factory rooftop DTP power ports, all trims. It's intended for accessories that use, or can be fitted with, a 2-pin Weather Pack connector. Combined draw of both outputs must stay within the source EXT port's fuse rating.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connector\u003c\/td\u003e\n\u003ctd\u003eDTP-06-2S male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connectors\u003c\/td\u003e\n\u003ctd\u003e2× Weather Pack 2-pin male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e18 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating\u003c\/td\u003e\n\u003ctd\u003e12V DC, 15A total capacity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (weatherproof connectors)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug \u0026amp; play, no splicing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1× DTP-06-2S male to 2-port Weather Pack 2-pin male adapter cable (18\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich DTP cable do I need if my accessory uses a Weather Pack connector?\u003c\/strong\u003e\u003cbr\u003e\nThis one. It's the direct bridge from the Grenadier's DTP-06-2S rooftop port to Weather Pack 2-pin accessories, and it gives you two outputs for medium-current gear like LED light bars, fans, and pumps. For an Anderson SB50 device pick the \u003ca href=\"https:\/\/nvmos.com\/products\/dtp-06-2s-to-anderson-50a-3-meter\"\u003eDTP to Anderson SB50 cable\u003c\/a\u003e; for a sealed IP65 device use a \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-dtp-to-ip65-power-cable-awg16\"\u003eDTP to IP65 cable\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it split one port into two?\u003c\/strong\u003e\u003cbr\u003e\nYes. A single DTP-06-2S input feeds two Weather Pack outputs, so you can run two accessories from one rooftop port without adding a separate splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I have to modify any factory wiring?\u003c\/strong\u003e\u003cbr\u003e\nNo. The DTP end plugs into the factory rooftop port and your accessories plug into the Weather Pack outputs. Nothing is cut or spliced, and it unplugs to return to stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much can it carry?\u003c\/strong\u003e\u003cbr\u003e\n12V DC with 15A total across both outputs. Keep the combined accessory draw within that figure and within the source port's fuse rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I need more DTP outputs elsewhere on the roof?\u003c\/strong\u003e\u003cbr\u003e\nAdd a \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-dtp06-power-splitter-cable-waterproof\"\u003eDTP to IP65 waterproof splitter\u003c\/a\u003e or one of our other \u003ca href=\"https:\/\/nvmos.com\/collections\/ineos-grenadier\"\u003eGrenadier DTP power adapters\u003c\/a\u003e to expand another port.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024313397551,"sku":"I-PWR-WP","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/dtp-06-2s-to-2-port-weather-pack-6794820.jpg?v=1774973955"},{"product_id":"rear-ladder-recovery-board-carrier-ineos-grenadier","title":"INEOS Grenadier: Ladder-Mounted Recovery Board Carrier – MaxTrax MKII \u0026 Lite","description":"\u003cp\u003eCarry your traction boards where they belong on an expedition rig — off the roof and out of the cabin — with a carrier engineered around the INEOS Grenadier's factory rear ladder. The mount brackets bolt straight to the ladder rungs with no drilling, then hold MaxTrax-style boards flat against the tailgate so they ride silent and rattle-free until a recovery calls for them. A tool-free quick-release pin set lets you pull the boards in seconds when you're stuck.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePurpose-built for the Grenadier's factory rear ladder geometry — no universal clamps or adapter plates\u003c\/li\u003e\n\u003cli\u003eBolt-on installation using the existing ladder rungs; no drilling or cutting of the vehicle\u003c\/li\u003e\n\u003cli\u003eTool-free quick-release pin system for fast board deployment when a recovery counts\u003c\/li\u003e\n\u003cli\u003eZero-rattle retention keeps boards locked flat and quiet on washboard, dunes, and rough trail\u003c\/li\u003e\n\u003cli\u003eHigh-strength anodized aluminum construction resists corrosion and overland abuse\u003c\/li\u003e\n\u003cli\u003eLeaves the ladder fully usable and the rear door accessible with the boards mounted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned specifically for the INEOS Grenadier (2023–present) equipped with the factory rear ladder. The carrier holds MaxTrax MKII, MaxTrax Lite, and similarly sized traction boards from other manufacturers. It is a ladder-mounted solution — if you run your boards on a roof rack or side rail instead, see our \u003ca href=\"https:\/\/nvmos.com\/products\/recovery-board-carrier\"\u003eUniversal Recovery Board Carrier\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-strength anodized aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting location\u003c\/td\u003e\n\u003ctd\u003eFactory rear ladder (INEOS Grenadier)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-on, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard access\u003c\/td\u003e\n\u003ctd\u003eTool-free quick-release pin system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard compatibility\u003c\/td\u003e\n\u003ctd\u003eMaxTrax MKII, MaxTrax Lite, and similar traction boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLadder-mounted recovery board carrier\u003c\/li\u003e\n\u003cli\u003eLadder mounting brackets\u003c\/li\u003e\n\u003cli\u003eQuick-release pin set\u003c\/li\u003e\n\u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich recovery boards fit this carrier?