{"title":"DVA Mechanics","description":"\u003cp\u003eDVA Mechanics builds purpose-designed accessories for the Ineos Grenadier — mounts, carriers, and utility hardware engineered around the platform’s rails and geometry. As Grenadier adoption grows in the States, this catalog grows with it. Pair with \u003ca href=\"\/collections\/goose-gear-ineos-grenadier-solutions\"\u003eGoose Gear’s Grenadier storage\u003c\/a\u003e and see the full \u003ca href=\"\/collections\/ineos-grenadier\"\u003eGrenadier collection\u003c\/a\u003e for the platform picture.\u003c\/p\u003e","products":[{"product_id":"mercedes-sprinter-loadspan-t-load-spreading-roof-rails-with-l-track","title":"Mercedes Sprinter: LoadSpan-T™ (Gen 2) Roof Rails with L-Track \u0026 T-Bolt","description":"\u003cp\u003eThe LoadSpan-T (Gen 2) is a full-length, load-spreading rail system that runs the entire roofline of your Mercedes-Benz Sprinter and distributes weight across the van's factory hard points instead of concentrating it at a few brackets. What sets the Gen 2 apart from the original LoadSpan is its patent-pending DualTrack-T profile: a native L-Track channel and a 25mm T-Slot channel machined side by side into every rail, so you can run L-Track sliders and T-Bolt hardware at the same time from one rail. Machined from anodized 6061-T6 aluminum, it bolts to the Sprinter's OEM roof points with no drilling.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDualTrack-T dual-channel profile: native L-Track plus a parallel 25mm T-Slot, both usable simultaneously with no adapter plates\u003c\/li\u003e\n\u003cli\u003eFull-length, load-spreading design that spans front to back to reduce point stress on the roof\u003c\/li\u003e\n\u003cli\u003eAnodized 6061-T6 aluminum construction for strength and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on to factory roof hard points, fully reversible, no drilling\u003c\/li\u003e\n\u003cli\u003eShips with M8 sliders and butyl sealing tape for a weather-tight install\u003c\/li\u003e\n\u003cli\u003eAccepts standard M6 and M8 hardware in the T-Slot channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the Mercedes-Benz Sprinter on the VS30 chassis (2019 to present). The LSPAN-SPR-144-T is cut for the 144\" wheelbase and the LSPAN-SPR-170-T is cut for the 170\" wheelbase. Both standard-roof and high-roof heights are compatible, as are cargo and passenger models. Not compatible with 2018-and-earlier NCV3 Sprinters. If you want L-Track only without the T-Slot channel, see our \u003ca href=\"https:\/\/nvmos.com\/products\/sprinter-loadspan-roof-rails\"\u003eLoadSpan (Gen 1) Roof Rails\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAnodized 6061-T6 aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003eNative L-Track + 25mm T-Slot (DualTrack-T, patent pending)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e144\" rail length\u003c\/td\u003e\n\u003ctd\u003e113.3 in (287.7 cm), 3.8 kg \/ 8.4 lb per rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e170\" rail length\u003c\/td\u003e\n\u003ctd\u003e158.5 in (402.6 cm), 5.1 kg \/ 11.3 lb per rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoof load capacity\u003c\/td\u003e\n\u003ctd\u003e330 lb dynamic (driving) \/ 661 lb static (parked); limited by the Sprinter roof per the MB operator's manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware compatibility\u003c\/td\u003e\n\u003ctd\u003eM6 and M8 in the T-Slot channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-on to factory points, no drilling, 60–90 min, reversible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLoadSpan-T rails matched to your selected wheelbase\u003c\/li\u003e\n\u003cli\u003eEnd caps for a finished appearance\u003c\/li\u003e\n\u003cli\u003eComplete mounting hardware kit\u003c\/li\u003e\n\u003cli\u003eButyl tape for waterproof sealing\u003c\/li\u003e\n\u003cli\u003e4 x M8 single-hole sliders\u003c\/li\u003e\n\u003cli\u003e4 x M8 four-hole sliders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between LoadSpan-T (Gen 2) and the original LoadSpan (Gen 1)?\u003c\/strong\u003e\u003cbr\u003e\nGen 1 has a single native L-Track channel. Gen 2 (LoadSpan-T) adds a parallel 25mm T-Slot channel alongside the L-Track, so you can mount L-Track accessories and T-Bolt hardware on the same rail at the same time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my Sprinter?\u003c\/strong\u003e\u003cbr\u003e\nIt fits 2019-and-newer VS30 Sprinters in 144\" or 170\" wheelbase, standard or high roof, cargo or passenger. It does not fit 2018-and-older NCV3 Sprinters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I have to drill my roof?\u003c\/strong\u003e\u003cbr\u003e\nNo. The rails bolt directly to the Sprinter's factory roof hard points and the install is fully reversible. Plan on about 60 to 90 minutes with basic hand tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much can it hold?\u003c\/strong\u003e\u003cbr\u003e\nRated to 330 lb dynamic while driving and 661 lb static while parked. That ceiling is set by the Sprinter roof itself, not the rail; the capacity figure includes the weight of the rails and everything mounted to them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I mount to it?\u003c\/strong\u003e\u003cbr\u003e\nAny L-Track accessory plus any T-Bolt hardware. It pairs directly with our \u003ca href=\"https:\/\/nvmos.com\/products\/dualtrack-t-cross-bar-kit-mercedes-sprinter\"\u003eDualTrack-T Cross Bar Kit\u003c\/a\u003e and \u003ca href=\"https:\/\/nvmos.com\/products\/deckspan-universal-roof-panel\"\u003eDeckSpan roof deck panels\u003c\/a\u003e, plus L-Track sliders, tie-down rings, and gear hooks from our \u003ca href=\"https:\/\/nvmos.com\/collections\/adventure-vans\"\u003eSprinter collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Sprinter 144\"","offer_id":56024230658351,"sku":"LSPAN-SPR-144-T","price":349.0,"currency_code":"USD","in_stock":true},{"title":"Sprinter 170\"","offer_id":56024230691119,"sku":"LSPAN-SPR-170-T","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/LoadTrack-T_Loaded_Large_30c97439-e5ed-4e6f-8bf7-eacb1060cd3e.jpg?v=1774973806"},{"product_id":"ineos-grenadier-dtp-06-2s-male-to-2-way-dtp04-2p-u-unbalanced-female-splitter","title":"INEOS Grenadier: DTP-06-2S Male to 2-Way DTP04-2P-U Unbalanced Female Splitter","description":"\u003cp\u003eRun two accessories from a single rooftop power port on your INEOS Grenadier. This splitter plugs a DTP06-2S male connector straight into a factory EXT rooftop outlet and breaks it out into two independent DTP-04-2P female outputs on unequal legs — one short 15 cm tail and one long 100 cm tail. The uneven “unbalanced” leg lengths let you reach an accessory right at the port and a second one a meter away, such as lights positioned over the front and rear doors, without cutting or splicing a single factory wire.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne DTP06-2S male input; two DTP-04-2P female outputs on independent load paths\u003c\/li\u003e\n\u003cli\u003eUnbalanced leg design: one 15 cm leg and one 100 cm leg to reach accessories at different distances from the port\u003c\/li\u003e\n\u003cli\u003eSealed, locking Deutsch DTP connectors rated to IP65 for dust and water-spray resistance\u003c\/li\u003e\n\u003cli\u003ePlug-and-play install with no tools, no crimping, and no cutting — fully reversible\u003c\/li\u003e\n\u003cli\u003eKeeps OEM rooftop wiring completely intact so you preserve factory power connections\u003c\/li\u003e\n\u003cli\u003eFrees up a second accessory feed when your EXT ports are already allocated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2023–present), all trims, including Station Wagon and Quartermaster. It mates with the vehicle's factory rooftop DTP accessory outlets — DVA recommends installing on the EXT2 or EXT3 rooftop ports. It works with any accessory that terminates in a DTP-04-2P male connector, including DVA-style roof-mounted DTP lighting. Combined draw of both accessories must stay within the source EXT port's fuse rating.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connector\u003c\/td\u003e\n\u003ctd\u003eDTP06-2S male (Deutsch DTP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connectors\u003c\/td\u003e\n\u003ctd\u003e2× DTP-04-2P female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeg lengths\u003c\/td\u003e\n\u003ctd\u003e15 cm and 100 cm (unbalanced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (weatherproof, locking connectors)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug \u0026amp; play, no tools, fully reversible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e227 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1× DTP splitter cable — DTP06-2S male to 2× DTP-04-2P female (one 15 cm leg, one 100 cm leg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich DTP splitter do I need — this unbalanced one or the balanced version?\u003c\/strong\u003e\u003cbr\u003e\nChoose this unbalanced splitter when your two accessories sit at different distances from the port — the short 15 cm and long 100 cm legs reach one device close and one farther away, like lights above the front and rear doors. If both accessories sit the same distance from the port, our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-rooftop-power-adapter-dtp06-2s-male-to-2-way-dtp04-2p-splitter\"\u003ebalanced DTP-06-2S to 2-Way DTP04-2P splitter\u003c\/a\u003e uses even-length legs instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to modify any factory wiring to install it?\u003c\/strong\u003e\u003cbr\u003e\nNo. It plugs into an existing rooftop DTP outlet and the accessories plug into it. There is no cutting, splicing, or crimping, and the whole thing unplugs to return the vehicle to stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan both outputs run at the same time?\u003c\/strong\u003e\u003cbr\u003e\nYes, both outputs are live simultaneously. The only limit is the source EXT port's fuse — keep the combined wattage of both accessories within that port's rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connector do my accessories need?\u003c\/strong\u003e\u003cbr\u003e\nEach output is a DTP-04-2P female, so your accessory needs a matching DTP-04-2P male plug. To convert an output to a sealed IP65 or Weather Pack accessory, see our other \u003ca href=\"https:\/\/nvmos.com\/collections\/ineos-grenadier\"\u003eGrenadier DTP power adapters\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it power two roof-mounted side lights?\u003c\/strong\u003e\u003cbr\u003e\nYes — a common use is feeding two DTP side lights from one port. It pairs naturally with our roof-bar-mount \u003ca href=\"https:\/\/nvmos.com\/products\/led-side-light-for-ineos-grenadier-roof-bar-mount-dtp-plug-in\"\u003eDTP plug-in side lights\u003c\/a\u003e.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024244093231,"sku":"I-PWR-2WS-U","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/1UnbalancedSplitterDSC00032-Edit.jpg?v=1774973830"},{"product_id":"ineos-grenadier-front-bumper-light-kit-mount-32-led-light-bar","title":"INEOS Grenadier Front Bumper Light Kit (Mount + 32\" LED Light Bar)","description":"\u003cp\u003eThe Front Bumper Light Kit pairs our steel bumper light mount with a 32-inch Osram-chip LED bar to drop a wide, single-row wash of forward light straight into the INEOS Grenadier's factory bumper opening. It is a true bolt-on that uses existing mounting points, so you gain roughly 8,800 lumens of trail and highway reach without cutting the bumper, drilling plastics, or giving up any approach angle. Everything needed to wire it into the Grenadier's power system ships in the box.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eComplete kit: high-grade steel bumper mount plus a 32\" single-row Osram-chip LED light bar, matched and pre-aligned for the Grenadier\u003c\/li\u003e\n\u003cli\u003e~8,800 combined lumens at roughly 90W total system draw for confident night driving and poor-weather visibility\u003c\/li\u003e\n\u003cli\u003eTrue 100% bolt-on install using factory mounting points — no cutting, no drilling, no trimming of the bumper, grille, or plastics\u003c\/li\u003e\n\u003cli\u003eMount finished in textured black powder coat over high-grade steel; hardware is stainless steel\u003c\/li\u003e\n\u003cli\u003eWeatherproof Deutsch DTP connector with two wiring harnesses included — one for a centralized lighting controller, one for factory under-hood auxiliary power (EXT1 or EXT5)\u003c\/li\u003e\n\u003cli\u003ePreserves radiator airflow, factory crash-bar integrity, and full approach angle — no ground-clearance penalty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eFits the INEOS Grenadier (2023–present). Choose U.S. Fit for the U.S.-spec bumper (amber marker lights, wider center opening) or Euro Fit for the Europe-spec bumper with the narrower center slot. Important: this kit is \u003cstrong\u003enot\u003c\/strong\u003e compatible with the EURO bumper that has an integrated winch. It is otherwise usable with or without a front winch.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCombined output\u003c\/td\u003e\n\u003ctd\u003e~8,800 lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal system power\u003c\/td\u003e\n\u003ctd\u003e~90 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight bar\u003c\/td\u003e\n\u003ctd\u003e32\" single-row, Osram chip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP68 lighting components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eDeutsch DTP (weatherproof)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount material\u003c\/td\u003e\n\u003ctd\u003eHigh-grade steel, textured black powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003e45–60 minutes with basic hand tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit weight\u003c\/td\u003e\n\u003ctd\u003e~15 lb (approx. 6.8 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eINEOS Grenadier 2023–present, U.S. \u0026amp; Euro variants\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFront bumper light bar mount (steel bracket system)\u003c\/li\u003e\n\u003cli\u003e32\" Osram-chip LED bumper bar assembly\u003c\/li\u003e\n\u003cli\u003eVehicle-specific mounting brackets\u003c\/li\u003e\n\u003cli\u003eWiring harness for centralized lighting controller connection\u003c\/li\u003e\n\u003cli\u003eWiring harness for factory under-hood auxiliary power (EXT1\/EXT5)\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware and complete install hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDo I need to cut or drill my bumper to install this kit?\u003c\/strong\u003e\u003cbr\u003eNo. The mount uses existing factory mounting points for a 100% bolt-on install with no cutting, drilling, or trimming of the bumper, grille, or plastics. Most installs take 45–60 minutes with basic hand tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is this different from the 2-light and 3-light kits?\u003c\/strong\u003e\u003cbr\u003eThis kit uses a single 32\" continuous Osram bar for a clean, low-profile face and ~8,800 lumens. The multi-pod versions use Cree 4-chip units instead — step up to our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-kit-mount-3-light-led-bar\"\u003eMount + 3-Light LED Bar kit\u003c\/a\u003e if you want ~13,200 lumens, or see the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-kit-mount-2-light-led-bar\"\u003eMount + 2-Light LED Bar kit\u003c\/a\u003e for a compact two-pod look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it affect my approach angle or radiator airflow?\u003c\/strong\u003e\u003cbr\u003eNo. The bar sits inside the factory bumper opening, so you keep full approach angle, ground clearance, factory crash-bar integrity, and radiator airflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it get power?\u003c\/strong\u003e\u003cbr\u003eTwo harnesses are included: one connects to a centralized lighting controller, and one taps factory under-hood auxiliary power at EXT1 or EXT5. The bar terminates in a weatherproof Deutsch DTP connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the mount?\u003c\/strong\u003e\u003cbr\u003eYes. The mount is sold on its own as our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-bar-clean-factory-integrated-lighting-upgrade\"\u003eFront Bumper Light Mount\u003c\/a\u003e, and the bar is available separately as the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-32-led-light-bar\"\u003e32\" LED Light Bar\u003c\/a\u003e.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"U.S. Fit","offer_id":56024245469487,"sku":"I-LB-FK-U32","price":599.0,"currency_code":"USD","in_stock":true},{"title":"Euro Fit","offer_id":56024245502255,"sku":"I-LB-FK-E32","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/DSC00005.jpg?v=1774973833"},{"product_id":"ineos-grenadier-front-bumper-light-kit-mount-2-light-led-bar","title":"INEOS Grenadier Front Bumper Light Kit (Mount + 2-Light LED Bar)","description":"\u003cp\u003eThis Front Bumper Light Kit combines our steel bumper light mount with a two-pod Cree LED bar to add clean, high-output forward lighting to the INEOS Grenadier. Two 4-chip Cree units put out roughly 8,800 lumens at about 80W, mounted low and centered in the factory bumper opening for an OEM-grade look. It bolts on with existing hardware, so there is no cutting, drilling, or loss of approach angle.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eComplete kit: high-grade steel bumper mount plus a 2-light Cree LED bar, sized and centered for the Grenadier's bumper opening\u003c\/li\u003e\n\u003cli\u003eTwo Cree 4-chip units rated 40W each — ~80W total and ~8,800 combined lumens of controlled forward throw\u003c\/li\u003e\n\u003cli\u003e100% bolt-on using factory mounting points; no trimming of the bumper, grille, or plastics and no drilling\u003c\/li\u003e\n\u003cli\u003eMount built from high-grade steel with a textured black powder coat; stainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eIP68-rated lighting components with a weatherproof Deutsch DTP connector\u003c\/li\u003e\n\u003cli\u003eIncludes both a centralized-controller harness and a factory under-hood auxiliary-power harness for flexible wiring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eFits the INEOS Grenadier (2023–present). U.S. Fit suits the U.S.-spec bumper with amber marker lights and the wider center opening; Euro Fit is engineered for the Europe-spec bumper with the narrower center slot. This kit is \u003cstrong\u003enot\u003c\/strong\u003e compatible with the EURO bumper that includes an integrated winch, but works with or without a standard front winch.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCombined output\u003c\/td\u003e\n\u003ctd\u003e~8,800 lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal system power\u003c\/td\u003e\n\u003ctd\u003e~80 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLights\u003c\/td\u003e\n\u003ctd\u003e2 × Cree 4-chip units, 40W each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP68 lighting components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eDeutsch DTP (weatherproof)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount material\u003c\/td\u003e\n\u003ctd\u003eHigh-grade steel, textured black powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003e45–60 minutes with basic hand tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eINEOS Grenadier 2023–present, U.S. \u0026amp; Euro variants\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFront bumper light bar mount (steel bracket system)\u003c\/li\u003e\n\u003cli\u003e2-light Cree LED bumper bar assembly\u003c\/li\u003e\n\u003cli\u003eVehicle-specific mounting brackets\u003c\/li\u003e\n\u003cli\u003eWiring harness for centralized lighting controller connection\u003c\/li\u003e\n\u003cli\u003eWiring harness for factory under-hood auxiliary power\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware and complete install hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow much light does the 2-light kit produce?\u003c\/strong\u003e\u003cbr\u003eTwo Cree 4-chip units rated 40W each deliver about 80W of draw and roughly 8,800 combined lumens — enough for confident night and poor-weather driving without the size of a full bar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I choose the 2-light or 3-light kit?\u003c\/strong\u003e\u003cbr\u003eThe 2-light kit is the compact option at ~8,800 lumens. If you want more reach, our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-kit-mount-3-light-led-bar\"\u003eMount + 3-Light LED Bar kit\u003c\/a\u003e steps up to three pods, ~13,200 lumens, and ~110W. Prefer a continuous bar? See the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-kit-mount-32-led-light-bar\"\u003eMount + 32\" LED Bar kit\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require cutting or drilling?\u003c\/strong\u003e\u003cbr\u003eNo. It is a 100% bolt-on install using factory mounting points, with no trimming of the bumper, grille, or plastics and no loss of approach angle or radiator airflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it powered?\u003c\/strong\u003e\u003cbr\u003eBoth wiring harnesses are included — one for a centralized lighting controller and one for factory under-hood auxiliary power — terminating in a weatherproof Deutsch DTP connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I add the light bar to a mount I already own?