\u003c\/strong\u003e\u003cbr\u003e\nIt is built around MaxTrax MKII and MaxTrax Lite boards and accepts other traction boards of similar dimensions. It does not include the boards themselves.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require drilling into my Grenadier?\u003c\/strong\u003e\u003cbr\u003e\nNo. The brackets bolt directly to the factory rear ladder using the included hardware — no drilling, cutting, or permanent modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I still use the ladder and open the rear door with boards mounted?\u003c\/strong\u003e\u003cbr\u003e\nYes. The carrier is positioned to keep the ladder climbable and the rear door operable while the boards are stowed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow quickly can I get the boards off in a recovery?\u003c\/strong\u003e\u003cbr\u003e\nThe tool-free quick-release pins let you free the boards in seconds without hunting for a wrench or ratchet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003e\nHigh-strength anodized aluminum, chosen for corrosion resistance and light weight so it does not add meaningful mass to the rear of the vehicle.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024315199791,"sku":"I-RL-RC","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/rear-ladder-mounted-recovery-board-carrier-for-ineos-grenadier-fits-maxtrax-mkii-lite-more-1081378.jpg?v=1774973958"},{"product_id":"side-accessory-carrier-for-ineos-grenadier-gen-2","title":"INEOS Grenadier: Side Accessory Carrier, Gen 2","description":"\u003cp\u003eThe Gen 2 Side Accessory Carrier bridges your INEOS Grenadier's factory roof rails down to the L-Track utility belt, creating a full-length vertical mounting rail along each side of the vehicle. Machined from black anodized 6061 aluminum, it converts dead body-panel space into organized, accessible gear storage for jerry cans, recovery boards, and more, with zero drilling and zero rattle.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachined black anodized 6061 aluminum, lightweight and corrosion-proof\u003c\/li\u003e\n\u003cli\u003e25 lb load rating per rail, engineered for heavy or offset loads\u003c\/li\u003e\n\u003cli\u003eBridges factory roof rails to the L-Track utility belt for a continuous side mounting surface\u003c\/li\u003e\n\u003cli\u003eLower-profile Gen 2 design reduces wind noise and fuel-economy impact\u003c\/li\u003e\n\u003cli\u003e100% bolt-on in under 30 minutes with no drilling\u003c\/li\u003e\n\u003cli\u003eOffered in 1-, 2-, and 4-rail kits to match your build\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier Station Wagon (2021-2026, all trims). It is not compatible with the Quartermaster pickup. The carrier mounts to the factory roof rails and the Grenadier L-Track utility belt using the included brackets, so you will want the utility belt installed. No modifications to the vehicle are required.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eBlack anodized 6061 aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad rating\u003c\/td\u003e\n\u003ctd\u003e25 lb per rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit options\u003c\/td\u003e\n\u003ctd\u003e1-rail, 2-rail, 4-rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e680 g (1-rail) \/ 1,706 g (2-rail) \/ 3,856 g (4-rail)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFactory roof rails and L-Track utility belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003e100% bolt-on, under 30 min, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eGrenadier Station Wagon 2021-2026 (not Quartermaster)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGen 2 side accessory carrier rail(s) per selected kit\u003c\/li\u003e\n\u003cli\u003eCustom roof bracket\u003c\/li\u003e\n\u003cli\u003eIntegrated L-Track mounting bolt\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can each rail hold?\u003c\/strong\u003e\u003cbr\u003e\nEach rail is rated to 25 lb, engineered to stay solid even with heavy or offset overland loads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does it mount to?\u003c\/strong\u003e\u003cbr\u003e\nIt spans the factory roof rails and the L-Track utility belt, so the utility belt should be installed. Installation is 100% bolt-on with no drilling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich kit should I choose?\u003c\/strong\u003e\u003cbr\u003e\nPick 1-, 2-, or 4-rail based on how much gear you carry. The 2- and 4-rail kits give you more mounting points per side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit the Grenadier Quartermaster?\u003c\/strong\u003e\u003cbr\u003e\nNo. It is designed for the Grenadier Station Wagon (2021-2026) and is not compatible with the Quartermaster pickup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat accessories can I mount on it?\u003c\/strong\u003e\u003cbr\u003e\nIt accepts our \u003ca href=\"https:\/\/nvmos.com\/products\/20l-nato-jerry-can-carrier-for-side-mount-rails\"\u003e20L NATO Jerry Can Carrier\u003c\/a\u003e, recovery board carriers, and other side-mount overland accessories.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"2-Rail Kit","offer_id":56024319459631,"sku":"I-WM-2-V2","price":179.0,"currency_code":"USD","in_stock":true},{"title":"4-Rail Kit","offer_id":56024319492399,"sku":"I-WM-4-V2","price":299.0,"currency_code":"USD","in_stock":true},{"title":"1-Rail Kit","offer_id":56024319525167,"sku":"I-WM-1-V2","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-side-accessory-carrier-gen-2-8074664.jpg?v=1774973965"},{"product_id":"rear-ladder-mounted-accessory-carrier-for-ineos-grenadier-gen2","title":"INEOS Grenadier: Ladder-Mounted Accessory Carrier – Modular Gear Mount, Gen 2","description":"\u003cp\u003eThe Gen 2 Ladder-Mounted Accessory Carrier turns your INEOS Grenadier's factory rear ladder into a modular gear-hauling platform. Its bracket-and-rail system accepts jerry cans, MOLLE panels, recovery boards, and other overland essentials from a single mount while leaving the ladder fully climbable. Bolt it on once, then reconfigure your load-out as each trip demands.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModular bracket-and-rail platform mounts directly to the Grenadier's factory rear ladder\u003c\/li\u003e\n\u003cli\u003eCarries jerry cans, MOLLE panels, recovery boards, and other overland gear from one mount\u003c\/li\u003e\n\u003cli\u003ePositioned to keep the rungs accessible so the ladder stays fully usable\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant construction built for sustained trail and weather exposure\u003c\/li\u003e\n\u003cli\u003eShips with all mounting hardware for a fast, hassle-free bolt-on setup\u003c\/li\u003e\n\u003cli\u003eGen 2 revision with improved fit and modularity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2023-present) equipped with the factory rear ladder. The carrier clamps to the ladder itself, so there is no drilling into the body. It concentrates gear at the tailgate; owners who also want gear along the vehicle's flanks often add the \u003ca href=\"https:\/\/nvmos.com\/products\/side-accessory-carrier-for-ineos-grenadier-gen-2\"\u003eSide Accessory Carrier\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount location\u003c\/td\u003e\n\u003ctd\u003eFactory rear ladder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eCorrosion-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarries\u003c\/td\u003e\n\u003ctd\u003eJerry cans, MOLLE panels, recovery boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGeneration\u003c\/td\u003e\n\u003ctd\u003eGen 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-on to ladder, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGen 2 ladder-mounted accessory carrier\u003c\/li\u003e\n\u003cli\u003eModular bracket and rail system\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan I still use the ladder with the carrier installed?\u003c\/strong\u003e\u003cbr\u003e\nYes. The carrier is positioned to keep the rungs accessible, so the ladder remains fully climbable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I mount to it?\u003c\/strong\u003e\u003cbr\u003e\nJerry cans, MOLLE panels, recovery boards, and similar overland gear. Add reserve fuel by pairing it with our \u003ca href=\"https:\/\/nvmos.com\/products\/20l-nato-jerry-can-carrier-for-side-mount-rails\"\u003e20L NATO Jerry Can Carrier\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require drilling?\u003c\/strong\u003e\u003cbr\u003e\nNo. It bolts to the Grenadier's factory rear ladder using the included hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the ladder carrier or the side carrier?\u003c\/strong\u003e\u003cbr\u003e\nThe ladder carrier concentrates gear at the rear door, while the Side Accessory Carrier spreads it along the vehicle's sides. Many owners run both for maximum external storage.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024321392943,"sku":"I-RLM-JC-V2","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/rear-ladder-mounted-universal-accessory-carrier-for-ineos-grenadier-gen-2-998070.jpg?v=1774973968"},{"product_id":"dualtrack-roof-rail-ineos-grenadier","title":"INEOS Grenadier: DualTrack-T™ MAX (Gen 2) Cross Bar Rail Kit with L-Track \u0026 25mm T-Slot","description":"\u003cdiv class=\"nv-desc\"\u003e\n\u003ch2\u003eDVA DualTrack-T™ MAX (Gen 2) Cross Bars — INEOS Grenadier\u003c\/h2\u003e\n\u003cp\u003eTurn your Grenadier’s roof into a fully modular platform. Each low-profile 6061-T6 aluminum bar carries two mounting standards at once — a full-length row of L-Track plus a 25mm T-Slot — so tents, awnings, solar, recovery boards, cargo boxes, and Starlink mounts all bolt on \u003cstrong\u003ewithout adapter plates and without drilling\u003c\/strong\u003e. At about a 1″ profile it sits below the gutter line and still clears a standard 7-ft garage door.\u003c\/p\u003e\n\u003cdiv class=\"nv-h\"\u003eWhy it works\u003c\/div\u003e\n\u003cdiv class=\"nv-fcards\"\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eTwo standards per bar\u003c\/b\u003eFull-length L-Track + a 25mm T-Slot — no adapter plates.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eLow ~1″ profile\u003c\/b\u003eBelow the gutter line; clears a standard 7-ft garage door.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003e6061-T6 aluminum\u003c\/b\u003eAircraft-grade, low-profile extrusion.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eNo-drill bolt-on\u003c\/b\u003eFactory roof points, ~45 min, fully reversible.\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nv-callout\"\u003e\n\u003cb\u003ePick your kit:\u003c\/b\u003e the 2-rail kit (I-RR-DTT-2) covers awnings and lighter cargo; the 4-rail kit (I-RR-DTT-4) adds front, dual-center, and rear bars and is roof-top-tent ready.