\u003c\/strong\u003e\u003cbr\u003eYes. The two-pod bar is sold on its own as our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-2-light-set\"\u003eFront Bumper 2-Light Set\u003c\/a\u003e for use with the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-bar-clean-factory-integrated-lighting-upgrade\"\u003eFront Bumper Light Mount\u003c\/a\u003e.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"U.S. Fit","offer_id":56024247697711,"sku":"I-LB-FK-U2","price":599.0,"currency_code":"USD","in_stock":true},{"title":"Euro Fit","offer_id":56024247730479,"sku":"I-LB-FK-E2","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/DSC00252-HDRLarge.jpg?v=1774973837"},{"product_id":"dualtrack-t-cross-bar-kit-mercedes-sprinter","title":"Mercedes Sprinter: DualTrack-T™ Cross Bar Rail Kit with L-Track \u0026 T-Bolt","description":"\u003cp\u003eThe DualTrack-T Cross Bar Kit gives your Mercedes-Benz Sprinter two full-width load bars that carry L-Track sliders and 25mm T-Slot hardware at the same time, so you never have to commit to one mounting standard. Each bar is extruded from high-grade aluminum with a black powder-coat finish and a curved-edge profile that deflects airflow to cut wind noise at highway speed. The bars bolt on with basic hand tools and mount to our LoadSpan rails, factory OEM rails, or most aftermarket Sprinter rails.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePatent-pending dual-channel profile: L-Track and 25mm T-Slot run in parallel, both usable at once\u003c\/li\u003e\n\u003cli\u003eCurved-edge aerodynamic profile engineered to reduce wind noise on daily-driven Sprinters\u003c\/li\u003e\n\u003cli\u003eHigh-grade powder-coated aluminum for structural strength without excess weight\u003c\/li\u003e\n\u003cli\u003eLow 1\" profile height keeps the bars close to the roofline\u003c\/li\u003e\n\u003cli\u003eNo-drill, bolt-on install; roughly 30 minutes per rail and fully reversible\u003c\/li\u003e\n\u003cli\u003eMounts to DVA LoadSpan rails, OEM Sprinter rails, or other aftermarket roof rails\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits Mercedes-Benz Sprinter vans equipped with longitudinal roof rails, in both high-roof and low-roof configurations. It bolts directly to our \u003ca href=\"https:\/\/nvmos.com\/products\/mercedes-sprinter-loadspan-t-load-spreading-roof-rails-with-l-track\"\u003eLoadSpan-T (Gen 2)\u003c\/a\u003e and \u003ca href=\"https:\/\/nvmos.com\/products\/sprinter-loadspan-roof-rails\"\u003eLoadSpan (Gen 1)\u003c\/a\u003e rails. If you are mounting to factory OEM longitudinal rails, you'll also want the \u003ca href=\"https:\/\/nvmos.com\/products\/mercedes-sprinter-oem-mounting-kit-for-dualtrack-t-crossbar-roof-rails\"\u003eT-Bolt Mounting Kit\u003c\/a\u003e, which supplies the OEM-channel hardware; the standard mounting hardware in this kit covers LoadSpan and most aftermarket rails.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial \/ finish\u003c\/td\u003e\n\u003ctd\u003eHigh-grade powder-coated aluminum, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrossbar length\u003c\/td\u003e\n\u003ctd\u003e61.75 in (156.8 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile\u003c\/td\u003e\n\u003ctd\u003e3 in (76 mm) wide x 1 in (25 mm) high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight per bar\u003c\/td\u003e\n\u003ctd\u003e8.5 lb including mounts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003eL-Track + 25mm T-Slot (DualTrack-T, patent pending)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad capacity (2-bar kit)\u003c\/td\u003e\n\u003ctd\u003e300 lb static \/ 150 lb dynamic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo-drill bolt-on, ~30 min per rail, reversible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 x DualTrack-T cross bar rails\u003c\/li\u003e\n\u003cli\u003eComplete mounting hardware kit\u003c\/li\u003e\n\u003cli\u003eOnline installation video guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use L-Track and T-Bolt accessories at the same time?\u003c\/strong\u003e\u003cbr\u003e\nYes. The DualTrack-T profile runs an L-Track channel and a 25mm T-Slot channel side by side down the full length of each bar, so you can mount L-Track sliders, T-Slot hardware, or both at once with no adapter plates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does it mount to?\u003c\/strong\u003e\u003cbr\u003e\nOur LoadSpan and LoadSpan-T rails, factory OEM Sprinter longitudinal rails, or most aftermarket Sprinter roof rails. For OEM factory rails, add the T-Bolt Mounting Kit for the correct channel hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can two bars carry?\u003c\/strong\u003e\u003cbr\u003e\nThe 2-bar kit is rated to 300 lb static (parked) and 150 lb dynamic (while driving).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the bars make wind noise?\u003c\/strong\u003e\u003cbr\u003e\nThe curved-edge profile is shaped to deflect airflow and reduce whistle at highway speed, which matters on a Sprinter that gets driven every day rather than only on weekends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs drilling required?\u003c\/strong\u003e\u003cbr\u003e\nNo. It's a no-drill bolt-on install taking about 30 minutes per rail with basic hand tools, and it's fully reversible.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024249729327,"sku":"DT-T-SPR-KIT","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/6_DSC00033_Large_8a06f5f0-d17f-4e64-8aaa-a4276c1fbec7.jpg?v=1774973840"},{"product_id":"ineos-grenadier-front-bumper-32-led-light-bar","title":"INEOS Grenadier: Front Bumper 32\" LED Light Bar","description":"\u003cp\u003eOur Front Bumper 32-inch LED Light Bar is a single-row, Osram-chip bar engineered specifically to sit inside the INEOS Grenadier's front bumper opening. It puts out 8,800 raw lumens from a combo spot-and-flood beam in an aluminum housing, delivering long-range reach with controlled spill for trail and highway use. This is the bar only — it bolts to our Front Bumper Light Mount for a centered, factory-clean install with no cutting or drilling.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e32\" (813 mm) single-row bar with Osram chips — engineered for the Grenadier, not adapted from a generic SKU\u003c\/li\u003e\n\u003cli\u003e8,800 raw lumens at 90W (12V, ~7.5A) with a combo spot + flood beam for both distance and foreground coverage\u003c\/li\u003e\n\u003cli\u003eIndividual reflector optics per LED for focused throw and controlled spill\u003c\/li\u003e\n\u003cli\u003eAluminum housing rated IP67 for all-weather durability\u003c\/li\u003e\n\u003cli\u003eWeatherproof, field-serviceable Deutsch DTP connector\u003c\/li\u003e\n\u003cli\u003eTrue bolt-on — wiring routes through existing chassis pathways with no cutting, drilling, or permanent modification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned for the INEOS Grenadier (2023–present). This is the light bar only and \u003cstrong\u003erequires the Front Bumper Light Mount\u003c\/strong\u003e (sold separately) to install. It wires to factory under-hood auxiliary power at EXT1 or EXT5, or to a centralized lighting controller.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRaw lumens\u003c\/td\u003e\n\u003ctd\u003e8,800 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower draw\u003c\/td\u003e\n\u003ctd\u003e90 W (12 V, ~7.5 A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e32\" \/ 813 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED configuration\u003c\/td\u003e\n\u003ctd\u003eSingle-row, Osram chip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam pattern\u003c\/td\u003e\n\u003ctd\u003eCombo (spot + flood)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptics\u003c\/td\u003e\n\u003ctd\u003eIndividual reflector per LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eDeutsch DTP (weatherproof, field-serviceable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003e~60 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e32\" single-row LED light bar\u003c\/li\u003e\n\u003cli\u003eWiring harness for factory EXT1\/EXT5 auxiliary connection\u003c\/li\u003e\n\u003cli\u003eWiring harness for aftermarket controller integration\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDo I need anything else to install this bar?\u003c\/strong\u003e\u003cbr\u003eYes. This is the bar only. It mounts to our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-bar-clean-factory-integrated-lighting-upgrade\"\u003eFront Bumper Light Mount\u003c\/a\u003e, which is sold separately. If you want both together, buy the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-kit-mount-32-led-light-bar\"\u003eMount + 32\" LED Bar kit\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat kind of beam does it throw?\u003c\/strong\u003e\u003cbr\u003eIt uses a combo spot + flood pattern with individual reflector optics on each LED, giving you long-range throw down the trail plus controlled foreground spill from a single 32\" bar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it wired?\u003c\/strong\u003e\u003cbr\u003eTwo harnesses are included: one for factory under-hood auxiliary power at EXT1 or EXT5, and one for an aftermarket centralized controller. Wiring routes through existing chassis pathways and terminates in a field-serviceable Deutsch DTP connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it weatherproof?\u003c\/strong\u003e\u003cbr\u003eYes. The aluminum housing is rated IP67, and the Deutsch DTP connector is weatherproof and field-serviceable for reliable use in rain, dust, and snow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs an amber version available?\u003c\/strong\u003e\u003cbr\u003eYes — a yellow\/amber 32\" bar is offered as our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-32-led-light-bar-yellow\"\u003eFront Bumper 32\" LED Light Bar - Yellow\u003c\/a\u003e for better cut-through in fog and dust.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024251531567,"sku":"I-LP-32B","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/DSC00005_8a27165a-99f8-470c-939e-5d1bb6643079.jpg?v=1774973843"},{"product_id":"ineos-grenadier-front-bumper-2-light-set","title":"INEOS Grenadier: Front Bumper 2-Light Set","description":"\u003cp\u003eThe INEOS Grenadier Front Bumper 2-Light Set adds roughly 8,800 combined lumens of focused forward light to your Grenadier without the bulk of a full-width bar. Two compact Cree 4-chip pods bolt to the DVA front bumper mount and plug straight into the truck's factory power, giving you serious night and trail visibility while keeping the front end looking OEM. It is purpose-built for the Grenadier's bumper opening, so there are no universal brackets and no misalignment.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo Cree 4-chip LED pods, ~40W each, for ~80W and ~8,800 lumens of combined forward output\u003c\/li\u003e\n\u003cli\u003eIP68-rated housings sealed against water, dust, and pressure washing\u003c\/li\u003e\n\u003cli\u003ePlug-and-play DTP connector wiring — two harnesses included, one for a direct factory auxiliary connection and one for an aftermarket lighting controller\u003c\/li\u003e\n\u003cli\u003eCompact twin-pod layout delivers concentrated throw without the visual mass of a full light bar\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for the Grenadier's bumper opening and the DVA bumper light mount for a centered, factory-clean face\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2023–present). This is the light set only — it requires the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-bar-clean-factory-integrated-lighting-upgrade\"\u003eGrenadier Front Bumper Light Mount\u003c\/a\u003e, sold separately, to install. If you would rather buy both together, we also offer the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-kit-mount-2-light-led-bar\"\u003ecomplete Mount + 2-Light kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight count\u003c\/td\u003e\n\u003ctd\u003e2-pod LED set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED type\u003c\/td\u003e\n\u003ctd\u003eCree 4-chip units\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower per light\u003c\/td\u003e\n\u003ctd\u003e~40W (4 chips x 10W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal system power\u003c\/td\u003e\n\u003ctd\u003e~80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCombined output\u003c\/td\u003e\n\u003ctd\u003e~8,800 lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeather rating\u003c\/td\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eDTP plug-in (wiring included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRequired mount\u003c\/td\u003e\n\u003ctd\u003eDVA Front Bumper Light Mount (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eINEOS Grenadier (2023–present)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2-light Cree LED bumper bar assembly\u003c\/li\u003e\n\u003cli\u003eLighting-controller connection harness\u003c\/li\u003e\n\u003cli\u003eDirect factory auxiliary power harness\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need anything else to install this light set?\u003c\/strong\u003e\u003cbr\u003e\nYes. This is the 2-light set only. It mounts to the DVA Front Bumper Light Mount, which is sold separately. If you do not already own the mount, order it alongside this set or buy the complete Mount + 2-Light kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow bright is the 2-light set?\u003c\/strong\u003e\u003cbr\u003e\nEach Cree 4-chip pod draws about 40W, for roughly 80W and about 8,800 combined lumens of controlled forward illumination — enough for confident night driving, trail use, and poor-weather visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I have to cut or drill my bumper?\u003c\/strong\u003e\u003cbr\u003e\nNo. The set plugs into the vehicle with an included DTP harness and bolts to the DVA mount, which uses factory mounting points. No cutting, drilling, or splicing is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I run these with an aftermarket light controller?\u003c\/strong\u003e\u003cbr\u003e\nYes. Two harnesses are included — one for a direct factory auxiliary connection and one for integration with a centralized aftermarket lighting controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it weatherproof enough for overlanding?\u003c\/strong\u003e\u003cbr\u003e\nThe pods carry an IP68 rating, sealing them against dust, submersion, and high-pressure water, so they hold up to trail, weather, and wash-down use.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024253301039,"sku":"I-LP-2B","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/DSC00210-HDRLarge_2d2a279e-d65f-4ec8-9429-e07239f83f86.jpg?v=1774973847"},{"product_id":"under-seat-fire-extinguisher-mount-for-ineos-grenadier-passenger-side","title":"INEOS Grenadier: Under-Seat Fire Extinguisher Mount","description":"\u003cp\u003eKeep a fire extinguisher within arm's reach and completely out of the way with this under-seat mount built specifically for the INEOS Grenadier's passenger seat. It anchors to the factory under-seat bolts, so there's no drilling or cutting, and a quick-release lever puts the bottle in your hand with one motion when seconds matter. Precision-machined aluminum keeps it light and corrosion-resistant for a lifetime of trail and daily use.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision-engineered aluminum bracket with a corrosion-resistant black coating\u003c\/li\u003e\n\u003cli\u003eNo-drill installation using the Grenadier's existing passenger-side under-seat bolts\u003c\/li\u003e\n\u003cli\u003eQuick-release lever with a red anodized knob for fast, one-handed deployment\u003c\/li\u003e\n\u003cli\u003eAdjustable cradle holds most compact fire extinguishers securely\u003c\/li\u003e\n\u003cli\u003eLow-profile design tucks under the seat without stealing legroom or blocking seat adjustment\u003c\/li\u003e\n\u003cli\u003eLight at roughly 2 lbs (907 g), so it adds security without adding bulk\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned for the INEOS Grenadier and mounts on the passenger side using factory under-seat hardware. Compatible with both left-hand-drive and right-hand-drive Grenadiers. The fire extinguisher itself is sold separately.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePrecision-engineered aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCorrosion-resistant black coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApproximately 2 lbs (907 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting location\u003c\/td\u003e\n\u003ctd\u003eUnder passenger seat, factory bolt points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo-drill, bolt-on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelease\u003c\/td\u003e\n\u003ctd\u003eQuick-release lever, red anodized knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive compatibility\u003c\/td\u003e\n\u003ctd\u003eLHD and RHD Grenadier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x under-seat fire extinguisher bracket\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes installing this require drilling into my Grenadier?\u003c\/strong\u003e\u003cbr\u003e\nNo. The bracket uses the existing under-seat bolts on the passenger side, so there is no drilling, cutting, or permanent modification to your interior.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a fire extinguisher included?\u003c\/strong\u003e\u003cbr\u003e\nNo, the extinguisher is sold separately. The adjustable cradle is sized to hold most compact automotive fire extinguishers securely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit a right-hand-drive Grenadier?\u003c\/strong\u003e\u003cbr\u003e\nYes. The mount is compatible with both LHD and RHD Grenadiers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it get in the way of the passenger seat or legroom?\u003c\/strong\u003e\u003cbr\u003e\nNo. The low-profile design tucks the extinguisher under the seat so it does not interfere with legroom, floor mats, or seat adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow fast can I get to the extinguisher in an emergency?\u003c\/strong\u003e\u003cbr\u003e\nThe quick-release lever with its red anodized knob is built for one-handed access, letting you pull the bottle free in a single motion.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024256217391,"sku":"I-MT-FE","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/under-seat-fire-extinguisher-mount-for-ineos-grenadier-1246192.jpg?v=1774973853"},{"product_id":"amber-yellow-snap-on-light-covers-ineos-grenadier-3-light-bumper-bar-set-of-3","title":"Amber \/ Yellow Snap-On Light Covers – INEOS Grenadier 3-Light Bumper Bar (Set of 3)","description":"\u003cp\u003eThese amber\/yellow snap-on covers slip over the three pods of the INEOS Grenadier front bumper 3-light bar to cut glare and backscatter in fog, rain, dust, and snow. Molded from impact-resistant, UV-stable polycarbonate, they press on and pull off in seconds with no tools, adhesives, or hardware — so you can switch between white and amber output as conditions change. Sold as a complete set of three.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAmber\/yellow filter reduces glare and backscatter in fog, rain, dust, and snow for clearer adverse-weather visibility\u003c\/li\u003e\n\u003cli\u003eImpact-resistant, UV-stable polycarbonate with a smooth, high-clarity molded lens\u003c\/li\u003e\n\u003cli\u003eTool-free snap-on design — align to the light face, press until seated, and pull off just as easily\u003c\/li\u003e\n\u003cli\u003eSet of three, one cover per pod — a complete match for the 3-light bar\u003c\/li\u003e\n\u003cli\u003ePurpose-molded fit that keeps the Grenadier's clean, factory-plus look\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned exclusively for the DVA-engineered INEOS Grenadier Front Bumper 3-Light LED Bar sold on NVMOS. They are not compatible with other light brands, roof-mounted bars, single-pod setups, or the 32\" single-row bar. Covers only — lights, bumper bar, and vehicle are not included.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eImpact-resistant, UV-stable polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eAmber \/ yellow (selective filter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eSet of 3 (one per pod)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eTool-free snap-on \/ snap-off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eGrenadier front bumper 3-light LED bar only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e3 × amber\/yellow snap-on light covers\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhich light do these covers fit?\u003c\/strong\u003e\u003cbr\u003eThey are molded specifically for our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-3-light-bar\"\u003eFront Bumper 3-Light Bar\u003c\/a\u003e (also included in the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-kit-mount-3-light-led-bar\"\u003eMount + 3-Light LED Bar kit\u003c\/a\u003e). They do not fit the 32\" single-row bar, other brands, or pod lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the covers include the lights or bumper bar?\u003c\/strong\u003e\u003cbr\u003eNo. This is a covers-only set of three. The LED lights, bumper bar, and vehicle are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need tools to install them?