\u003c\/div\u003e\n\u003cdiv class=\"nv-h\"\u003eSpecifications\u003c\/div\u003e\n\u003ctable class=\"nv-spec\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 aircraft aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFull-length L-Track + 25mm T-Slot (per bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar length\u003c\/td\u003e\n\u003ctd\u003e58.5 in (149 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile height\u003c\/td\u003e\n\u003ctd\u003e~1 in (2.5 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad (2-rail)\u003c\/td\u003e\n\u003ctd\u003e300 lb static \/ 150 lb dynamic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad (4-rail)\u003c\/td\u003e\n\u003ctd\u003e600 lb static \/ 300 lb dynamic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall\u003c\/td\u003e\n\u003ctd\u003eFactory bolt-on, no drilling, ~45 min, reversible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3-year (manufacturing defects)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eINEOS Grenadier Wagon \u0026amp; Quartermaster (2023+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"nv-h\"\u003eFrequently asked questions\u003c\/div\u003e\n\u003cdiv class=\"nv-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I need adapter plates?\u003c\/summary\u003e\u003cp\u003eNo — each bar has a full-length L-Track row plus a 25mm T-Slot, so L-Track hardware and 25mm T-Slot hardware both drop straight in and lock anywhere along the rail.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhich kit do I need for a rooftop tent?\u003c\/summary\u003e\u003cp\u003eThe 4-rail kit — it adds front, two center, and rear bars and is rated to 600 lb static \/ 300 lb dynamic. The 2-rail kit (300\/150) suits awnings and lighter cargo.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill my Grenadier still fit in the garage?\u003c\/summary\u003e\u003cp\u003eThe bars sit at about a 1-inch profile and are designed to clear a standard 7-foot garage door, depending on what you've mounted on top.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes it require drilling?\u003c\/summary\u003e\u003cp\u003eNo — it bolts to the Grenadier's factory roof attachment points in about 45 minutes and is fully reversible.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes it fit the Quartermaster?\u003c\/summary\u003e\u003cp\u003eYes — it's confirmed to fit both the Grenadier Wagon and the Quartermaster, 2023 to present.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nv-xsell\"\u003e\n\u003cdiv class=\"nv-xh\"\u003eBuild the Grenadier roof\n\u003c\/div\u003e\n\u003cdiv class=\"nv-xrow\"\u003e\n\u003ca class=\"nv-xitem\" href=\"\/products\/l-track-slider-for-dualtrack-roof-rails-ineos-grenadier-utility-belt\"\u003e\u003cb\u003eL-Track Sliders\u003c\/b\u003eAdjustable bolt-down points\u003c\/a\u003e\u003ca class=\"nv-xitem\" href=\"\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003e\u003cb\u003eExterior Utility Belt\u003c\/b\u003eL-Track gear on the body\u003c\/a\u003e\u003ca class=\"nv-xitem\" href=\"\/collections\/ineos-grenadier\"\u003e\u003cb\u003eAll Grenadier Gear\u003c\/b\u003eMore for the Grenadier\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Do I need adapter plates?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No — each bar has a full-length L-Track row plus a 25mm T-Slot, so L-Track hardware and 25mm T-Slot hardware both drop straight in and lock anywhere along the rail.\"}}, {\"@type\": \"Question\", \"name\": \"Which kit do I need for a rooftop tent?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The 4-rail kit — it adds front, two center, and rear bars and is rated to 600 lb static \/ 300 lb dynamic. The 2-rail kit (300\/150) suits awnings and lighter cargo.\"}}, {\"@type\": \"Question\", \"name\": \"Will my Grenadier still fit in the garage?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The bars sit at about a 1-inch profile and are designed to clear a standard 7-foot garage door, depending on what you've mounted on top.\"}}, {\"@type\": \"Question\", \"name\": \"Does it require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No — it bolts to the Grenadier's factory roof attachment points in about 45 minutes and is fully reversible.\"}}, {\"@type\": \"Question\", \"name\": \"Does it fit the Quartermaster?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes — it's confirmed to fit both the Grenadier Wagon and the Quartermaster, 2023 to present.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"DVA Mechanics","offers":[{"title":"4-Rail Kit","offer_id":56024325488943,"sku":"I-RR-DTT-4","price":799.0,"currency_code":"USD","in_stock":true},{"title":"2-Rail Kit","offer_id":56024325521711,"sku":"I-RR-DTT-2","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/DSC00006_f5484613-8ce5-4c56-a3aa-d9ee799698da.webp?v=1786133055"},{"product_id":"rear-spoiler-gloss-black-fits-ineos-grenadier-wagon","title":"INEOS Grenadier: Rear Spoiler | Gloss Black or Scottish White","description":"\u003cdiv class=\"nv-desc\"\u003e\n\u003ch2\u003eDVA Rear Spoiler (Gloss Black) — INEOS Grenadier Wagon (2023+)\u003c\/h2\u003e\n\u003cp\u003eSharpen the back end of your Grenadier Wagon with a spoiler that looks like it rolled off the factory line. Molded from automotive-grade ABS with a deep, UV-stable gloss-black finish, it’s shaped specifically for the Wagon’s roofline and installs with \u003cstrong\u003eno drilling\u003c\/strong\u003e using automotive-grade tape — a clean styling upgrade that pairs with the Grenadier’s blacked-out trim and comes off cleanly if you ever want stock back.\u003c\/p\u003e\n\u003cdiv class=\"nv-h\"\u003eWhy it works\u003c\/div\u003e\n\u003cdiv class=\"nv-fcards\"\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eFactory-style fit\u003c\/b\u003eCustom-shaped to the Grenadier Wagon roofline.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eGloss-black ABS\u003c\/b\u003eImpact-resistant, UV-stable finish that matches factory trim.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eNo-drill install\u003c\/b\u003eAutomotive-grade double-sided tape; adhesion promoter included.\n\u003c\/div\u003e\n\u003cdiv class=\"nv-fcard\"\u003e\n\u003cb\u003eReversible\u003c\/b\u003eRemoves cleanly with heat — no paint damage when done right.\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nv-callout\"\u003e\n\u003cb\u003eFits the Grenadier Wagon (2023+) only\u003c\/b\u003e — not the Quartermaster. For the best bond, install at 70°F (21°C) minimum on a clean, wax-free surface and let it cure 24 hours before driving.\u003c\/div\u003e\n\u003cdiv class=\"nv-h\"\u003eSpecifications\u003c\/div\u003e\n\u003ctable class=\"nv-spec\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAutomotive-grade ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGloss black, UV-stable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo-drill, automotive-grade double-sided tape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall temp\u003c\/td\u003e\n\u003ctd\u003e70°F \/ 21°C minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCure time\u003c\/td\u003e\n\u003ctd\u003e24 hours before driving\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIn the box\u003c\/td\u003e\n\u003ctd\u003eSpoiler, double-sided tape, adhesion-promoter wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eGrenadier Wagon (2023+); not Quartermaster\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"nv-h\"\u003eFrequently asked questions\u003c\/div\u003e\n\u003cdiv class=\"nv-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it require drilling?\u003c\/summary\u003e\u003cp\u003eNo — it mounts with automotive-grade double-sided tape and an adhesion-promoter wipe, so there's no drilling or permanent modification.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWill it fit my Quartermaster?\u003c\/summary\u003e\u003cp\u003eNo — it's custom-shaped to the Grenadier Wagon roofline (2023+) and does not fit the Quartermaster.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow should I install it for the best bond?\u003c\/summary\u003e\u003cp\u003eOn a clean, wax-free surface at 70F (21C) minimum, then let it cure 24 hours before driving.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I remove it later?\u003c\/summary\u003e\u003cp\u003eYes — when installed correctly it removes cleanly with heat and is fully reversible without paint damage.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat's it made of?\u003c\/summary\u003e\u003cp\u003eAutomotive-grade ABS with a UV-stable, impact-resistant gloss-black finish that matches the Grenadier's trim.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nv-xsell\"\u003e\n\u003cdiv class=\"nv-xh\"\u003eStyle the Grenadier\n\u003c\/div\u003e\n\u003cdiv class=\"nv-xrow\"\u003e\n\u003ca class=\"nv-xitem\" href=\"\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003e\u003cb\u003eExterior Utility Belt\u003c\/b\u003eL-Track gear mounting\u003c\/a\u003e\u003ca class=\"nv-xitem\" href=\"\/products\/ineos-grenadier-spare-tire-utility-system\"\u003e\u003cb\u003eSpare Tire System\u003c\/b\u003eStorage, cover \u0026amp; table\u003c\/a\u003e\u003ca class=\"nv-xitem\" href=\"\/collections\/ineos-grenadier\"\u003e\u003cb\u003eAll Grenadier Gear\u003c\/b\u003eMore for the Grenadier\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does it require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No — it mounts with automotive-grade double-sided tape and an adhesion-promoter wipe, so there's no drilling or permanent modification.\"}}, {\"@type\": \"Question\", \"name\": \"Will it fit my Quartermaster?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No — it's custom-shaped to the Grenadier Wagon roofline (2023+) and does not fit the Quartermaster.\"}}, {\"@type\": \"Question\", \"name\": \"How should I install it for the best bond?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"On a clean, wax-free surface at 70F (21C) minimum, then let it cure 24 hours before driving.\"}}, {\"@type\": \"Question\", \"name\": \"Can I remove it later?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes — when installed correctly it removes cleanly with heat and is fully reversible without paint damage.\"}}, {\"@type\": \"Question\", \"name\": \"What's it made of?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Automotive-grade ABS with a UV-stable, impact-resistant gloss-black finish that matches the Grenadier's trim.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"DVA Mechanics","offers":[{"title":"Gloss Black","offer_id":56024327356719,"sku":"I-RS-B","price":369.0,"currency_code":"USD","in_stock":true},{"title":"Scottish White","offer_id":58674446827823,"sku":"I-RS-W","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-rear-spoiler-gloss-black-8592224.jpg?v=1774973979"},{"product_id":"ineos-grenadier-dtp06-power-splitter-cable-waterproof","title":"INEOS Grenadier: DTP-06-2S to IP65 Waterproof Splitter","description":"\u003cp\u003eExpand one INEOS Grenadier rooftop DTP outlet into two sealed, weatherproof feeds. This splitter plugs a DTP-06-2S male into a single factory rooftop port and breaks it out to two IP65 waterproof connectors, letting you run a pair of exterior accessories — scene lighting plus a comms antenna, or two camp lights — without cutting factory wiring. The 16 AWG conductors and IP65 outputs are built for permanent, year-round rooftop use.