\u003c\/strong\u003e\u003cbr\u003eNo. They snap on and off by hand — align each cover to the light face and press until seated. No tools, adhesives, or hardware are required, so you can swap them on and off as weather changes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose amber over white?\u003c\/strong\u003e\u003cbr\u003eAmber\/yellow light scatters less off airborne particles, so it reduces glare and backscatter in fog, rain, dust, and snow — often improving what you can actually see in those conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre they durable enough for trail use?\u003c\/strong\u003e\u003cbr\u003eYes. They are molded from impact-resistant, UV-stable polycarbonate built to handle trail debris, weather exposure, and repeated on\/off use.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024261722415,"sku":"I-LP-3CA","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/amber-yellow-snap-on-light-covers-ineos-grenadier-3-light-bumper-bar-set-of-3-7824565.jpg?v=1774973862"},{"product_id":"sprinter-loadspan-roof-rails","title":"Mercedes Sprinter: LoadSpan™ (Gen 1) Roof Rails with L-Track","description":"\u003cp\u003eThe LoadSpan (Gen 1) is a full-length, load-spreading rail system for the Mercedes-Benz Sprinter that runs the whole roofline and distributes weight across the van's factory hard points rather than loading a handful of feet. Each rail is extruded from anodized 6061-T6 aluminum with a native L-Track channel milled the full length, giving you continuous, industry-standard accessory mounting from front to back. DVA's deflection testing puts it at roughly 6.2 times stiffer than a compliant OEM-style rail over a 50\" span under a 175 lbf center load, which keeps force spread out instead of bending into the roof at one point.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated full-length native L-Track channel for universal accessory mounting anywhere along the rail\u003c\/li\u003e\n\u003cli\u003eLoad-spreading design that carries weight across the entire roofline, not just at the brackets\u003c\/li\u003e\n\u003cli\u003eRoughly 6.2x stiffer than a compliant OEM-style rail in a 50\" span \/ 175 lbf deflection test\u003c\/li\u003e\n\u003cli\u003eAnodized 6061-T6 extruded aluminum for strength and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eBolt-on to factory hard points, no drilling, fully reversible\u003c\/li\u003e\n\u003cli\u003eIncludes stainless hardware, butyl sealing tape, and eight M8 sliders to get you mounting immediately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the 2019-and-newer VS30 Mercedes-Benz Sprinter in all three wheelbases: LSPAN-SPR-144 for 144\", LSPAN-SPR-170 for 170\", and LSPAN-SPR-170EXT for the 170\" Extended. Standard, high, and super-high roof heights are all compatible. Earlier 2007–2018 NCV3 Sprinters are not a bolt-on fit and would require drilling. Want to run T-Bolt hardware alongside L-Track? Step up to the \u003ca href=\"https:\/\/nvmos.com\/products\/mercedes-sprinter-loadspan-t-load-spreading-roof-rails-with-l-track\"\u003eLoadSpan-T (Gen 2)\u003c\/a\u003e, which adds a parallel 25mm T-Slot channel.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAnodized 6061-T6 extruded aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel\u003c\/td\u003e\n\u003ctd\u003eIntegrated full-length native L-Track (L-Track only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e144\" rail length\u003c\/td\u003e\n\u003ctd\u003e113.3 in, 8.4 lb \/ 3.8 kg per rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e170\" rail length\u003c\/td\u003e\n\u003ctd\u003e158.5 in (402.6 cm), 11.3 lb \/ 5.1 kg per rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e170\" Extended rail length\u003c\/td\u003e\n\u003ctd\u003e173.5 in (440.6 cm), 12.3 lb \/ 5.6 kg per rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoof load capacity\u003c\/td\u003e\n\u003ctd\u003e331 lb dynamic (driving) \/ 661 lb static (parked); limited by the Sprinter roof, not the rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-on to factory hard points, no drilling, 60–90 min, reversible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 x LoadSpan rails cut to your selected length\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware kit with bolts, washers, and self-locking nuts\u003c\/li\u003e\n\u003cli\u003eButyl sealing tape\u003c\/li\u003e\n\u003cli\u003e8 x M8 sliders (4 single-hole + 4 four-hole)\u003c\/li\u003e\n\u003cli\u003eOEM-style end caps\u003c\/li\u003e\n\u003cli\u003eInstallation guide with torque specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Gen 1 LoadSpan have a T-Bolt channel?\u003c\/strong\u003e\u003cbr\u003e\nNo. Gen 1 has a single native L-Track channel only. If you need L-Track and 25mm T-Slot hardware to run at the same time, choose the LoadSpan-T (Gen 2).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich SKU fits my van?\u003c\/strong\u003e\u003cbr\u003e\nMatch it to your wheelbase: LSPAN-SPR-144 for the 144\", LSPAN-SPR-170 for the 170\", and LSPAN-SPR-170EXT for the 170\" Extended. All 2019+ VS30 roof heights are covered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow stiff is it compared to factory rails?\u003c\/strong\u003e\u003cbr\u003e\nIn DVA's deflection analysis over a 50\" span with a 175 lbf center load, LoadSpan measured about 6.2 times stiffer than a compliant OEM-style rail, so it deflects less and spreads load rather than concentrating it at one point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to drill?\u003c\/strong\u003e\u003cbr\u003e\nNo. It bolts to the Sprinter's factory hard points and is fully reversible, though you'll need interior roof access to tighten the nuts. Budget 60 to 90 minutes solo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I mount to it?\u003c\/strong\u003e\u003cbr\u003e\nAny L-Track accessory. It works with our \u003ca href=\"https:\/\/nvmos.com\/products\/dualtrack-t-cross-bar-kit-mercedes-sprinter\"\u003eDualTrack-T Cross Bar Kit\u003c\/a\u003e and with L-Track sliders, tie-down rings, and gear hooks from our \u003ca href=\"https:\/\/nvmos.com\/collections\/adventure-vans\"\u003eSprinter collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Sprinter 144\"","offer_id":56024263950639,"sku":"LSPAN-SPR-144","price":299.0,"currency_code":"USD","in_stock":true},{"title":"Sprinter 170\"","offer_id":56024263983407,"sku":"LSPAN-SPR-170","price":299.0,"currency_code":"USD","in_stock":true},{"title":"Sprinter 170\" Extended","offer_id":56024264016175,"sku":"LSPAN-SPR-170EXT","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/DSC00024_6729d31d-944d-47a8-842a-6502bbaf8832.jpg?v=1774973866"},{"product_id":"ineos-grenadier-front-bumper-light-kit-mount-3-light-led-bar","title":"INEOS Grenadier Front Bumper Light Kit (Mount + 3-Light LED Bar)","description":"\u003cp\u003eThe Front Bumper Light Kit with 3-Light LED Bar is our highest-output bumper lighting setup for the INEOS Grenadier, pairing the steel bumper mount with three Cree 4-chip pods. Together they produce roughly 13,200 lumens at about 110W, centered in the factory bumper opening for serious night-driving and trail reach with an OEM-clean face. It bolts on using existing mounting points — no bumper mods, no drilling, and no approach-angle penalty.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eComplete kit: high-grade steel bumper mount plus a 3-light Cree LED bar, matched and centered for the Grenadier\u003c\/li\u003e\n\u003cli\u003eThree Cree 4-chip units rated 40W each — ~110W total and ~13,200 combined lumens, the most output in our bumper lineup\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no bumper mods, no drilling, and zero approach-angle loss\u003c\/li\u003e\n\u003cli\u003eMount built from high-grade steel with a textured black powder coat; stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eIP68-rated lighting components with a weatherproof Deutsch DTP connector\u003c\/li\u003e\n\u003cli\u003eBoth wiring harnesses included — centralized lighting controller and factory under-hood auxiliary power\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eFits the INEOS Grenadier (2023–present). U.S. Fit is designed for the U.S.-spec bumper with amber marker lights and the wider center opening; Euro Fit is engineered for the Europe-spec bumper with the narrower center slot. This kit is \u003cstrong\u003enot\u003c\/strong\u003e compatible with the EURO bumper that has an integrated winch. Amber\/yellow snap-on covers are sold separately.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCombined output\u003c\/td\u003e\n\u003ctd\u003e~13,200 lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal system power\u003c\/td\u003e\n\u003ctd\u003e~110 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLights\u003c\/td\u003e\n\u003ctd\u003e3 × Cree 4-chip units, 40W each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP68 lighting components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eDeutsch DTP (weatherproof)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount material\u003c\/td\u003e\n\u003ctd\u003eHigh-grade steel, textured black powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003e45–60 minutes with basic hand tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eINEOS Grenadier 2023–present, U.S. \u0026amp; Euro variants\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFront bumper light bar mount (steel bracket system)\u003c\/li\u003e\n\u003cli\u003e3-light Cree LED bumper bar assembly\u003c\/li\u003e\n\u003cli\u003eVehicle-specific mounting brackets\u003c\/li\u003e\n\u003cli\u003eWiring harness for centralized lighting controller connection\u003c\/li\u003e\n\u003cli\u003eWiring harness for factory under-hood auxiliary power\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware and complete install hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow much brighter is the 3-light kit than the others?\u003c\/strong\u003e\u003cbr\u003eThe 3-light kit delivers ~13,200 lumens at ~110W — noticeably more than the ~8,800 lumens of both the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-kit-mount-2-light-led-bar\"\u003e2-light kit\u003c\/a\u003e and the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-kit-mount-32-led-light-bar\"\u003e32\" single-row kit\u003c\/a\u003e. Choose it when you want maximum forward output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installing it require cutting my bumper?\u003c\/strong\u003e\u003cbr\u003eNo. It mounts to existing factory points for a bolt-on install with no bumper mods, no drilling, and no loss of approach angle or radiator airflow. Plan on 45–60 minutes with basic hand tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it powered?\u003c\/strong\u003e\u003cbr\u003eTwo harnesses ship in the box: one for a centralized lighting controller and one for factory under-hood auxiliary power. The bar terminates in a weatherproof Deutsch DTP connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I run amber covers on this kit?\u003c\/strong\u003e\u003cbr\u003eYes. Our \u003ca href=\"https:\/\/nvmos.com\/products\/amber-yellow-snap-on-light-covers-ineos-grenadier-3-light-bumper-bar-set-of-3\"\u003eamber\/yellow snap-on covers (set of 3)\u003c\/a\u003e are made for this exact 3-light bar and cut glare in fog, dust, and snow. They are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the 3-light bar?\u003c\/strong\u003e\u003cbr\u003eYes. The three-pod bar is available on its own as our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-3-light-bar\"\u003eFront Bumper 3-Light Bar\u003c\/a\u003e for use with the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-bar-clean-factory-integrated-lighting-upgrade\"\u003eFront Bumper Light Mount\u003c\/a\u003e.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"U.S. Fit","offer_id":56024266572079,"sku":"I-LB-FK-U","price":699.0,"currency_code":"USD","in_stock":true},{"title":"Euro Fit","offer_id":56024266604847,"sku":"I-LB-FK-E","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/3-light.jpg?v=1774973875"},{"product_id":"ineos-grenadier-front-bumper-3-light-bar","title":"INEOS Grenadier: Front Bumper 3-Light Bar","description":"\u003cp\u003eOur Front Bumper 3-Light Bar adds serious forward output to the INEOS Grenadier without a universal-bracket look. Three Cree 4-chip pods deliver roughly 13,200 lumens at about 110W, purpose-built to sit centered in the factory bumper opening. This is the light bar only — it bolts directly to our Front Bumper Light Mount for a clean, factory-grade install with no cutting and no drilling.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThree Cree 4-chip LED pods rated 40W each — ~110W total and ~13,200 combined lumens\u003c\/li\u003e\n\u003cli\u003eFactory-clean integration: designed for the Grenadier and the DVA bumper mount, so there are no universal brackets or misalignment\u003c\/li\u003e\n\u003cli\u003eIP68 weather rating for confident use in rain, dust, and snow\u003c\/li\u003e\n\u003cli\u003eDTP plug-in wiring included, with two options: centralized lighting controller or direct factory under-hood auxiliary power\u003c\/li\u003e\n\u003cli\u003eTrue bolt-on — no cutting, no drilling\u003c\/li\u003e\n\u003cli\u003eApproximately 9 lb (4.08 kg) bar assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned for the INEOS Grenadier (2023–present). This is the 3-light bar only and \u003cstrong\u003erequires the Front Bumper Light Mount\u003c\/strong\u003e (sold separately), available in U.S. and Euro bumper variants. Prefer a single continuous bar instead of three pods? See our 32\" single-row option.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCombined output\u003c\/td\u003e\n\u003ctd\u003e~13,200 lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal system power\u003c\/td\u003e\n\u003ctd\u003e~110 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e3 × Cree 4-chip pods, 40W each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eDeutsch DTP plug-in (wiring included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~9 lb (approx. 4.08 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount\u003c\/td\u003e\n\u003ctd\u003eRequires Front Bumper Light Mount (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3-light LED bumper bar assembly\u003c\/li\u003e\n\u003cli\u003eWiring harness for centralized lighting controller connection\u003c\/li\u003e\n\u003cli\u003eWiring harness for direct factory under-hood auxiliary power\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes this include the bumper mount?\u003c\/strong\u003e\u003cbr\u003eNo. This is the 3-light bar only. It bolts to our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-bar-clean-factory-integrated-lighting-upgrade\"\u003eFront Bumper Light Mount\u003c\/a\u003e, sold separately. To get both together, buy the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-light-kit-mount-3-light-led-bar\"\u003eMount + 3-Light LED Bar kit\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much light does it put out?\u003c\/strong\u003e\u003cbr\u003eThree Cree 4-chip pods at 40W each produce about 110W of draw and roughly 13,200 combined lumens — our brightest bumper bar for night driving, trail use, and poor-weather visibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it wire up?\u003c\/strong\u003e\u003cbr\u003eWiring is included with a DTP plug-in. You can run it through a centralized lighting controller or connect directly to factory under-hood auxiliary power without a controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I add amber covers?\u003c\/strong\u003e\u003cbr\u003eYes. Our \u003ca href=\"https:\/\/nvmos.com\/products\/amber-yellow-snap-on-light-covers-ineos-grenadier-3-light-bumper-bar-set-of-3\"\u003eamber\/yellow snap-on covers (set of 3)\u003c\/a\u003e are molded for this exact bar and reduce glare in fog, dust, and snow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it different from the 32\" bar?\u003c\/strong\u003e\u003cbr\u003eThis three-pod bar produces ~13,200 lumens at ~110W, while the \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-32-led-light-bar\"\u003e32\" single-row bar\u003c\/a\u003e puts out 8,800 lumens at 90W with a lower-profile continuous face. Both use the same bumper mount.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024270209327,"sku":"I-LP-3B","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-front-bumper-light-kit-mount-3-light-led-bar-3414010_d5b802f6-cdaf-4040-abc5-84635e23189b.jpg?v=1774973878"},{"product_id":"ineos-grenadier-front-bumper-light-bar-clean-factory-integrated-lighting-upgrade","title":"INEOS Grenadier: Front Bumper Light Mount","description":"\u003cp\u003eThe INEOS Grenadier Front Bumper Light Mount positions a straight LED light bar dead-center inside the factory bumper opening, so your Grenadier looks stock during the day and throws serious light after dark. Machined from high-grade steel and finished in textured black powder coat, it bolts to existing factory mounting points — no cutting, no drilling, no trimming of the bumper, grille, or plastics. Because it sits inside the opening rather than hanging off the front, it preserves radiator airflow, the factory crash bar, and your full approach angle.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-grade steel bracket system finished in textured black powder coat\u003c\/li\u003e\n\u003cli\u003e100% bolt-on install using existing factory mounting points — zero cutting or drilling\u003c\/li\u003e\n\u003cli\u003eMounts a straight LED bar inside the bumper opening for a hidden-hardware, factory-clean look\u003c\/li\u003e\n\u003cli\u003ePreserves full radiator airflow, factory crash bar integrity, approach angle, and ground clearance\u003c\/li\u003e\n\u003cli\u003eRetains OEM fog light locations and function\u003c\/li\u003e\n\u003cli\u003eBroad light compatibility — works with DVA, Rigid, Baja Designs, Diode Dynamics, and most straight LED bars\u003c\/li\u003e\n\u003cli\u003eOffered in U.S.\/Global and Euro fitments to match your bumper's opening and sensor layout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2023–present). Choose the U.S.\/Global variant for bumpers with integrated amber marker lights and the wider center opening, or the Euro variant for the narrower center slot and different parking-sensor layout. Note: this mount is \u003cstrong\u003enot\u003c\/strong\u003e compatible with the Euro bumper that has an integrated winch. Designed for straight LED light bars; curved bars may not seat correctly. This listing is the mount only — the LED bar is not included.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-grade steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eTextured black powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall method\u003c\/td\u003e\n\u003ctd\u003e100% bolt-on, factory mounting points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003e45–60 minutes with basic hand tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModifications\u003c\/td\u003e\n\u003ctd\u003eNone — no cutting, drilling, or trimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment variants\u003c\/td\u003e\n\u003ctd\u003eU.S.\/Global and Euro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWinch compatibility\u003c\/td\u003e\n\u003ctd\u003eWorks with or without a winch (not for Euro bumper with integrated winch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow \/ approach angle\u003c\/td\u003e\n\u003ctd\u003eNo impact — full radiator airflow and approach angle retained\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eINEOS Grenadier (2023–present)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront bumper light bar mount (bracket system)\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill I have to cut or drill my bumper?\u003c\/strong\u003e\u003cbr\u003e\nNo. The mount uses the Grenadier's existing factory mounting points for a true bolt-on install. No cutting, drilling, or trimming of the bumper, grille, or plastics is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich fitment do I need — U.S.\/Global or Euro?\u003c\/strong\u003e\u003cbr\u003e\nMatch it to your bumper. The U.S.\/Global version fits bumpers with amber marker lights and a wider center opening; the Euro version fits the narrower center slot and different parking-sensor layout. The mount is not compatible with the Euro bumper that includes an integrated winch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it affect radiator airflow or approach angle?\u003c\/strong\u003e\u003cbr\u003e\nNo. The bar sits inside the factory bumper opening, so radiator airflow, the factory crash bar, approach angle, and ground clearance are all preserved.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat light bars will fit this mount?\u003c\/strong\u003e\u003cbr\u003e\nIt is built for straight LED light bars and is compatible with popular brands including DVA, Rigid, Baja Designs, and Diode Dynamics. Curved bars are not recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a light bar included?\u003c\/strong\u003e\u003cbr\u003e\nNo. This listing is for the mounting system only. Pair it with our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-32-led-light-bar\"\u003e32\" LED light bar\u003c\/a\u003e, \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-2-light-set\"\u003e2-light set\u003c\/a\u003e, or \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-front-bumper-3-light-bar\"\u003e3-light bar\u003c\/a\u003e to complete the system.