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne DTP-06-2S male input; two IP65 waterproof outputs (1-in, 2-out)\u003c\/li\u003e\n\u003cli\u003eSealed IP65 output connectors resist dust and water spray when properly mated\u003c\/li\u003e\n\u003cli\u003e16 AWG conductors for reliable 12V accessory feeds\u003c\/li\u003e\n\u003cli\u003eRuns two rooftop accessories from a single DTP source — no cutting or splicing\u003c\/li\u003e\n\u003cli\u003eIdeal for combining camp\/scene lighting with communications or low-current rooftop devices\u003c\/li\u003e\n\u003cli\u003eSafe for year-round installation with proper strain relief on the roof\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned specifically for the INEOS Grenadier (2023–present) rooftop DTP power system, all trims. It is not a voltage converter and is not for high-current loads beyond the source circuit limits. Verify each accessory's current draw and confirm its connector mates to the IP65 output before ordering.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connector\u003c\/td\u003e\n\u003ctd\u003eDTP-06-2S male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connectors\u003c\/td\u003e\n\u003ctd\u003e2× IP65 waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e1-in, 2-out splitter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire gauge\u003c\/td\u003e\n\u003ctd\u003e16 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating\u003c\/td\u003e\n\u003ctd\u003e12V DC, 15A total maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (weatherproof outputs when mated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e227 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1× DTP-06-2S to dual IP65 splitter cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot included: accessory lights or devices, fuse upgrades, or switch controllers.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich splitter do I need — this IP65 version or the DTP04-2P version?\u003c\/strong\u003e\u003cbr\u003e\nChoose this one when your two accessories terminate in sealed 2-pin IP65 connectors, which is common for exterior rooftop lighting. If your accessories use DTP-04-2P male plugs instead, pick our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-dtp-06-2s-male-to-2-way-dtp04-2p-u-unbalanced-female-splitter\"\u003eDTP-06-2S to 2-way DTP04-2P splitter\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan both outputs run at full load at the same time?\u003c\/strong\u003e\u003cbr\u003e\nBoth outputs are live together, but only within the source circuit and fuse limits — the combined draw of both accessories must stay within the port's rating (15A total).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include an inline fuse?\u003c\/strong\u003e\u003cbr\u003e\nNo. There's no inline fuse; upstream protection from the vehicle's DTP circuit is required. It is also not a voltage converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe to leave installed year-round?\u003c\/strong\u003e\u003cbr\u003e\nYes. The IP65 outputs are weatherproof when properly mated, and the splitter is fine for permanent installation as long as you add proper strain relief so the connectors aren't stressed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I feed a longer run off one of the outputs?\u003c\/strong\u003e\u003cbr\u003e\nYes — pair an output with our \u003ca href=\"https:\/\/nvmos.com\/products\/dtp04-2p-female-to-ip65-waterproof-connector-cable-3-meters\"\u003e3-meter IP65 extension cable\u003c\/a\u003e to reach an accessory farther from the port.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024330928431,"sku":"I-PWR-2WP","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/dtp-06-2s-to-ip65-waterproof-splitter-1821283.jpg?v=1774973985"},{"product_id":"ineos-grenadier-rooftop-power-adapter-dtp06-2s-male-to-2-way-dtp04-2p-splitter","title":"INEOS Grenadier: DTP-06-2S Male to 2-Way DTP04-2P Female Splitter","description":"\u003cp\u003eThis DTP splitter lets you run two accessories from a single INEOS Grenadier rooftop outlet. One DTP06-2S male plug goes into the factory EXT port, and two DTP-04-2P female outputs come back out — so a single connection now powers a pair of devices. It is a balanced splitter, plug-and-play, with no cutting, crimping, or changes to your OEM wiring.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSplits one factory DTP outlet into two DTP-04-2P female outputs\u003c\/li\u003e\n\u003cli\u003eBalanced design shares the circuit evenly between both legs\u003c\/li\u003e\n\u003cli\u003eLocking, weatherproof DTP connectors keep the connection secure on the roof\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play — no tools, no crimping, no splicing\u003c\/li\u003e\n\u003cli\u003eLeaves factory OEM wiring completely intact and fully reversible\u003c\/li\u003e\n\u003cli\u003eFrees up a second powered connection when your EXT ports are already allocated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier across all trims, connecting to the factory DTP rooftop outlets (typically EXT2 or EXT3). The Grenadier has a fixed number of EXT outlets, so this splitter is the clean way to add a second accessory once your ports are spoken for. A common pairing is running a directional side light and a wide-beam flood from the same port.