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"U.S. Fit","offer_id":56024276173103,"sku":"I-LB-FB-U","price":499.0,"currency_code":"USD","in_stock":true},{"title":"Euro Fit","offer_id":56024276205871,"sku":"I-LB-FB-E","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-front-bumper-light-mount-clean-factory-integrated-lighting-mount-8999051_e9ac86c3-9c78-4402-813d-5609c53bcb6f.jpg?v=1774973888"},{"product_id":"ineos-grenadier-2-trailer-rear-hitch","title":"INEOS Grenadier: Rear 2\" Hitch Receiver – Heavy-Duty Towing Upgrade","description":"\u003cp\u003eAdd a true 2-inch receiver to the back of your INEOS Grenadier without spoiling its factory lines. This bolt-on hitch mounts to the existing frame and bumper points, so it slots in behind the rear bumper with an OEM-clean look while opening the door to trailers, bike racks, cargo carriers, and recovery gear. High-grade welded steel and a textured black powder coat make it as tough as the truck it bolts to.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStandard 2\" x 2\" receiver accepts the full universe of hitch-mounted accessories\u003c\/li\u003e\n\u003cli\u003eHigh-grade steel with a high-strength welded design for real-world towing and utility loads\u003c\/li\u003e\n\u003cli\u003eTextured black powder-coat finish resists corrosion and scratches and matches the Grenadier's rugged look\u003c\/li\u003e\n\u003cli\u003eBolts to existing factory frame and bumper mounts with no cutting or drilling\u003c\/li\u003e\n\u003cli\u003eEngineered to retain full departure angle and ground clearance\u003c\/li\u003e\n\u003cli\u003eInstalls in under an hour with basic hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2024-current). The receiver bolts to factory frame and bumper mounting points. For trailer lighting and brakes, you'll need the factory towing harness or an INEOS OEM\/aftermarket wiring harness, which is not included with the receiver.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReceiver size\u003c\/td\u003e\n\u003ctd\u003e2\" x 2\" standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-grade steel, high-strength welded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eTextured black powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-on, no cutting or drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003eUnder 1 hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTools required\u003c\/td\u003e\n\u003ctd\u003e14mm hex key and basic hand tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClearance\u003c\/td\u003e\n\u003ctd\u003eRetains factory departure angle and ground clearance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x rear 2\" hitch receiver in textured black powder coat\u003c\/li\u003e\n\u003cli\u003eMounting hardware kit\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size accessories does this receiver take?\u003c\/strong\u003e\u003cbr\u003e\nIt's a standard 2\" x 2\" receiver, so it accepts common 2-inch hitch accessories such as ball mounts, bike racks, cargo carriers, and recovery hitches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I have to drill or cut anything to install it?\u003c\/strong\u003e\u003cbr\u003e\nNo. The receiver bolts directly to existing factory frame and bumper mounts, so there is no cutting, drilling, or permanent modification. Most owners complete the job in under an hour with basic hand tools and a 14mm hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it change my departure angle or ground clearance?\u003c\/strong\u003e\u003cbr\u003e\nNo. The hitch is designed to tuck in behind the factory bumper and retain full departure angle and clearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do I need to wire up trailer lights and brakes?\u003c\/strong\u003e\u003cbr\u003e\nThe receiver is the mechanical hitch only. You'll need the factory towing harness or an INEOS OEM\/aftermarket wiring harness to power trailer lighting and brakes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich model years does it fit?\u003c\/strong\u003e\u003cbr\u003e\nIt is built for the INEOS Grenadier from the 2024 model year through current production.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024278303023,"sku":"I-E-TH","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-rear-2-hitch-receiver-heavy-duty-towing-upgrade-6304004.jpg?v=1774973893"},{"product_id":"exterior-utility-belt-front-set-for-ineos-grenadier","title":"INEOS Grenadier: Exterior Utility Belt - Front Section-Only","description":"\u003cp\u003eThe Exterior Utility Belt Front Section retrofits your INEOS Grenadier's four door belt lines with L-Track mounting rails, turning the flanks of the Station Wagon into a body-mounted gear platform. Built from 6061 aluminum with a dual anodized-and-powder-coated finish, it outlasts the factory anodize-only Armor Utility Belt and bolts on to existing door points with no drilling. This section covers the doors only — it is the ideal starting kit for owners whose Grenadier never came with the factory option.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e6061 aluminum construction with a dual-layer finish: hard anodize under powder coat for chip, scratch, and UV resistance well beyond the factory single-layer spec\u003c\/li\u003e\n\u003cli\u003eCovers all four door belt lines — front driver, front passenger, rear driver, and rear passenger doors\u003c\/li\u003e\n\u003cli\u003eNative L-Track channel accepts standard L-Track accessories: MOLLE panels, jerry can mounts, recovery board carriers, light mounts, and tie-down anchors\u003c\/li\u003e\n\u003cli\u003eTrue bolt-on install to existing Grenadier door mounting points — no drilling, fully reversible to stock\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware included\u003c\/li\u003e\n\u003cli\u003eDoes not include the two rear trunk panels below the rear windows — step up to the \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eFull Set\u003c\/a\u003e for complete six-position coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier Station Wagon (2023–present), all trims, using OEM-equivalent dimensions for a direct retrofit. Best suited to vehicles that did not come with the factory Armor Utility Belt. Accessories attach via the universal L-Track standard, so anything L-Track compatible will mount. For rear-door-only coverage see our \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-rear-only-set-for-ineos-grenadier\"\u003eRear Section\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061 aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodized + powder-coated (dual layer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePositions covered\u003c\/td\u003e\n\u003ctd\u003e4 door belt lines (both fronts, both rears)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eBolt-on to factory points, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003eApproximately 60–90 minutes with hand tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eStainless steel, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccessory standard\u003c\/td\u003e\n\u003ctd\u003eL-Track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReversible\u003c\/td\u003e\n\u003ctd\u003eYes — returns to stock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4 door utility belt panels (front driver, front passenger, rear driver, rear passenger)\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Front Section and the Full Set?\u003c\/strong\u003e\u003cbr\u003e\nThe Front Section covers the four door belt lines. The \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eFull Set\u003c\/a\u003e adds the two rear trunk panels below the rear windows for full six-position coverage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this kit include the rear trunk panels?\u003c\/strong\u003e\u003cbr\u003e\nNo. The Front Section is doors only. The trunk panels come with the Full Set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I mount to it?\u003c\/strong\u003e\u003cbr\u003e\nAny standard L-Track accessory — MOLLE panels, jerry can carriers, recovery board mounts, auxiliary lights, and tie-down anchors. Our \u003ca href=\"https:\/\/nvmos.com\/products\/l-track-slider-for-dualtrack-roof-rails-ineos-grenadier-utility-belt\"\u003eL-Track sliders\u003c\/a\u003e give you adjustable bolt-down points anywhere along the rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I have to drill into my Grenadier?\u003c\/strong\u003e\u003cbr\u003e\nNo. It bolts to existing factory door mounting points and is fully reversible to stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it better than the factory belt?\u003c\/strong\u003e\u003cbr\u003e\nSame dimensions and bolt-on fit, but a dual anodize-plus-powder-coat finish resists stone chips, brush contact, and UV far better than the factory anodize-only panels.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024280072495,"sku":"I-UB-FS","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/exterior-utility-belt-full-set-for-ineos-grenadier-2235561_eb53e142-06a9-4076-a332-d87a657644a5.jpg?v=1774973896"},{"product_id":"led-side-flood-light-ineos-grenadier-roof-bar-dtp-plug-in","title":"INEOS Grenadier: LED Side Flood Light – Roof Bar Mount \u0026 DTP Plug-In","description":"\u003cp\u003eThe INEOS Grenadier LED Side Flood Light throws 2,400 lumens of broad, even flood coverage per unit — ideal for lighting up camp, a recovery scene, or a work zone right beside the truck. It clamps to the factory roof bar and arrives pre-fitted with a DTP connector, so it plugs straight into the Grenadier's EXT3 rooftop power port. No wiring runs, no relays, no drilling, and no modifications to the vehicle.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2,400 lumens of wide flood output per unit for broad, even area coverage close to the vehicle\u003c\/li\u003e\n\u003cli\u003ePre-fitted Deutsch DTP connector plugs directly into the factory EXT3 rooftop power port\u003c\/li\u003e\n\u003cli\u003ePrecision roof-bar clamp mounts to the Grenadier's factory roof bar with no drilling\u003c\/li\u003e\n\u003cli\u003eIP68-rated aluminum housing with cooling fins for sustained output and all-weather use\u003c\/li\u003e\n\u003cli\u003eIncludes a snap-on yellow lens to cut glare and backscatter in fog, dust, and snow\u003c\/li\u003e\n\u003cli\u003eAvailable as a 1-pack or 2-pack to light one or both sides of the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2023–present, all trims) with the factory roof bar. It draws power from the EXT3 rooftop port, which offers access points above the left front door, left rear door, and right rear door — the most practical port for roof-bar accessories on either side of the vehicle. Choose the flood version for area lighting; if you want directional throw at range, see our \u003ca href=\"https:\/\/nvmos.com\/products\/led-side-light-for-ineos-grenadier-roof-bar-mount-dtp-plug-in\"\u003eLED Side Light\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput per unit\u003c\/td\u003e\n\u003ctd\u003e2,400 lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam pattern\u003c\/td\u003e\n\u003ctd\u003eWide flood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eDeutsch DTP (pre-installed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower port\u003c\/td\u003e\n\u003ctd\u003eFactory EXT3 rooftop port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount\u003c\/td\u003e\n\u003ctd\u003eFactory roof-bar clamp (no drilling)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eAluminum with cooling fins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeather rating\u003c\/td\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens\u003c\/td\u003e\n\u003ctd\u003eSnap-on yellow lens included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit options\u003c\/td\u003e\n\u003ctd\u003e1-pack or 2-pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eINEOS Grenadier (2023–present)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLED side flood light unit(s) with pre-fitted DTP connector\u003c\/li\u003e\n\u003cli\u003eSnap-on yellow lens per light\u003c\/li\u003e\n\u003cli\u003eFactory roof-bar clamp and bracket\u003c\/li\u003e\n\u003cli\u003eStainless mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Side Flood Light and the Side Light?\u003c\/strong\u003e\u003cbr\u003e\nThis flood light casts a wide, even beam for broad coverage close to the truck — best for camp setup, recovery operations, and work zones. The LED Side Light uses a more focused beam optimized for directional trail illumination and visibility at range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to wire anything or add a switch?\u003c\/strong\u003e\u003cbr\u003e\nNo. Each light is pre-fitted with a DTP connector that plugs directly into the Grenadier's factory EXT3 rooftop port. There are no wiring runs, relays, or switches to install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes mounting require drilling?\u003c\/strong\u003e\u003cbr\u003e\nNo. The precision clamp attaches to the factory roof bar with no drilling or modification to the vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I run the yellow lens for fog and dust?\u003c\/strong\u003e\u003cbr\u003e\nYes. A snap-on yellow lens is included with each light. It reduces glare and backscatter in fog, dust, and snow and swaps on and off without tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I light both sides of the truck?\u003c\/strong\u003e\u003cbr\u003e\nYes. Order the 2-pack to mount a flood light on each side of the roof bar for wide, symmetrical area coverage.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"1-Pack","offer_id":56024281973039,"sku":"I-LB-1F","price":139.0,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":56024282005807,"sku":"I-LB-1F-2","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/led-side-flood-light-for-ineos-grenadier-roof-bar-mount-dtp-plug-in-6222111.jpg?v=1774973899"},{"product_id":"led-side-light-for-ineos-grenadier-roof-bar-mount-dtp-plug-in","title":"INEOS Grenadier: LED Side Light – Roof Bar Mount \u0026 DTP Plug-In","description":"\u003cp\u003eThe INEOS Grenadier LED Side Light gives you focused, roof-mounted trail illumination that installs in minutes. Each light is a 30W aluminum unit that clamps to the factory roof bar and comes pre-fitted with a Deutsch DTP connector — plug it into the Grenadier's EXT3 rooftop power port, tighten the clamp, and drive. No new wiring, no relay, no switch, and no drilling: it runs on factory power through the factory connector.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e30W-per-light output with a directional beam tuned for trail visibility at range\u003c\/li\u003e\n\u003cli\u003ePre-installed Deutsch DTP connector plugs straight into the factory EXT3 rooftop port\u003c\/li\u003e\n\u003cli\u003ePrecision-machined clamp mounts to the Grenadier's factory roof bar — no drilling or modification\u003c\/li\u003e\n\u003cli\u003eIP68-rated aluminum housing with cooling fins for durable, all-weather performance\u003c\/li\u003e\n\u003cli\u003eTwo output modes: white LED for wide-beam trail light, plus an included snap-on yellow lens for fog, dust, snow, and reduced glare\u003c\/li\u003e\n\u003cli\u003eAvailable as a Single Light Kit or Dual Light Kit (dual kit adds a DTP splitter to run both from one port)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2023–present, all trims) with the factory roof bar. It powers from the EXT3 rooftop port, which has three access points — above the left front door, left rear door, and right rear door — making it the most practical port for roof-bar accessories on either side of the truck. Prefer broad area coverage over throw? Consider our \u003ca href=\"https:\/\/nvmos.com\/products\/led-side-flood-light-ineos-grenadier-roof-bar-dtp-plug-in\"\u003eLED Side Flood Light\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower per light\u003c\/td\u003e\n\u003ctd\u003e30W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam\u003c\/td\u003e\n\u003ctd\u003eWhite LED, wide-beam directional throw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eDeutsch DTP (pre-installed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower port\u003c\/td\u003e\n\u003ctd\u003eFactory EXT3 rooftop port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount\u003c\/td\u003e\n\u003ctd\u003ePrecision roof-bar clamp (no drilling)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eAluminum with cooling fins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeather rating\u003c\/td\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens\u003c\/td\u003e\n\u003ctd\u003eSnap-on yellow lens included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit options\u003c\/td\u003e\n\u003ctd\u003eSingle Light Kit or Dual Light Kit (dual adds DTP splitter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eINEOS Grenadier (2023–present)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLED side light unit(s) with pre-fitted DTP connector\u003c\/li\u003e\n\u003cli\u003eSnap-on yellow lens per light\u003c\/li\u003e\n\u003cli\u003eRoof-bar clamp and bracket\u003c\/li\u003e\n\u003cli\u003eStainless hardware and hex keys\u003c\/li\u003e\n\u003cli\u003eDTP splitter (Dual Light Kit only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow does this install without wiring?\u003c\/strong\u003e\u003cbr\u003e\nEach light comes pre-fitted with a Deutsch DTP connector that plugs directly into the Grenadier's factory EXT3 rooftop power port. There is no new wiring, relay, or switch to add — it uses factory power and the factory connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to drill the roof bar?\u003c\/strong\u003e\u003cbr\u003e\nNo. The precision-machined clamp attaches to the factory roof bar with no drilling or modifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the yellow lens do?\u003c\/strong\u003e\u003cbr\u003e\nThe included snap-on yellow lens filters the white LED for fog, dust, snow, and reduced glare. It swaps on and off by hand with no tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I run two lights from a single port?\u003c\/strong\u003e\u003cbr\u003e\nYes. The Dual Light Kit includes a DTP splitter so both lights operate from one EXT3 rooftop port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSide Light or Side Flood Light — which should I pick?\u003c\/strong\u003e\u003cbr\u003e\nChoose this Side Light for focused, directional trail illumination optimized for range. Choose the Side Flood Light if you want broad, even coverage for camp, work, and recovery close to the vehicle.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Single Light Kit","offer_id":56024284365103,"sku":"I-LP-1P","price":139.0,"currency_code":"USD","in_stock":true},{"title":"Dual Light Kit","offer_id":56024284397871,"sku":"I-LP-2P","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/DSC00038-HDR.jpg?v=1774973904"},{"product_id":"awning-mount-for-dualtrack-roof-rails","title":"INEOS Grenadier: Awning Mount for DualTrack Roof Rails (Set of 2)","description":"\u003cp\u003eMount a rooftop awning to your INEOS Grenadier without stacking up adapters and spacers. This set of two brackets drops straight into the channels of our \u003ca href=\"https:\/\/nvmos.com\/products\/dualtrack-roof-rail-ineos-grenadier\"\u003eDualTrack roof rail system\u003c\/a\u003e, giving your awning a direct, rock-solid anchor that adds only about 3 inches of clearance for a clean, low-profile stance. The latest version is built from stainless steel for serious strength against wind load and off-road vibration.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStainless-steel construction (current V2) for high strength and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eDirect-fit into the DualTrack roof rail channels using the included hardware\u003c\/li\u003e\n\u003cli\u003eFits most roof-mounted awnings, from 270-degree wrap-around units to classic straight pull-out designs\u003c\/li\u003e\n\u003cli\u003eAdds just about 3 inches of clearance for a low-profile, factory-clean look\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no drilling or modification\u003c\/li\u003e\n\u003cli\u003eEngineered to hold steady through heavy wind loads and rugged terrain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eBuilt specifically for the INEOS Grenadier running the DualTrack roof rail system. The brackets seat into the DualTrack channel, so they require our DualTrack rails (sold separately) rather than mounting to a bare roof. On the awning side, the set is compatible with most leading roof-mounted awning brands in both 270-degree wrap-around and straight-pull configurations.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless steel (current V2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eSet of 2 brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting standard\u003c\/td\u003e\n\u003ctd\u003eDualTrack roof rail channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdded clearance\u003c\/td\u003e\n\u003ctd\u003eApproximately 3 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAwning compatibility\u003c\/td\u003e\n\u003ctd\u003e270-degree wrap-around and straight-pull designs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-on, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x DualTrack awning mount brackets\u003c\/li\u003e\n\u003cli\u003eMounting hardware for the DualTrack channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDo these brackets fit my awning brand?\u003c\/strong\u003e\u003cbr\u003e\nThey're designed to fit most leading roof-mounted awnings, including 270-degree wrap-around units and traditional straight pull-out awnings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do I need to use these mounts?\u003c\/strong\u003e\u003cbr\u003e\nYou need our DualTrack roof rail system on your Grenadier. The brackets seat directly into the DualTrack channel, so they aren't meant to bolt to a bare roof or to standard crossbars without that channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much do they raise the awning off the rail?\u003c\/strong\u003e\u003cbr\u003e\nThey add only about 3 inches of clearance, keeping the awning low-profile and close to the roofline.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs any drilling required?\u003c\/strong\u003e\u003cbr\u003e\nNo. It's a bolt-on install that uses the included hardware and the DualTrack channel, with no drilling or permanent modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they hold up off-road?\u003c\/strong\u003e\u003cbr\u003e\nYes. The current stainless-steel version is built to handle heavy wind loads and off-road vibration for a secure, rattle-free mount.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024286167343,"sku":"I-DT-AM","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/awning-mount-for-dualtrack-roof-rails-set-of-2-4837560.jpg?v=1774973906"},{"product_id":"exterior-utility-belt-rear-only-set-for-ineos-grenadier","title":"INEOS Grenadier: Exterior Utility Belt - Rear Section-Only","description":"\u003cp\u003eThe Exterior Utility Belt Rear Section is the entry point into the Grenadier's L-Track belt system, adding gear-mounting rails to the two rear door belt lines. It is built for owners who want rear-mounted MOLLE and recovery access now, with the option to expand to the doors or full perimeter later. Like the rest of the system, it is machined from 6061 aluminum and carries a dual anodized-and-powder-coated finish that holds up better than the factory anodize-only panels.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCovers the two rear door belt lines — rear driver and rear passenger doors\u003c\/li\u003e\n\u003cli\u003e6061 aluminum with a dual-layer finish (hard anodize under powder coat) for chip, scratch, and UV resistance\u003c\/li\u003e\n\u003cli\u003eL-Track channel accepts MOLLE panels, jerry can mounts, recovery board carriers, and tie-down anchors — the rear doors are the natural home for soft-gear MOLLE organisation you can reach without opening the boot\u003c\/li\u003e\n\u003cli\u003eBolt-on to factory rear door points — no drilling, fully reversible to stock\u003c\/li\u003e\n\u003cli\u003eOEM-equivalent stainless mounting hardware included\u003c\/li\u003e\n\u003cli\u003eModular: add the front doors or move up to the Full Set as your build grows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier Station Wagon (2023–present), all trims, with OEM-equivalent dimensions for a direct retrofit. Ideal for Grenadiers that did not include the factory Armor Utility Belt. Everything mounts through the universal L-Track standard. For four-door coverage step up to the \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-front-set-for-ineos-grenadier\"\u003eFront Section\u003c\/a\u003e, or get all six positions with the \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eFull Set\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061 aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodized + powder-coated (dual layer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePositions covered\u003c\/td\u003e\n\u003ctd\u003e2 rear door belt lines (of 6 possible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eBolt-on to factory points, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003eApproximately 30–45 minutes with hand tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eOEM-equivalent stainless, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccessory standard\u003c\/td\u003e\n\u003ctd\u003eL-Track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReversible\u003c\/td\u003e\n\u003ctd\u003eYes — returns to stock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 rear driver-side utility belt rail\u003c\/li\u003e\n\u003cli\u003e1 rear passenger-side utility belt rail\u003c\/li\u003e\n\u003cli\u003eOEM-equivalent stainless mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Rear Section cover?\u003c\/strong\u003e\u003cbr\u003e\nThe two rear door belt lines only — rear driver and rear passenger. It does not include the front doors or the rear trunk panels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy start with the rear?\u003c\/strong\u003e\u003cbr\u003e\nThe rear doors are the most practical spot for MOLLE panels and recovery gear you want to reach without opening the tailgate. It is the lowest-cost way into the system, and you can expand later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I add the rest of the belt?\u003c\/strong\u003e\u003cbr\u003e\nAdd the \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-front-set-for-ineos-grenadier\"\u003eFront Section\u003c\/a\u003e for the front doors, or move to the \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eFull Set\u003c\/a\u003e for all four doors plus both rear trunk panels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I mount to it?\u003c\/strong\u003e\u003cbr\u003e\nAny standard L-Track accessory — MOLLE panels, jerry can carriers, recovery board mounts, and tie-down anchors. Pair it with our \u003ca href=\"https:\/\/nvmos.com\/products\/l-track-slider-for-dualtrack-roof-rails-ineos-grenadier-utility-belt\"\u003eL-Track sliders\u003c\/a\u003e for adjustable anchor points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to drill?\u003c\/strong\u003e\u003cbr\u003e\nNo. It bolts to factory rear door points and reverses cleanly to stock.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024288133423,"sku":"I-UB-P","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/dva-exterior-utility-belt-full-set-for-ineos-grenadier-5109039.jpg?v=1774973910"},{"product_id":"interior-utility-rails-for-ineos-grenadier","title":"INEOS Grenadier: Interior Utility Rails","description":"\u003cp\u003eThe Interior Utility Rails turn the INEOS Grenadier's rear cargo area into a configurable L-Track load system, mounting along the driver and passenger sides of the trunk. Machined from anodized 6061 aluminum, they install with a direct bolt-on to factory points and give you movable anchor positions for tie-downs, hooks, dividers, and cargo boxes — a stronger, better-finished answer for owners whose Grenadier didn't come with the factory interior rail option.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e6061 aluminum construction for a high strength-to-weight ratio with real off-road durability\u003c\/li\u003e\n\u003cli\u003eAnodized finish resists fading, scratches, corrosion, and wear\u003c\/li\u003e\n\u003cli\u003eFull L-Track channel accepts tie-down rings, gear hooks, threaded lugs, dividers, and other L-Track fittings — reposition anchor points anywhere along the rail\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on to factory interior mounting points — no drilling\u003c\/li\u003e\n\u003cli\u003eShips as a pair for the driver and passenger sides of the trunk\u003c\/li\u003e\n\u003cli\u003eOEM-equivalent hardware and instructions included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier Station Wagon (2023–present), all trims, mounting to the driver and passenger sides of the interior trunk using factory points. Intended for vehicles that did not receive the factory Interior Utility Rail System option. Uses the universal L-Track standard, so it shares accessories with our \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eExterior Utility Belt\u003c\/a\u003e and DualTrack roof system.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061 aluminum, anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e2 rails (driver \u0026amp; passenger sides)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocation\u003c\/td\u003e\n\u003ctd\u003eInterior trunk, both sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDirect bolt-on to factory points, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccessory standard\u003c\/td\u003e\n\u003ctd\u003eL-Track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eOEM-equivalent, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 interior trunk L-Track rails (driver \u0026amp; passenger)\u003c\/li\u003e\n\u003cli\u003eOEM-equivalent mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhere do these mount?\u003c\/strong\u003e\u003cbr\u003e\nAlong the driver and passenger sides of the Grenadier's interior trunk, using existing factory mounting points — no drilling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I attach to them?\u003c\/strong\u003e\u003cbr\u003e\nAny standard L-Track accessory: tie-down rings, adjustable gear hooks, threaded lugs, and cargo dividers. Add \u003ca href=\"https:\/\/nvmos.com\/products\/l-track-slider-for-dualtrack-roof-rails-ineos-grenadier-utility-belt\"\u003eL-Track sliders\u003c\/a\u003e for repositionable bolt-down points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many rails come in the set?\u003c\/strong\u003e\u003cbr\u003e\nTwo — one for each side of the trunk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these share accessories with the exterior belt?\u003c\/strong\u003e\u003cbr\u003e\nYes. All DVA utility mounting uses the universal L-Track standard, so fittings interchange between the interior rails, the \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eExterior Utility Belt\u003c\/a\u003e, and the DualTrack roof rails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs drilling required?\u003c\/strong\u003e\u003cbr\u003e\nNo. They bolt to factory points and are fully reversible.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024290066735,"sku":"I-UB-I","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/interior-utility-rails-for-ineos-grenadier-2289307.jpg?v=1774973913"},{"product_id":"exterior-utility-belt-full-set-for-ineos-grenadier","title":"INEOS Grenadier: Exterior Utility Belt - Full Set","description":"\u003cp\u003eThe Exterior Utility Belt Full Set is the complete six-position retrofit that wraps the INEOS Grenadier's entire perimeter in L-Track gear-mounting rails — all four doors plus both rear trunk panels below the rear windows. It reproduces the factory Armor Utility Belt dimension-for-dimension, but adds a dual anodized-and-powder-coated finish that resists the stone chips, brush, and UV that wear factory anodize-only panels over time. This is the bundle: buy it once for whole-vehicle coverage rather than adding sections later.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFull six-position coverage: front driver, front passenger, rear driver, and rear passenger doors, plus the driver- and passenger-side rear trunk panels\u003c\/li\u003e\n\u003cli\u003e6061 aluminum construction with a two-layer finish — hard anodize provides the base and surface hardness, powder coat over the top adds chip resistance and a UV-stable colour layer\u003c\/li\u003e\n\u003cli\u003eAccepts standard L-Track accessories across the whole body: jerry can mounts, recovery board carriers (MaxTrax, TRED, ARB), MOLLE panels, light mounts, and tie-down anchors — trail gear on the body without roof-rack overhead\u003c\/li\u003e\n\u003cli\u003eBolt-on to factory mounting points — no drilling, fully reversible to stock\u003c\/li\u003e\n\u003cli\u003eStainless steel screws and a complete OEM-equivalent hardware kit included\u003c\/li\u003e\n\u003cli\u003eBundles the coverage of the \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-front-set-for-ineos-grenadier\"\u003eFront Section\u003c\/a\u003e and \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-rear-only-set-for-ineos-grenadier\"\u003eRear Section\u003c\/a\u003e plus the two trunk panels neither includes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier Station Wagon (2023–present), all trims, using OEM-equivalent dimensions for a direct replacement fit. Designed for owners whose Grenadier did not come with the factory Armor Utility Belt option. All mounting is through the universal L-Track standard, so any L-Track accessory attaches anywhere on the belt.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061 aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodized + powder-coated (dual layer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePositions covered\u003c\/td\u003e\n\u003ctd\u003e6 (four doors + two rear trunk panels)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eBolt-on to factory points, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003eApproximately 60–90 minutes with hand tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eStainless steel screws, complete kit included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccessory standard\u003c\/td\u003e\n\u003ctd\u003eL-Track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReversible\u003c\/td\u003e\n\u003ctd\u003eYes — returns to stock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e6 utility belt panels (four door panels + two rear trunk panels)\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting screws\u003c\/li\u003e\n\u003cli\u003eComplete OEM-equivalent hardware kit\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the Full Set include that the section kits do not?\u003c\/strong\u003e\u003cbr\u003e\nThe Full Set covers all six positions — the four door belt lines plus both rear trunk panels below the rear windows. The \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-front-set-for-ineos-grenadier\"\u003eFront Section\u003c\/a\u003e covers the four doors only; the \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-rear-only-set-for-ineos-grenadier\"\u003eRear Section\u003c\/a\u003e covers the two rear doors only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Full Set the same as the factory belt?\u003c\/strong\u003e\u003cbr\u003e\nSame dimensions and bolt-on fit, but the DVA belt uses two finish layers versus the factory's single anodize, so it holds up far better to trail abuse and UV.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I mount to it?\u003c\/strong\u003e\u003cbr\u003e\nStandard L-Track accessories anywhere on the body — jerry cans, recovery boards, MOLLE panels, lights, and tie-downs. Add our \u003ca href=\"https:\/\/nvmos.com\/products\/l-track-slider-for-dualtrack-roof-rails-ineos-grenadier-utility-belt\"\u003eL-Track sliders\u003c\/a\u003e for adjustable bolt-down points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to drill?\u003c\/strong\u003e\u003cbr\u003e\nNo. Every panel bolts to factory points and the install is fully reversible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does installation take?\u003c\/strong\u003e\u003cbr\u003e\nAbout 60 to 90 minutes with basic hand tools.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024292458799,"sku":"I-UB-F","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-exterior-utility-belt-full-set-9719404.jpg?v=1774973918"},{"product_id":"l-track-slider-for-dualtrack-roof-rails-ineos-grenadier-utility-belt","title":"L-Track Slider for DualTrack Roof Rails \u0026 INEOS Grenadier Utility Belt","description":"\u003cp\u003eThese L-Track Sliders are the anchor points that make the DVA mounting system work: slide one into any L-Track channel, seat it with a quarter-turn lock, and you have a rock-solid bolt-down point exactly where you need it. They are engineered for the DualTrack Roof Rail system and drop straight into the INEOS Grenadier's Exterior Utility Belt and Interior Utility Rails as well, giving you one hardware standard inside and out. Choose M6 or M8 stud size and a 1-hole or 4-hole platform to match the gear you're mounting.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSlide-in fit for any standard L-Track channel; seats and secures with a tool-free quarter-turn locking mechanism\u003c\/li\u003e\n\u003cli\u003eReposition anywhere along the rail — unlock, slide, and relock instead of living with fixed anchor points\u003c\/li\u003e\n\u003cli\u003e1-hole slider for single-point, lightweight attachments; 4-hole slider spreads the load for heavier or multi-point gear\u003c\/li\u003e\n\u003cli\u003eM6 stud for lighter accessories; M8 stud engineered for heavy-duty loads and critical mounts\u003c\/li\u003e\n\u003cli\u003eWorks across the DVA ecosystem: \u003ca href=\"https:\/\/nvmos.com\/products\/dualtrack-roof-rail-ineos-grenadier\"\u003eDualTrack Roof Rails\u003c\/a\u003e, the \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eExterior Utility Belt\u003c\/a\u003e, and the \u003ca href=\"https:\/\/nvmos.com\/products\/interior-utility-rails-for-ineos-grenadier\"\u003eInterior Utility Rails\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSold in packs of eight sliders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eUniversal to the L-Track mounting standard, so they fit any true L-Track rail. On the INEOS Grenadier (2023–present) that means the DualTrack roof crossbars, the exterior body-mounted Utility Belt, and the interior trunk rails all take the same slider. Pick the stud size and hole count for your mission — M8 four-hole for jerry cans and recovery boards, M6 single-hole for lights and small accessories.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStud sizes\u003c\/td\u003e\n\u003ctd\u003eM6 or M8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlatform options\u003c\/td\u003e\n\u003ctd\u003e1-hole or 4-hole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack quantity\u003c\/td\u003e\n\u003ctd\u003e8 sliders per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocking\u003c\/td\u003e\n\u003ctd\u003eTool-free quarter-turn lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eUniversal L-Track (DualTrack rails, Utility Belt, Interior Utility Rails)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMachined, corrosion-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e8 L-Track sliders in the selected stud size (M6 or M8) and platform (1-hole or 4-hole)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between M6 and M8?\u003c\/strong\u003e\u003cbr\u003e\nStud diameter. M6 suits lighter gear and accessories; M8 is engineered for heavy-duty loads and critical, safety-relevant mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1-hole or 4-hole — which should I pick?\u003c\/strong\u003e\u003cbr\u003e\nThe 1-hole slider is a compact single-point anchor for lightweight gear. The 4-hole slider is a wider platform that distributes load for heavier or multi-point accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many come in a pack?\u003c\/strong\u003e\u003cbr\u003e\nEach pack contains eight sliders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need tools to install them?\u003c\/strong\u003e\u003cbr\u003e\nNo. They slide into the rail and lock with a quarter turn — no tools required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they fit rails other than the DualTrack roof system?\u003c\/strong\u003e\u003cbr\u003e\nYes. They are built to the universal L-Track standard, so they also fit the Grenadier \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eExterior Utility Belt\u003c\/a\u003e and \u003ca href=\"https:\/\/nvmos.com\/products\/interior-utility-rails-for-ineos-grenadier\"\u003eInterior Utility Rails\u003c\/a\u003e, plus any other true L-Track channel.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"M6 1-Hole 8-Pack","offer_id":56024294687023,"sku":"I-DT-1-M6","price":29.0,"currency_code":"USD","in_stock":true},{"title":"M6 4-Hole 8-Pack","offer_id":56024294719791,"sku":"I-DT-4-M6","price":39.0,"currency_code":"USD","in_stock":true},{"title":"M8 1-Hole 8-Pack","offer_id":56024294752559,"sku":"I-DT-1-M8","price":29.0,"currency_code":"USD","in_stock":true},{"title":"M8 4-Hole 8-Pack","offer_id":56024294785327,"sku":"I-DT-4-M8","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/l-track-slider-for-dualtrack-roof-rails-ineos-grenadier-utility-belt-7561707.jpg?v=1774973921"},{"product_id":"l-track-tie-down-ring-with-anchor-mount-4-pack","title":"L-Track Tie-Down Ring with Anchor Mount, 4-Pack","description":"\u003cp\u003eDrop these swivel D-ring anchors into any standard L-Track channel to create strong tie-down points exactly where your load needs them. Each ring rotates so straps and soft shackles pull cleanly from any angle without binding, and the slide-lock base repositions in seconds with no tools. Ideal for recovery gear, camp bins, coolers, and mixed daily loads where fixed factory anchors are never in the right spot.