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connector\u003c\/td\u003e\n\u003ctd\u003eDTP06-2S male (vehicle side)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connectors\u003c\/td\u003e\n\u003ctd\u003e2x DTP-04-2P female (accessory side)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eBalanced splitter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating\u003c\/td\u003e\n\u003ctd\u003e12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eLocking, weatherproof DTP standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug-and-play, no tools or crimping; fully reversible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x DTP splitter cable — DTP06-2S male to 2x DTP-04-2P female\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this splitter do?\u003c\/strong\u003e\u003cbr\u003e\nIt converts a single Grenadier DTP rooftop outlet into two DTP-04-2P female connections, letting you power two accessories from one EXT port without adding wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much can I run through it?\u003c\/strong\u003e\u003cbr\u003e\nThe combined wattage of both connected accessories must stay within the EXT port's rated output. As a rule of thumb, two lights drawing around 30W each (about 60W total) is a typical safe load; check your port rating for higher-draw gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need any wiring or crimping?\u003c\/strong\u003e\u003cbr\u003e\nNo. It plugs directly into the factory DTP outlet and your accessories plug into it — no cutting, splicing, or crimping, and nothing about the OEM harness is modified.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between this and the unbalanced version?\u003c\/strong\u003e\u003cbr\u003e\nThis is the balanced splitter, which shares the circuit evenly between both legs. If you need fixed-length legs for a specific routing, see our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-dtp-06-2s-male-to-2-way-dtp04-2p-u-unbalanced-female-splitter\"\u003eDTP-06-2S to 2-Way DTP04-2P-U unbalanced splitter\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a typical use case?\u003c\/strong\u003e\u003cbr\u003e\nRunning a \u003ca href=\"https:\/\/nvmos.com\/products\/led-side-light-for-ineos-grenadier-roof-bar-mount-dtp-plug-in\"\u003eLED Side Light\u003c\/a\u003e and an \u003ca href=\"https:\/\/nvmos.com\/products\/led-side-flood-light-ineos-grenadier-roof-bar-dtp-plug-in\"\u003eLED Side Flood Light\u003c\/a\u003e from the same EXT outlet — directional trail lighting and wide-area flood from one connection.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024332206383,"sku":"I-PWR-2WS","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/dtp-06-2s-male-to-2-way-dtp04-2p-female-splitter-1159247.jpg?v=1774973988"},{"product_id":"starlink-mini-roof-rail-mount-ineos-grenadier-kickstand","title":"INEOS Grenadier: Starlink Mini Roof Mount v2 – Rail \u0026 Kickstand","description":"\u003cp\u003eKeep Starlink connectivity running off-grid with a mount engineered to clamp onto the INEOS Grenadier's factory roof rails and hold the Starlink Mini secure at speed. This Gen 2 version ditches the flimsy plastic stand that ships with the Mini and replaces it with an integrated anti-theft kickstand that locks in at your chosen angle. Setup is tool-free, the geometry is adjustable for a clean line of sight, and the aircraft-grade aluminum shrugs off high-altitude cold, dust, and heavy rain.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClamps to the Grenadier's factory roof rails for a rock-solid, rattle-free hold\u003c\/li\u003e\n\u003cli\u003eIntegrated anti-theft kickstand replaces the Mini's flimsy plastic stand and locks in position\u003c\/li\u003e\n\u003cli\u003eTool-free field setup with a secure clamping mechanism — no drilling, no adhesive\u003c\/li\u003e\n\u003cli\u003eAdjustable mounting geometry for optimal satellite line-of-sight, parked or moving\u003c\/li\u003e\n\u003cli\u003eAircraft-grade black anodized aluminum resists corrosion, abrasion, and extreme weather\u003c\/li\u003e\n\u003cli\u003eLow-drag, streamlined profile keeps the dish tight to the roofline\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned for the INEOS Grenadier (2022–present, all trims) with factory roof rails, and compatible with aftermarket rails as well. It holds the Starlink Mini with or without its original plastic stand. This is the rail-clamp version; if your build uses a modular rack with T-slot or L-Track channels, choose our \u003ca href=\"https:\/\/nvmos.com\/products\/starlink-mini-roof-mount-v2-ineos-grenadier-kickstand\"\u003eStarlink Mini Roof Rack Mount v2 – Universal Roof Rack Fit\u003c\/a\u003e, and for a quick removable option on any steel roof see the \u003ca href=\"https:\/\/nvmos.com\/products\/starlink-mini-magnetic-roof-mount\"\u003eStarlink Mini Magnetic Roof Mount Platform\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDish compatibility\u003c\/td\u003e\n\u003ctd\u003eStarlink Mini (with or without plastic stand)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eINEOS Grenadier (2022–present), factory or aftermarket roof rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAircraft-grade black anodized aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFactory roof rail clamp, tool-free, no drilling or adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKickstand\u003c\/td\u003e\n\u003ctd\u003eIntegrated anti-theft kickstand, locking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeatherproofing\u003c\/td\u003e\n\u003ctd\u003eHigh-altitude, heavy rain, dust, and extreme temperatures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCustom roof rail mount for Starlink Mini (Gen 2)\u003c\/li\u003e\n\u003cli\u003eIntegrated anti-theft kickstand\u003c\/li\u003e\n\u003cli\u003eFull mounting hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit my Grenadier's roof rails?