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSwivel D-ring rotates freely so straps pull from any direction without twisting the anchor\u003c\/li\u003e\n\u003cli\u003eForged steel body with zinc plating for corrosion resistance in wet and dusty conditions\u003c\/li\u003e\n\u003cli\u003eDrop-in slide-lock mechanism: insert, slide to position, and lock without tools or hardware\u003c\/li\u003e\n\u003cli\u003eFully repositionable along the rail, so anchor layout changes with each trip\u003c\/li\u003e\n\u003cli\u003eFour rings per pack for multi-point retention across a cargo area or roof rack\u003c\/li\u003e\n\u003cli\u003eNo drilling or permanent modification to your rail or vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eUniversal fit for standard L-Track (airline-style) rail with the repeating aircraft slot profile, including our \u003ca href=\"https:\/\/nvmos.com\/products\/dualtrack-roof-rail-ineos-grenadier\"\u003eDualTrack roof rail system\u003c\/a\u003e and the L-Track channels on our LoadSpan Sprinter rails. Works in Grenadier cargo builds, vans, trailers, and utility interiors. Not intended for airline seat rails or non-L-Track proprietary channels.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting type\u003c\/td\u003e\n\u003ctd\u003eSwivel D-ring tie-down with drop-in slide-lock anchor mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged steel, zinc plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail standard\u003c\/td\u003e\n\u003ctd\u003eStandard L-Track \/ airline-track profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e4 rings per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLT-4-AM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e4 x L-Track tie-down rings with anchor mounts\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my L-Track?\u003c\/strong\u003e\u003cbr\u003e\nYes, if your rail uses the standard L-Track (airline-track) slot profile with 1-inch on-center studs. They drop straight into our DualTrack roof rails and the L-Track channels on our LoadSpan Sprinter rails. They are not compatible with E-Track or proprietary non-L-Track channels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the rings swivel?\u003c\/strong\u003e\u003cbr\u003e\nYes. Each D-ring rotates on its base so a strap or shackle can pull from any angle without loading the anchor sideways or binding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need tools to install them?\u003c\/strong\u003e\u003cbr\u003e\nNo. Insert the fitting into the rail opening, slide it to position, and lock it in place. Repositioning is just as fast: unlock, slide, and relock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much can one ring hold?\u003c\/strong\u003e\u003cbr\u003e\nWorking load depends on your rail, mounting structure, and strap, not the ring alone. Distribute critical loads across multiple anchors and never rely on a single tie-down point for retention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre straps included?\u003c\/strong\u003e\u003cbr\u003e\nNo. This listing is for the four anchor rings only. Pair them with your own ratchet straps or soft shackles.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024296816943,"sku":"LT-4-AM","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/l-track-tie-down-ring-with-anchor-mount-4-pack-3288964.jpg?v=1774973925"},{"product_id":"4-pack-l-track-o-ring-stud-fitting-silver","title":"L-Track Tie Down O-Ring Fitting, Silver, 4-Pack","description":"\u003cp\u003eThese single-stud O-ring fittings add quick-lock anchor points anywhere along a standard L-Track rail, letting you rebuild your tie-down layout for each load instead of living with fixed factory anchors. The compact silver finish keeps them low-profile against polished rails and cargo panels. Perfect for clipping straps, bungees, and carabiners in enclosed cargo areas, trailers, and Grenadier storage builds.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSingle-stud O-ring interface locks into the L-Track slot for a fixed, repeatable anchor point\u003c\/li\u003e\n\u003cli\u003eZinc-alloy body with a bright chrome, silver finish that resists corrosion\u003c\/li\u003e\n\u003cli\u003eQuick-lock install and removal, so anchor positions change with your cargo\u003c\/li\u003e\n\u003cli\u003eRound O-ring accepts strap hooks, carabiners, and bungee ends\u003c\/li\u003e\n\u003cli\u003eFour fittings per pack for building out a full tie-down grid\u003c\/li\u003e\n\u003cli\u003eCan stay installed permanently or be pulled and repositioned as needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eUniversal fit for standard L-Track rails with airline-style slot geometry, including Grenadier cargo layouts, our LoadSpan Sprinter rail L-Track channels, and trailer applications. Not compatible with E-Track or non-standard rail profiles. If your rail brand or spec is unknown, verify the slot geometry before ordering.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting type\u003c\/td\u003e\n\u003ctd\u003eSingle-stud O-ring tie-down anchor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eZinc alloy, chrome finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ color\u003c\/td\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail standard\u003c\/td\u003e\n\u003ctd\u003eStandard L-Track with airline-style slot geometry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e4 O-ring studs per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLT-4-OS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e4 x silver O-ring stud fittings (rails, straps, and vehicle hardware not included)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the silver and orange O-ring fittings?\u003c\/strong\u003e\u003cbr\u003e\nThe silver fitting is a zinc-alloy, chrome-finished single stud for general tie-down use. Our \u003ca href=\"https:\/\/nvmos.com\/products\/single-stud-fitting-with-w-base-and-stainless-steel-o-ring-for-ineos-grenadier\"\u003eorange O-ring fitting\u003c\/a\u003e uses a 5mm stainless steel ring on a high-strength plastic W-base with a published 1500 kg breaking strength, making it the choice when you want a rated ring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit recessed L-Track?\u003c\/strong\u003e\u003cbr\u003e\nGenerally yes, provided the slot geometry follows the standard airline-style L-Track profile. Confirm clearance around any recessed channel before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these include tie-down straps?\u003c\/strong\u003e\u003cbr\u003e\nNo. This listing is for the four O-ring fittings only. Add your own straps, ratchets, or shackles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I leave them installed permanently?\u003c\/strong\u003e\u003cbr\u003e\nYes. They can stay locked in the rail with periodic inspection, or be removed and repositioned whenever your cargo layout changes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the working load limit?\u003c\/strong\u003e\u003cbr\u003e\nWorking load depends on your rail and strap ratings rather than the fitting alone. Match the anchor to the lowest-rated component in your system and spread critical loads across multiple points.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024298815791,"sku":"LT-4-OS","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/l-track-tie-down-o-ring-fitting-silver-4-pack-4531701.jpg?v=1774973928"},{"product_id":"l-track-heavy-duty-threaded-lug-8-pack","title":"L-Track Heavy Duty Threaded Lug, 3\/8\", 4 Pack","description":"\u003cp\u003eWhen you need a rated, load-bearing threaded anchor rather than a light strap ring, this Series L double-stud lug is the one to reach for. Each fitting locks into standard L-Track and presents a 3\/8\"-16 threaded post, giving you a hard mounting point for brackets, rack feet, cargo boxes, and vehicle storage systems. Carbon steel construction with a black zinc coating carries a 3000 lb minimum breaking strength for heavy hauling on trailers, trucks, and vans.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSeries L double-stud fitting seats securely in standard L-Track for a positive, non-slipping lock\u003c\/li\u003e\n\u003cli\u003e3\/8\"-16 UNC threaded stud accepts bolts, eye nuts, and threaded accessories\u003c\/li\u003e\n\u003cli\u003e3000 lb (1360 kg) minimum breaking strength for demanding cargo control\u003c\/li\u003e\n\u003cli\u003eCarbon steel body with corrosion-resistant black zinc coating\u003c\/li\u003e\n\u003cli\u003eHigh-tensile bolt included with each fitting\u003c\/li\u003e\n\u003cli\u003eTool-free rail engagement; no special installation tools required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eUniversal fit for standard L-Track (airline-track) systems on trailers, trucks, vans, and vehicle storage builds, including our DualTrack and LoadSpan L-Track channels. This is a structural threaded anchor, so verify your rail's own load rating and mounting before applying full load.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting type\u003c\/td\u003e\n\u003ctd\u003eSeries L double-stud threaded lug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread size\u003c\/td\u003e\n\u003ctd\u003e3\/8\"-16 UNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum breaking strength\u003c\/td\u003e\n\u003ctd\u003e3000 lbs (1360 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCarbon steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack zinc coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e244 g (per fitting)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e4 lugs per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLT-4-BP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4 x L-Track threaded lugs (3\/8\")\u003c\/li\u003e\n\u003cli\u003e4 x high-tensile bolts (one per fitting)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat thread size are these lugs?\u003c\/strong\u003e\u003cbr\u003e\nEach lug has a 3\/8\"-16 UNC threaded stud, so standard 3\/8\" hardware, eye nuts, and threaded accessories thread straight on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow strong are they?\u003c\/strong\u003e\u003cbr\u003e\nEach double-stud fitting carries a 3000 lb (1360 kg) minimum breaking strength. Actual working load also depends on your rail and mounting structure, so rate the system to its weakest component.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre bolts included?\u003c\/strong\u003e\u003cbr\u003e\nYes. Each fitting ships with a high-tensile bolt, so you can begin mounting immediately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do these differ from the M8 L-Track bolts?\u003c\/strong\u003e\u003cbr\u003e\nThese are 3\/8\"-16 carbon-steel lugs rated to 3000 lb for the heaviest anchoring. Our \u003ca href=\"https:\/\/nvmos.com\/products\/4-pack-m8-x-20mm-l-track-bolt\"\u003eM8 L-Track bolts\u003c\/a\u003e use metric M8 thread with a 1500 kg breaking strength and come in 20, 40, and 60 mm lengths for thinner mounting surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they fit my L-Track?\u003c\/strong\u003e\u003cbr\u003e\nYes, for standard L-Track (airline-track) rail. They are not designed for E-Track or proprietary non-L-Track channels.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024300781871,"sku":"LT-4-BP","price":19.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/l-track-heavy-duty-threaded-lug-38-4-pack-8297800.jpg?v=1774973931"},{"product_id":"l-track-adjustable-gear-hook-4-pack","title":"L-Track Adjustable Gear Hook, 4-Pack","description":"\u003cp\u003eGet gear up off the cargo floor and back within reach with these removable L-Track gear hooks. Each hook locks into an L-Track slot on a stud interface and slides to a new position without drilling, so you build repeatable hanging points for recovery gear, jackets, bags, and daily-carry items. When loose gear piles up in the back, access slows and equipment gets damaged; these keep it organized and reachable on trail or on the road.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable L-Track stud interface locks into single- or double-slot rails\u003c\/li\u003e\n\u003cli\u003eRepositionable along the rail without drilling or permanent modification\u003c\/li\u003e\n\u003cli\u003eCreates repeatable hanging points that stay put once locked, even off-road\u003c\/li\u003e\n\u003cli\u003eKeeps recovery gear, jackets, and daily-carry items off the floor and within reach\u003c\/li\u003e\n\u003cli\u003eFour hooks per pack for outfitting a full cargo area or drawer module\u003c\/li\u003e\n\u003cli\u003eTool-free install: insert into a slot and lock in place\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eUniversal fit for standard single-slot and double-slot L-Track systems following common airline\/L-Track slot spacing, including Grenadier cargo builds, drawer modules, our LoadSpan Sprinter rail L-Track channels, and trailer interiors. Not designed for E-Track, non-L-Track tie-down rails, or direct factory tie-down loops. If your rail profile is unknown, verify before ordering.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting type\u003c\/td\u003e\n\u003ctd\u003eRemovable L-Track stud-interface gear hook\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail standard\u003c\/td\u003e\n\u003ctd\u003eStandard single- and double-slot L-Track \/ airline track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustability\u003c\/td\u003e\n\u003ctd\u003eRepositionable along the rail, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e4 hooks per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLT-4-GH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e4 x adjustable L-Track gear hooks (rails, hardware, and straps not included)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan I move the hooks after installing?\u003c\/strong\u003e\u003cbr\u003e\nYes. Each hook is designed for quick repositioning along the rail. Unlock, slide it to a new slot, and relock, all without tools or drilling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they stay put off-road?\u003c\/strong\u003e\u003cbr\u003e\nProperly locked hooks stay secure through trail use and vibration. Confirm each hook is fully seated and locked before loading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat L-Track do they fit?\u003c\/strong\u003e\u003cbr\u003e\nStandard single-slot and double-slot L-Track with airline-style slot spacing. They are not for E-Track or non-L-Track rails, and are not meant for direct factory tie-down loops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much can each hook hold?\u003c\/strong\u003e\u003cbr\u003e\nRating depends on your full rail install and hardware condition. Do not exceed the lowest-rated component in your system, and keep heavy or critical loads on rated tie-down anchors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these good for a Grenadier interior build?\u003c\/strong\u003e\u003cbr\u003e\nYes. They pair well with L-Track added to Grenadier cargo builds, drawer modules, and utility rails to hang gear that would otherwise slide around the load area.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024302551343,"sku":"LT-4-GH","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/l-track-adjustable-gear-hook-4-pack-3234202.jpg?v=1774973935"},{"product_id":"exterior-powervault-ineos-grenadier-utility-power-hub","title":"INEOS Grenadier: PowerVault™ Utility Hub R2","description":"\u003cp\u003eThe PowerVault Utility Hub R2 turns your INEOS Grenadier's factory DTP rooftop outlet into a full charging station you can stick anywhere on the truck. It plugs into an EXT port through the included DTP-to-Anderson cable, then delivers laptop-grade USB-C, fast USB-A, and a 12V socket from a rugged, weatherproof enclosure. Four industrial magnets let you snap it to a door, swing-out, or body panel with no drilling and no permanent wiring.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo USB-C ports rated 65W each — enough to charge a MacBook or fast-charge phones and tablets in the field\u003c\/li\u003e\n\u003cli\u003eTwo USB-A ports rated 22.5W each for quick top-ups of legacy devices\u003c\/li\u003e\n\u003cli\u003eOne 12V cigarette-lighter-style socket for fridges, air pumps, and other 12V accessories\u003c\/li\u003e\n\u003cli\u003eIntegrated flashlight with an on\/off switch for camp and after-dark tasks\u003c\/li\u003e\n\u003cli\u003eFour industrial-strength magnets mount it to any steel surface and reposition instantly\u003c\/li\u003e\n\u003cli\u003eWeatherproof enclosure with IP65-rated connectors shrugs off dust, mud, and rain\u003c\/li\u003e\n\u003cli\u003eRuns entirely off factory power — no drilling, no splicing, no permanent wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eBuilt for the INEOS Grenadier (Station Wagon and Quartermaster) with factory DTP rooftop power. The included 1-meter DTP-to-Anderson cable plugs into an EXT2 or EXT3 outlet, so no vehicle-side wiring changes are needed. Because it draws from the factory DTP circuit, total available current is governed by the vehicle-side DTP fuse rather than any modification to your rig.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB-C output\u003c\/td\u003e\n\u003ctd\u003e2 ports, 65W per port (MacBook capable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB-A output\u003c\/td\u003e\n\u003ctd\u003e2 ports, 22.5W per port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12V output\u003c\/td\u003e\n\u003ctd\u003e1 cigarette-lighter-style socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting\u003c\/td\u003e\n\u003ctd\u003eIntegrated switch-activated flashlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connector\u003c\/td\u003e\n\u003ctd\u003eAnderson, via included 1m DTP-to-Anderson cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower source\u003c\/td\u003e\n\u003ctd\u003eGrenadier factory DTP port (EXT2 \/ EXT3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003e4 industrial-strength magnets, repositionable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeather rating\u003c\/td\u003e\n\u003ctd\u003eIP65-rated connectors; dust, mud, and rain resistant (not rated for submersion)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFusing\u003c\/td\u003e\n\u003ctd\u003eNo hub-side fuse required; output limited by vehicle-side DTP fuse capacity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x PowerVault Utility Hub R2 enclosure with all outputs\u003c\/li\u003e\n\u003cli\u003e1x 1-meter DTP-to-Anderson power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the PowerVault get power on the Grenadier?\u003c\/strong\u003e\u003cbr\u003e\nIt connects to a factory DTP rooftop outlet (EXT2 or EXT3) using the included 1-meter DTP-to-Anderson cable. There is no cutting, splicing, or permanent wiring — the connection is fully reversible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it charge a laptop?\u003c\/strong\u003e\u003cbr\u003e\nYes. Each of the two USB-C ports delivers up to 65W, which is enough to power a MacBook or other USB-C PD laptops, plus fast-charge phones and tablets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e\u003cbr\u003e\nFour industrial-strength magnets hold it to any steel surface — a door, a rear swing-out, or a body panel — and let you reposition it in seconds with no drilling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it waterproof?\u003c\/strong\u003e\u003cbr\u003e\nThe enclosure is weatherproof and uses IP65-rated connectors, so it handles dust, mud, and rain. It is not rated for submersion, so avoid dunking it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat limits how much power I can pull?\u003c\/strong\u003e\u003cbr\u003e\nThe PowerVault itself needs no additional fuse. Total available current is set by the vehicle-side DTP fuse on the EXT port you connect to.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need any extra cables or adapters?\u003c\/strong\u003e\u003cbr\u003e\nNo. The DTP-to-Anderson cable is included, so it is plug-and-play. If you want to reach a farther port you can pair it with our \u003ca href=\"https:\/\/nvmos.com\/products\/dtp-06-2s-to-anderson-50a-3-meter\"\u003eDTP-06-2S to Anderson SB50 cable\u003c\/a\u003e.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024304025903,"sku":"I-PWR-PV","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-powervault-utility-hub-r2-1519876.jpg?v=1774973938"},{"product_id":"side-step-for-ineos-grenadier","title":"INEOS Grenadier: Side Steps (Set of 2)","description":"\u003cp\u003eReaching the roof rack, cleaning the windshield, or climbing into a rooftop tent gets a lot easier with this pair of fold-away steps for the INEOS Grenadier. Each SideStep bolts onto the rear door hinge bolts, so there's no drilling and nothing permanent, and a spring-loaded lock holds it firmly whether it's stowed flat or deployed for a boost. Cold-rolled steel and aggressive grip teeth give you sure footing in wet, muddy, and off-road conditions.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMounts directly to the rear door hinge bolts with no drilling or permanent modification\u003c\/li\u003e\n\u003cli\u003eSpring-loaded locking action holds the step secure in both stowed and deployed positions\u003c\/li\u003e\n\u003cli\u003eCold-rolled steel with a corrosion-resistant matte black powder coat\u003c\/li\u003e\n\u003cli\u003eAggressive grip teeth machined into the step surface for traction in wet and muddy conditions\u003c\/li\u003e\n\u003cli\u003eRated for adult weight to support roof access, RTT entry, and cargo loading\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment using the existing hardware interface, roughly 30 minutes per side\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier in both Wagon and Quartermaster variants, since the rear door hinge bolt pattern is shared across the two. Installation is fully reversible to stock. Looking for hands-free, auto-deploying boards instead? See our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-electric-power-side-steps-with-led\"\u003eelectric power side steps with LED\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCold-rolled steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatte black powder coat, textured and corrosion-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStep surface\u003c\/td\u003e\n\u003ctd\u003eAggressive machined grip teeth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocking\u003c\/td\u003e\n\u003ctd\u003eSpring-loaded, stowed and deployed positions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eRear door hinge bolts, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eSet of 2 (driver and passenger side)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall time\u003c\/td\u003e\n\u003ctd\u003eApproximately 30 minutes per side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x SideStep units (driver and passenger side)\u003c\/li\u003e\n\u003cli\u003eMounting hardware for the hinge bolt interface\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhere do these steps mount?\u003c\/strong\u003e\u003cbr\u003e\nEach step bolts to the rear door hinge bolts of the Grenadier. The install uses the existing hardware interface, so there's no drilling or permanent modification, and it's reversible to stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they fit the Quartermaster as well as the Wagon?\u003c\/strong\u003e\u003cbr\u003e\nYes. The rear door hinge bolt pattern is the same on both the Wagon and Quartermaster, so the SideSteps fit both.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the step stay put when I'm not standing on it?\u003c\/strong\u003e\u003cbr\u003e\nYes. A spring-loaded locking action holds the step securely in both the stowed and deployed positions, so it won't flop around on the trail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre they slippery when wet?\u003c\/strong\u003e\u003cbr\u003e\nNo. The step surface has aggressive grip teeth machined into it for traction in wet, muddy, and off-road conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are these steps mainly for?\u003c\/strong\u003e\u003cbr\u003e\nThey give you a solid foothold for reaching the roof rack, entering a rooftop tent, cleaning the windshield, or loading cargo up top.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024307630383,"sku":"I-SS-L","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-side-steps-set-of-2-3493252.jpg?v=1774973944"},{"product_id":"dtp-06-2s-to-anderson-50a-3-meter","title":"INEOS Grenadier: DTP-06-2S to Anderson SB50","description":"\u003cp\u003eConvert your INEOS Grenadier's factory DTP power outlet into a rugged Anderson SB50 connection. This heavy-gauge adapter takes the vehicle-side DTP-06-2S port and terminates it in a fast-connect Anderson SB50, the go-to connector for portable power stations, solar panels, fridges, and other high-draw 12V field equipment. The 12 AWG conductor and IP65-sealed DTP end make it a clean, no-splice way to feed quick-disconnect gear straight from the Grenadier's rooftop or accessory power.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDTP-06-2S input plugs directly into the Grenadier's factory DTP power system — no wiring modification\u003c\/li\u003e\n\u003cli\u003eAnderson SB50 output for robust, high-current, quick-connect\/disconnect use\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 12 AWG conductor rated for up to 15A continuous at 12V DC\u003c\/li\u003e\n\u003cli\u003eSealed, locking DTP connector rated to IP65 for permanent vehicle integration\u003c\/li\u003e\n\u003cli\u003eTwo lengths — 1 meter or 3 meter — to match how far your gear sits from the port\u003c\/li\u003e\n\u003cli\u003eField-service friendly for power distribution and portable equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2023–present) and any vehicle or mobile power system with a DTP-06-2S power outlet. Before use, confirm the source circuit's fuse capacity is appropriate for your load. It is not intended for direct battery connection without proper fuse protection.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connector\u003c\/td\u003e\n\u003ctd\u003eDTP-06-2S (vehicle-side)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connector\u003c\/td\u003e\n\u003ctd\u003eAnderson SB50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire gauge\u003c\/td\u003e\n\u003ctd\u003e12 AWG heavy-duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating\u003c\/td\u003e\n\u003ctd\u003e12V DC, 15A maximum continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLengths available\u003c\/td\u003e\n\u003ctd\u003e1 meter or 3 meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (sealed DTP connector)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e142 g (1 m) \/ 255 g (3 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1× DTP-06-2S to Anderson SB50 cable in the selected length\u003c\/li\u003e\n\u003cli\u003eNo inline fuse kit, battery terminals, or distribution block included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich DTP cable do I need for a fridge or portable power station?\u003c\/strong\u003e\u003cbr\u003e\nThis one. The Anderson SB50 is the standard high-current connector for fridges, inverters, battery chargers, and solar gear, and the 12 AWG conductor handles those loads up to 15A. For lower-current lights use a Weather Pack or IP65 cable instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich length should I choose?\u003c\/strong\u003e\u003cbr\u003e\nPick 1 meter when the equipment sits close to the port and 3 meter when you need to reach across the roof or into the cargo area. Both use the same 12 AWG conductor and connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to add a fuse?\u003c\/strong\u003e\u003cbr\u003e\nThe cable relies on the vehicle-side DTP circuit's existing fuse; no inline fuse is included. Never wire the Anderson end directly to a battery without adding proper fuse protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it to power a magnetic utility hub?\u003c\/strong\u003e\u003cbr\u003e\nYes. It's the same DTP-to-Anderson connection used to feed our \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-powervault-ineos-grenadier-utility-power-hub\"\u003ePowerVault Utility Hub\u003c\/a\u003e, which draws power through an Anderson SB50.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much current can it carry?\u003c\/strong\u003e\u003cbr\u003e\nUp to 15A continuous at 12V DC. Keep your accessory's draw within that figure and within the source DTP circuit's fuse rating.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"1 Meter","offer_id":56024309760303,"sku":"I-PWR-DA3","price":35.0,"currency_code":"USD","in_stock":true},{"title":"3 Meter","offer_id":56024309793071,"sku":"I-PWR-DA4","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/dva-dtp-06-2s-to-anderson-sb50-3-meter-for-ineos-grenadier-3539394.jpg?v=1774973948"},{"product_id":"dtp04-2p-female-to-ip65-waterproof-connector-cable-3-meters","title":"INEOS Grenadier: DTP04-2P Female to IP65 Waterproof Connector Cable – 3 Meters","description":"\u003cp\u003eThis 3-meter extension carries power from a DTP04-2P female source out to a sealed IP65 accessory connector, giving your INEOS Grenadier a long, weatherproof run with no hard-splicing. It's the cable you reach for when the accessory is far from the power tap — routing from an interior or under-hood DTP source down to a front bumper light, an air compressor, or camp gear at the back. One end accepts a DTP04-2P male feed; the other terminates in a 2-pin IP65 waterproof plug ready for your exterior device.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDTP04-2P female input mates with DTP04-2P male sources from splitters, harnesses, or other DTP components\u003c\/li\u003e\n\u003cli\u003e2-pin IP65 waterproof output connector resists dust and water spray for exposed exterior mounting\u003c\/li\u003e\n\u003cli\u003eFull 3-meter (about 10 ft) run for reaching front bumper, rear, or roof accessories from a protected source\u003c\/li\u003e\n\u003cli\u003e16 AWG copper core sized for continuous 12V accessory loads\u003c\/li\u003e\n\u003cli\u003eUV- and abrasion-resistant automotive jacket built for permanent, exposed routing paths\u003c\/li\u003e\n\u003cli\u003eSealed, serviceable connection — no cutting into factory wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned for INEOS Grenadier (2023–present) DTP power builds. It connects any DTP04-2P female source to a 2-pin IP65 accessory over a 3-meter run. Commonly used between under-hood or interior-protected source points and front bumper auxiliary loads. It is not intended for incompatible pinouts or for unfused direct-battery feeds; confirm your accessory's voltage, current, and connector pinout before installing.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3 meters (approx. 10 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connector\u003c\/td\u003e\n\u003ctd\u003eDTP04-2P female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connector\u003c\/td\u003e\n\u003ctd\u003e2-pin IP65 waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire gauge\u003c\/td\u003e\n\u003ctd\u003e16 AWG copper core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (dust and water-spray resistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable jacket\u003c\/td\u003e\n\u003ctd\u003eUV\/abrasion-resistant automotive insulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1× DTP04-2P female to IP65 cable assembly, 3 m length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow is this different from the DTP-06-2S to IP65 cable?\u003c\/strong\u003e\u003cbr\u003e\nThis cable's input is a DTP04-2P \u003cem\u003efemale\u003c\/em\u003e, so it plugs onto a DTP04-2P male feed — typically the output leg of a splitter or harness rather than the rooftop port itself. If you want to go straight from a factory rooftop DTP-06-2S port to an IP65 accessory, use our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-dtp-to-ip65-power-cable-awg16\"\u003eDTP-06-2S to IP65 waterproof connector cable\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat plugs into the DTP04-2P female end?\u003c\/strong\u003e\u003cbr\u003e\nAny DTP04-2P male source. That includes the female output legs of our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-dtp-06-2s-male-to-2-way-dtp04-2p-u-unbalanced-female-splitter\"\u003e2-way DTP splitters\u003c\/a\u003e once fitted with a mating male, or an accessory harness that presents a DTP04-2P male.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I shorten it?\u003c\/strong\u003e\u003cbr\u003e\nYes, a qualified installer can shorten the run, but the IP65 termination must be properly re-sealed afterward to keep its weather rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the IP65 connector submersible?\u003c\/strong\u003e\u003cbr\u003e\nNo. IP65 resists dust and pressurized water spray, which covers rain, washdowns, and trail conditions, but it is not rated for prolonged submersion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include a fuse or switch?\u003c\/strong\u003e\u003cbr\u003e\nNo. It's a power-routing cable only — no switch relay harness, fuse block, or accessory device is included. Feed it from a properly fused source.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024311562543,"sku":"I-PWR-DI3","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/dtp04-2p-female-to-ip65-waterproof-connector-cable-3-meters-8124810.jpg?v=1774973952"},{"product_id":"ineos-grenadier-rooftop-power-adapter-dtp-to-weather-pack-18","title":"INEOS Grenadier: DTP-06-2S to 2-Port Weather Pack Cable","description":"\u003cp\u003eConnect Weather Pack-equipped accessories to your INEOS Grenadier's factory rooftop power without cutting or modifying a single wire. This short 18-inch adapter takes a DTP-06-2S male plug for the Grenadier's rooftop DTP port and breaks it out to two 2-pin Weather Pack male outputs, so you can feed a pair of medium-current accessories — work lights, auxiliary fans, or 12V camp equipment — from one EXT port. It's a true plug-and-play bridge between the factory Deutsch DTP standard and the common Weather Pack connector.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDTP-06-2S male input sized for the Grenadier's factory rooftop DTP outlet\u003c\/li\u003e\n\u003cli\u003eTwo 2-pin Weather Pack male outputs to run a pair of accessories from one port\u003c\/li\u003e\n\u003cli\u003eCompact 18-inch length keeps the connection tidy right at the port\u003c\/li\u003e\n\u003cli\u003eIP65 weatherproof connectors for confident exterior use\u003c\/li\u003e\n\u003cli\u003e12V DC, 15A total capacity across both outputs\u003c\/li\u003e\n\u003cli\u003eNo splicing, cutting, or crimping — factory wiring stays intact and reversible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits INEOS Grenadier (2023–present) models with factory rooftop DTP power ports, all trims. It's intended for accessories that use, or can be fitted with, a 2-pin Weather Pack connector. Combined draw of both outputs must stay within the source EXT port's fuse rating.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connector\u003c\/td\u003e\n\u003ctd\u003eDTP-06-2S male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connectors\u003c\/td\u003e\n\u003ctd\u003e2× Weather Pack 2-pin male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e18 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating\u003c\/td\u003e\n\u003ctd\u003e12V DC, 15A total capacity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (weatherproof connectors)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug \u0026amp; play, no splicing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1× DTP-06-2S male to 2-port Weather Pack 2-pin male adapter cable (18\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich DTP cable do I need if my accessory uses a Weather Pack connector?\u003c\/strong\u003e\u003cbr\u003e\nThis one. It's the direct bridge from the Grenadier's DTP-06-2S rooftop port to Weather Pack 2-pin accessories, and it gives you two outputs for medium-current gear like LED light bars, fans, and pumps. For an Anderson SB50 device pick the \u003ca href=\"https:\/\/nvmos.com\/products\/dtp-06-2s-to-anderson-50a-3-meter\"\u003eDTP to Anderson SB50 cable\u003c\/a\u003e; for a sealed IP65 device use a \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-dtp-to-ip65-power-cable-awg16\"\u003eDTP to IP65 cable\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it split one port into two?\u003c\/strong\u003e\u003cbr\u003e\nYes. A single DTP-06-2S input feeds two Weather Pack outputs, so you can run two accessories from one rooftop port without adding a separate splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I have to modify any factory wiring?\u003c\/strong\u003e\u003cbr\u003e\nNo. The DTP end plugs into the factory rooftop port and your accessories plug into the Weather Pack outputs. Nothing is cut or spliced, and it unplugs to return to stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much can it carry?\u003c\/strong\u003e\u003cbr\u003e\n12V DC with 15A total across both outputs. Keep the combined accessory draw within that figure and within the source port's fuse rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I need more DTP outputs elsewhere on the roof?\u003c\/strong\u003e\u003cbr\u003e\nAdd a \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-dtp06-power-splitter-cable-waterproof\"\u003eDTP to IP65 waterproof splitter\u003c\/a\u003e or one of our other \u003ca href=\"https:\/\/nvmos.com\/collections\/ineos-grenadier\"\u003eGrenadier DTP power adapters\u003c\/a\u003e to expand another port.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024313397551,"sku":"I-PWR-WP","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/dtp-06-2s-to-2-port-weather-pack-6794820.jpg?v=1774973955"},{"product_id":"rear-ladder-recovery-board-carrier-ineos-grenadier","title":"INEOS Grenadier: Ladder-Mounted Recovery Board Carrier – MaxTrax MKII \u0026 Lite","description":"\u003cp\u003eCarry your traction boards where they belong on an expedition rig — off the roof and out of the cabin — with a carrier engineered around the INEOS Grenadier's factory rear ladder. The mount brackets bolt straight to the ladder rungs with no drilling, then hold MaxTrax-style boards flat against the tailgate so they ride silent and rattle-free until a recovery calls for them. A tool-free quick-release pin set lets you pull the boards in seconds when you're stuck.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePurpose-built for the Grenadier's factory rear ladder geometry — no universal clamps or adapter plates\u003c\/li\u003e\n\u003cli\u003eBolt-on installation using the existing ladder rungs; no drilling or cutting of the vehicle\u003c\/li\u003e\n\u003cli\u003eTool-free quick-release pin system for fast board deployment when a recovery counts\u003c\/li\u003e\n\u003cli\u003eZero-rattle retention keeps boards locked flat and quiet on washboard, dunes, and rough trail\u003c\/li\u003e\n\u003cli\u003eHigh-strength anodized aluminum construction resists corrosion and overland abuse\u003c\/li\u003e\n\u003cli\u003eLeaves the ladder fully usable and the rear door accessible with the boards mounted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned specifically for the INEOS Grenadier (2023–present) equipped with the factory rear ladder. The carrier holds MaxTrax MKII, MaxTrax Lite, and similarly sized traction boards from other manufacturers. It is a ladder-mounted solution — if you run your boards on a roof rack or side rail instead, see our \u003ca href=\"https:\/\/nvmos.com\/products\/recovery-board-carrier\"\u003eUniversal Recovery Board Carrier\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-strength anodized aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting location\u003c\/td\u003e\n\u003ctd\u003eFactory rear ladder (INEOS Grenadier)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-on, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard access\u003c\/td\u003e\n\u003ctd\u003eTool-free quick-release pin system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard compatibility\u003c\/td\u003e\n\u003ctd\u003eMaxTrax MKII, MaxTrax Lite, and similar traction boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLadder-mounted recovery board carrier\u003c\/li\u003e\n\u003cli\u003eLadder mounting brackets\u003c\/li\u003e\n\u003cli\u003eQuick-release pin set\u003c\/li\u003e\n\u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich recovery boards fit this carrier?\u003c\/strong\u003e\u003cbr\u003e\nIt is built around MaxTrax MKII and MaxTrax Lite boards and accepts other traction boards of similar dimensions. It does not include the boards themselves.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require drilling into my Grenadier?\u003c\/strong\u003e\u003cbr\u003e\nNo. The brackets bolt directly to the factory rear ladder using the included hardware — no drilling, cutting, or permanent modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I still use the ladder and open the rear door with boards mounted?\u003c\/strong\u003e\u003cbr\u003e\nYes. The carrier is positioned to keep the ladder climbable and the rear door operable while the boards are stowed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow quickly can I get the boards off in a recovery?\u003c\/strong\u003e\u003cbr\u003e\nThe tool-free quick-release pins let you free the boards in seconds without hunting for a wrench or ratchet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003e\nHigh-strength anodized aluminum, chosen for corrosion resistance and light weight so it does not add meaningful mass to the rear of the vehicle.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024315199791,"sku":"I-RL-RC","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/rear-ladder-mounted-recovery-board-carrier-for-ineos-grenadier-fits-maxtrax-mkii-lite-more-1081378.jpg?v=1774973958"},{"product_id":"20l-nato-jerry-can-carrier-for-side-mount-rails","title":"20L NATO Jerry Can Carrier for Side \u0026 Rear-Ladder Accessory Carriers","description":"\u003cp\u003eThe 20L NATO Jerry Can Carrier bolts a full reserve fuel can to the outside of your INEOS Grenadier, freeing cabin and cargo space for gear instead of fluids. A powder-coated steel cradle with vibration-damping rubber isolators keeps a NATO-pattern can clamped down and rattle-free over washboard and rock. It attaches to either the Grenadier's Side Accessory Carrier or the Rear-Ladder Accessory Carrier, so you can position fuel wherever your build makes sense.