\u003c\/strong\u003e\u003cbr\u003e\nYes. It's purpose-designed for the INEOS Grenadier factory roof rails (2022+, all trims) and clamps on tool-free. It also works with compatible aftermarket rails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's different about the Gen 2 version?\u003c\/strong\u003e\u003cbr\u003e\nGen 2 replaces the weak plastic kickstand supplied with the Starlink Mini with an integrated, locking anti-theft kickstand that holds your chosen angle and deters casual theft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need tools to install or remove it?\u003c\/strong\u003e\u003cbr\u003e\nNo. The clamping mechanism is tool-free for rapid field deployment and removal, with no drilling or adhesive required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a power cable included?\u003c\/strong\u003e\u003cbr\u003e\nNo. The DTP-to-DC power cable is sold separately — pair this mount with our \u003ca href=\"https:\/\/nvmos.com\/products\/starlink-mini-power-cable-dtp-ineos-grenadier\"\u003eStarlink Mini DTP Power Cable\u003c\/a\u003e for a factory-clean rooftop feed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it survive serious weather?\u003c\/strong\u003e\u003cbr\u003e\nIt's built from aircraft-grade anodized aluminum and engineered for high-altitude exposure, heavy rain, dust, and temperature extremes.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024333943087,"sku":"I-WM-SL2","price":109.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-starlink-mini-roof-mount-v2-rail-kickstand-5972113.jpg?v=1774973990"},{"product_id":"hi-lift-jack-mount-ineos-grenadier-rear-ladder","title":"INEOS Grenadier: Ladder-Mounted Hi‑Lift Jack Carrier","description":"\u003cp\u003eCarry your Hi-Lift on the outside of the INEOS Grenadier without giving up the tailgate or the ladder. This carrier clamps a 48-inch Hi-Lift jack to the factory rear ladder using rubber-lined cradles that keep the jack silent on the trail, positioned so the rear door still opens fully and the ladder stays climbable.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePowder-coated steel construction sized specifically for the Grenadier's rear ladder\u003c\/li\u003e\n\u003cli\u003eRubber-lined cradles dampen vibration and protect the jack's finish\u003c\/li\u003e\n\u003cli\u003eCarries a standard 48-inch Hi-Lift jack\u003c\/li\u003e\n\u003cli\u003eFull rear door clearance, so the tailgate opens without interference\u003c\/li\u003e\n\u003cli\u003eLadder remains fully usable with the jack mounted\u003c\/li\u003e\n\u003cli\u003eThree 3-inch clamps and three M8 knobs for quick, tool-light removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits INEOS Grenadier (2023-present) models equipped with the factory rear ladder. It bolts to the ladder tubes with the supplied clamps, so no drilling is needed. The mount pairs naturally with our \u003ca href=\"https:\/\/nvmos.com\/products\/rear-ladder-mounted-accessory-carrier-for-ineos-grenadier-gen2\"\u003eLadder-Mounted Accessory Carrier\u003c\/a\u003e for a fully loaded rear-ladder setup.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePowder-coated steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCradles\u003c\/td\u003e\n\u003ctd\u003eRubber-lined, vibration-damping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJack compatibility\u003c\/td\u003e\n\u003ctd\u003e48-inch Hi-Lift jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting hardware\u003c\/td\u003e\n\u003ctd\u003e3x 3-inch clamps, 3x M8 knobs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount location\u003c\/td\u003e\n\u003ctd\u003eFactory rear ladder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClearance\u003c\/td\u003e\n\u003ctd\u003eFull rear door opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-on, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHi-Lift jack carrier\u003c\/li\u003e\n\u003cli\u003e3x 3-inch versatile mounting clamps\u003c\/li\u003e\n\u003cli\u003e3x M8 knobs\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003cli\u003eNote: Hi-Lift jack sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Hi-Lift jack included?\u003c\/strong\u003e\u003cbr\u003e\nNo. The carrier holds a standard 48-inch Hi-Lift jack, which you purchase separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I still open the rear door?\u003c\/strong\u003e\u003cbr\u003e\nYes. The jack sits clear of the door swing, so the tailgate opens fully without interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I still use the ladder?\u003c\/strong\u003e\u003cbr\u003e\nYes. The ladder stays fully functional with the jack mounted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it attached to the vehicle?\u003c\/strong\u003e\u003cbr\u003e\nThree 3-inch clamps and M8 knobs secure it to the factory rear ladder tubes. It is a bolt-on install with no drilling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it quiet on rough roads?\u003c\/strong\u003e\u003cbr\u003e\nRubber-lined cradles dampen vibration and stop the jack from rattling against the mount over washboard and trail.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024335483183,"sku":"I-HL-3","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-ladder-mounted-hilift-jack-carrier-1168770.jpg?v=1774973993"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/collections\/ineos_grenadier_overlanding_rig.jpg?v=1784328322","url":"https:\/\/nvmos.com\/collections\/ineos-grenadier.oembed?page=5","provider":"NVMOS","version":"1.0","type":"link"}