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePowder-coated steel construction for corrosion resistance and long service life\u003c\/li\u003e\n\u003cli\u003eVibration-damping rubber isolators eliminate can rattle on rough terrain\u003c\/li\u003e\n\u003cli\u003eQuick-release latch lets you lift the can out for refueling in seconds\u003c\/li\u003e\n\u003cli\u003eMounts to the Side Accessory Carrier or Rear-Ladder Accessory Carrier (sold separately)\u003c\/li\u003e\n\u003cli\u003eSized for standard 20L NATO-pattern steel jerry cans\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no drilling into the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eBuilt to mount onto the Grenadier's \u003ca href=\"https:\/\/nvmos.com\/products\/side-accessory-carrier-for-ineos-grenadier-gen-2\"\u003eSide Accessory Carrier\u003c\/a\u003e or \u003ca href=\"https:\/\/nvmos.com\/products\/rear-ladder-mounted-accessory-carrier-for-ineos-grenadier-gen2\"\u003eRear-Ladder Accessory Carrier\u003c\/a\u003e rather than directly to the body, so it works across INEOS Grenadier (2023-present) builds already running one of those carriers. Note it is sized only for NATO-pattern steel cans; plastic utility cans and non-standard aftermarket geometries will not seat correctly.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePowder-coated steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRetention\u003c\/td\u003e\n\u003ctd\u003eVibration-damping rubber isolators, quick-release latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCan compatibility\u003c\/td\u003e\n\u003ctd\u003e20L NATO-pattern steel jerry can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 6.8 lb (3,093 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eSide Accessory Carrier or Rear-Ladder Accessory Carrier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-on, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e20L jerry can carrier assembly\u003c\/li\u003e\n\u003cli\u003eRetention hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003cli\u003eNote: jerry can, fuel, and accessory carrier are not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this include the 20L jerry can?\u003c\/strong\u003e\u003cbr\u003e\nNo, this is the carrier only. You will need a standard 20L NATO-pattern steel jerry can, purchased separately; the cradle is built around NATO can dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the carrier attach to?\u003c\/strong\u003e\u003cbr\u003e\nIt mounts to the Grenadier Side Accessory Carrier or the Rear-Ladder Accessory Carrier (both sold separately), not directly to the vehicle body.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it hold a plastic fuel or water can?\u003c\/strong\u003e\u003cbr\u003e\nNo. It is shaped for NATO-pattern steel cans. Plastic utility cans and off-spec aftermarket cans will not seat or latch correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the can rattle on rough roads?\u003c\/strong\u003e\u003cbr\u003e\nRubber isolators and a quick-release latch keep the can clamped and quiet over washboard and trail while still allowing fast access.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to drill anything?\u003c\/strong\u003e\u003cbr\u003e\nNo. It is a bolt-on install onto the accessory carrier rails using the supplied hardware.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024317722927,"sku":"I-JC-Holder","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/20l-nato-jerry-can-carrier-for-side-rear-ladder-accessory-carriers-236421.jpg?v=1774973962"},{"product_id":"side-accessory-carrier-for-ineos-grenadier-gen-2","title":"INEOS Grenadier: Side Accessory Carrier, Gen 2","description":"\u003cp\u003eThe Gen 2 Side Accessory Carrier bridges your INEOS Grenadier's factory roof rails down to the L-Track utility belt, creating a full-length vertical mounting rail along each side of the vehicle. Machined from black anodized 6061 aluminum, it converts dead body-panel space into organized, accessible gear storage for jerry cans, recovery boards, and more, with zero drilling and zero rattle.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachined black anodized 6061 aluminum, lightweight and corrosion-proof\u003c\/li\u003e\n\u003cli\u003e25 lb load rating per rail, engineered for heavy or offset loads\u003c\/li\u003e\n\u003cli\u003eBridges factory roof rails to the L-Track utility belt for a continuous side mounting surface\u003c\/li\u003e\n\u003cli\u003eLower-profile Gen 2 design reduces wind noise and fuel-economy impact\u003c\/li\u003e\n\u003cli\u003e100% bolt-on in under 30 minutes with no drilling\u003c\/li\u003e\n\u003cli\u003eOffered in 1-, 2-, and 4-rail kits to match your build\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier Station Wagon (2021-2026, all trims). It is not compatible with the Quartermaster pickup. The carrier mounts to the factory roof rails and the Grenadier L-Track utility belt using the included brackets, so you will want the utility belt installed. No modifications to the vehicle are required.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eBlack anodized 6061 aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad rating\u003c\/td\u003e\n\u003ctd\u003e25 lb per rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit options\u003c\/td\u003e\n\u003ctd\u003e1-rail, 2-rail, 4-rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e680 g (1-rail) \/ 1,706 g (2-rail) \/ 3,856 g (4-rail)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFactory roof rails and L-Track utility belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003e100% bolt-on, under 30 min, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eGrenadier Station Wagon 2021-2026 (not Quartermaster)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGen 2 side accessory carrier rail(s) per selected kit\u003c\/li\u003e\n\u003cli\u003eCustom roof bracket\u003c\/li\u003e\n\u003cli\u003eIntegrated L-Track mounting bolt\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can each rail hold?\u003c\/strong\u003e\u003cbr\u003e\nEach rail is rated to 25 lb, engineered to stay solid even with heavy or offset overland loads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does it mount to?\u003c\/strong\u003e\u003cbr\u003e\nIt spans the factory roof rails and the L-Track utility belt, so the utility belt should be installed. Installation is 100% bolt-on with no drilling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich kit should I choose?\u003c\/strong\u003e\u003cbr\u003e\nPick 1-, 2-, or 4-rail based on how much gear you carry. The 2- and 4-rail kits give you more mounting points per side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit the Grenadier Quartermaster?\u003c\/strong\u003e\u003cbr\u003e\nNo. It is designed for the Grenadier Station Wagon (2021-2026) and is not compatible with the Quartermaster pickup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat accessories can I mount on it?\u003c\/strong\u003e\u003cbr\u003e\nIt accepts our \u003ca href=\"https:\/\/nvmos.com\/products\/20l-nato-jerry-can-carrier-for-side-mount-rails\"\u003e20L NATO Jerry Can Carrier\u003c\/a\u003e, recovery board carriers, and other side-mount overland accessories.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"2-Rail Kit","offer_id":56024319459631,"sku":"I-WM-2-V2","price":179.0,"currency_code":"USD","in_stock":true},{"title":"4-Rail Kit","offer_id":56024319492399,"sku":"I-WM-4-V2","price":299.0,"currency_code":"USD","in_stock":true},{"title":"1-Rail Kit","offer_id":56024319525167,"sku":"I-WM-1-V2","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-side-accessory-carrier-gen-2-8074664.jpg?v=1774973965"},{"product_id":"rear-ladder-mounted-accessory-carrier-for-ineos-grenadier-gen2","title":"INEOS Grenadier: Ladder-Mounted Accessory Carrier – Modular Gear Mount, Gen 2","description":"\u003cp\u003eThe Gen 2 Ladder-Mounted Accessory Carrier turns your INEOS Grenadier's factory rear ladder into a modular gear-hauling platform. Its bracket-and-rail system accepts jerry cans, MOLLE panels, recovery boards, and other overland essentials from a single mount while leaving the ladder fully climbable. Bolt it on once, then reconfigure your load-out as each trip demands.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModular bracket-and-rail platform mounts directly to the Grenadier's factory rear ladder\u003c\/li\u003e\n\u003cli\u003eCarries jerry cans, MOLLE panels, recovery boards, and other overland gear from one mount\u003c\/li\u003e\n\u003cli\u003ePositioned to keep the rungs accessible so the ladder stays fully usable\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant construction built for sustained trail and weather exposure\u003c\/li\u003e\n\u003cli\u003eShips with all mounting hardware for a fast, hassle-free bolt-on setup\u003c\/li\u003e\n\u003cli\u003eGen 2 revision with improved fit and modularity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2023-present) equipped with the factory rear ladder. The carrier clamps to the ladder itself, so there is no drilling into the body. It concentrates gear at the tailgate; owners who also want gear along the vehicle's flanks often add the \u003ca href=\"https:\/\/nvmos.com\/products\/side-accessory-carrier-for-ineos-grenadier-gen-2\"\u003eSide Accessory Carrier\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount location\u003c\/td\u003e\n\u003ctd\u003eFactory rear ladder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eCorrosion-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarries\u003c\/td\u003e\n\u003ctd\u003eJerry cans, MOLLE panels, recovery boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGeneration\u003c\/td\u003e\n\u003ctd\u003eGen 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-on to ladder, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGen 2 ladder-mounted accessory carrier\u003c\/li\u003e\n\u003cli\u003eModular bracket and rail system\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan I still use the ladder with the carrier installed?\u003c\/strong\u003e\u003cbr\u003e\nYes. The carrier is positioned to keep the rungs accessible, so the ladder remains fully climbable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I mount to it?\u003c\/strong\u003e\u003cbr\u003e\nJerry cans, MOLLE panels, recovery boards, and similar overland gear. Add reserve fuel by pairing it with our \u003ca href=\"https:\/\/nvmos.com\/products\/20l-nato-jerry-can-carrier-for-side-mount-rails\"\u003e20L NATO Jerry Can Carrier\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it require drilling?\u003c\/strong\u003e\u003cbr\u003e\nNo. It bolts to the Grenadier's factory rear ladder using the included hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the ladder carrier or the side carrier?\u003c\/strong\u003e\u003cbr\u003e\nThe ladder carrier concentrates gear at the rear door, while the Side Accessory Carrier spreads it along the vehicle's sides. Many owners run both for maximum external storage.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024321392943,"sku":"I-RLM-JC-V2","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/rear-ladder-mounted-universal-accessory-carrier-for-ineos-grenadier-gen-2-998070.jpg?v=1774973968"},{"product_id":"recovery-board-carrier","title":"Recovery Board Carrier - Universal Mount - MaxTrax MKII \u0026 Lite","description":"\u003cp\u003eA single-rail traction board carrier that bolts to virtually any roof rack or side accessory rail and locks MaxTrax-style boards down without rattle. The low-profile aluminum rail carries recovery boards flat and secure, freeing up roof deck space and keeping muddy boards outside the cabin. Because it isn't tied to one vehicle, it moves with your build — roof rack today, side rail tomorrow.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal fit — bolts to DualTrack roof rails, side accessory rails, or any standard roof rack system\u003c\/li\u003e\n\u003cli\u003ePrecision-fit retention for MaxTrax MKII, MaxTrax Lite, and other standard traction board sizes\u003c\/li\u003e\n\u003cli\u003eLow-profile, zero-rattle design eliminates board movement and noise at highway speed\u003c\/li\u003e\n\u003cli\u003eHigh-strength anodized aluminum resists corrosion and trail abuse at roughly 4.2 lb\u003c\/li\u003e\n\u003cli\u003eCustom-fit quick-release pin set for tool-free board access when recovery counts\u003c\/li\u003e\n\u003cli\u003eNo drilling or complex modification required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eThis is a universal-mount carrier, not vehicle-specific. It bolts to our \u003ca href=\"https:\/\/nvmos.com\/products\/dualtrack-roof-rail-ineos-grenadier\"\u003eDualTrack roof rails\u003c\/a\u003e, our \u003ca href=\"https:\/\/nvmos.com\/products\/side-accessory-carrier-for-ineos-grenadier-gen-2\"\u003eside accessory carrier rails\u003c\/a\u003e, or most standard aftermarket roof rack systems. It holds MaxTrax MKII, MaxTrax Lite, and other traction boards of comparable dimensions. For Grenadier owners who prefer to carry boards on the rear ladder, see our \u003ca href=\"https:\/\/nvmos.com\/products\/rear-ladder-recovery-board-carrier-ineos-grenadier\"\u003eLadder-Mounted Recovery Board Carrier\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-strength anodized aluminum, corrosion-resistant finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApproximately 1,905 g (4.2 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eBolt-on to roof rails, side rails, or standard roof racks; no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard access\u003c\/td\u003e\n\u003ctd\u003eCustom-fit quick-release pin set, tool-free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard compatibility\u003c\/td\u003e\n\u003ctd\u003eMaxTrax MKII, MaxTrax Lite, and similar traction boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal recovery board carrier rail\u003c\/li\u003e\n\u003cli\u003eCustom-fit mounting pin set\u003c\/li\u003e\n\u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I mount this carrier to?\u003c\/strong\u003e\u003cbr\u003e\nIt bolts to our DualTrack roof rails, side accessory rails, or any standard roof rack system, using the included hardware and no drilling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich traction boards does it fit?\u003c\/strong\u003e\u003cbr\u003e\nIt is engineered for MaxTrax MKII and MaxTrax Lite boards and accepts other traction boards of similar dimensions. Boards are not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much does it weigh?\u003c\/strong\u003e\u003cbr\u003e\nRoughly 1,905 grams, about 4.2 pounds — light enough that it adds negligible load to your rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the boards rattle on the trail?\u003c\/strong\u003e\u003cbr\u003e\nNo. The precision-fit, low-profile design clamps the boards down to eliminate movement and noise even on washboard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need tools to remove the boards?\u003c\/strong\u003e\u003cbr\u003e\nNo. The quick-release pin set lets you free the boards tool-free when a recovery situation arises.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024323162415,"sku":"P-MT-MS","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/recovery-board-carrier-universal-mount-maxtrax-mkii-lite-2932690.jpg?v=1774973972"},{"product_id":"dualtrack-roof-rail-ineos-grenadier","title":"INEOS Grenadier Crossbars: DualTrack™ Low-Profile Roof Crossbar System","description":"\u003cp\u003eThe DualTrack Low-Profile Crossbar System turns your INEOS Grenadier's roof into a fully modular platform, with two full-length rows of industry-standard L-Track machined into every bar. That dual-row layout lets you place cargo, lights, awnings, and recovery gear anywhere along the rail with no fixed positions and no adapter plates. Each bar is extruded from 6061-T6 aluminum in a black powder coat and sits at roughly a 1\" profile height, so the system stays low and clean while still clearing a standard 7-foot garage door.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo full-length rows of industry-standard L-Track per bar for precise, position-free accessory placement\u003c\/li\u003e\n\u003cli\u003eLow ~1\" profile height that keeps a loaded roof under a standard 7-foot garage door\u003c\/li\u003e\n\u003cli\u003e6061-T6 aluminum construction with a durable black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eFactory bolt-on to the Grenadier's roof attachment points, no drilling or permanent modification\u003c\/li\u003e\n\u003cli\u003eAvailable as a 2-bar or 4-bar kit; the 4-bar layout is roof-top-tent ready\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware and an installation video guide included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eConfirmed fit on the INEOS Grenadier Wagon and Quartermaster (2023 to present). It bolts directly to the factory roof attachment points and is fully reversible to stock. The 2-bar kit (SKU I-RR-DT) suits general cargo and accessory carrying, while the 4-bar kit (SKU I-RR-DT-4) adds front, dual-center, and rear bars for roof-top-tent and heavier build-outs.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial \/ finish\u003c\/td\u003e\n\u003ctd\u003e6061-T6 aluminum, black powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar length\u003c\/td\u003e\n\u003ctd\u003e58.5 in (149 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar width\u003c\/td\u003e\n\u003ctd\u003e3 in (7.6 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile height\u003c\/td\u003e\n\u003ctd\u003e~1 in (2.5 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight per bar\u003c\/td\u003e\n\u003ctd\u003e5 lb (2.3 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003eDual-row full-length industry-standard L-Track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad capacity (2-bar)\u003c\/td\u003e\n\u003ctd\u003e200 lb static \/ 100 lb dynamic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad capacity (4-bar)\u003c\/td\u003e\n\u003ctd\u003e400 lb static \/ 200 lb dynamic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eFactory bolt-on, no drilling, 45–60 min, reversible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 or 4 DualTrack aluminum crossbars (per kit selected)\u003c\/li\u003e\n\u003cli\u003eAluminum mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware kit\u003c\/li\u003e\n\u003cli\u003eInstallation video guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need adapter plates for L-Track accessories?\u003c\/strong\u003e\u003cbr\u003e\nNo. Two full-length rows of industry-standard L-Track are built into each bar, so L-Track sliders, tie-down rings, and gear hooks drop straight in and lock anywhere along the rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich kit do I need for a roof-top tent?\u003c\/strong\u003e\u003cbr\u003e\nThe 4-bar kit is recommended for roof-top tents and heavier loads; it adds front, two center, and rear bars and is rated to 400 lb static \/ 200 lb dynamic. The 2-bar kit is rated to 200 lb static \/ 100 lb dynamic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill my Grenadier still fit in the garage?\u003c\/strong\u003e\u003cbr\u003e\nThe bars sit at roughly a 1\" profile height and are designed to clear a standard 7-foot garage door, though your total clearance depends on what you have mounted on top.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes installation require drilling?\u003c\/strong\u003e\u003cbr\u003e\nNo. The system bolts to the Grenadier's factory roof attachment points with basic hand tools in about 45 to 60 minutes and is fully reversible to stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat accessories work with it?\u003c\/strong\u003e\u003cbr\u003e\nAny L-Track hardware. Pair it with our \u003ca href=\"https:\/\/nvmos.com\/products\/l-track-slider-for-dualtrack-roof-rails-ineos-grenadier-utility-belt\"\u003eL-Track sliders\u003c\/a\u003e, \u003ca href=\"https:\/\/nvmos.com\/products\/awning-mount-for-dualtrack-roof-rails\"\u003eDualTrack awning mounts\u003c\/a\u003e, and \u003ca href=\"https:\/\/nvmos.com\/products\/recovery-board-carrier\"\u003euniversal recovery board carrier\u003c\/a\u003e, or browse the full \u003ca href=\"https:\/\/nvmos.com\/collections\/ineos-grenadier\"\u003eGrenadier collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"4-Rail Kit","offer_id":56024325488943,"sku":"I-RR-DT-4","price":549.0,"currency_code":"USD","in_stock":true},{"title":"2-Rail Kit","offer_id":56024325521711,"sku":"I-RR-DT","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/DSC00037_91b76e3e-89dd-4cca-91d0-a68e364e3623.jpg?v=1774973975"},{"product_id":"rear-spoiler-gloss-black-fits-ineos-grenadier-wagon","title":"INEOS Grenadier: Rear Spoiler | Gloss Black","description":"\u003cp\u003eSharpen the back end of your INEOS Grenadier Wagon with a gloss black rear spoiler that looks like it rolled off the factory line. Molded from automotive-grade ABS with a deep, UV-stable gloss finish, it's shaped specifically for the Wagon's roofline and installs with no drilling using pre-applied-style automotive tape. It's a clean styling upgrade that pairs with the Grenadier's blacked-out trim without permanent modification.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive-grade ABS construction that's impact-resistant and UV-stable\u003c\/li\u003e\n\u003cli\u003eDeep gloss black finish that complements the Grenadier's factory trim pieces\u003c\/li\u003e\n\u003cli\u003eNo-drill, adhesive install using automotive-grade double-sided tape\u003c\/li\u003e\n\u003cli\u003eCustom-shaped for the Grenadier Wagon roofline for a true factory-style fit\u003c\/li\u003e\n\u003cli\u003eReversible: removes cleanly with heat and leaves no paint damage when installed correctly\u003c\/li\u003e\n\u003cli\u003eIncludes an adhesion promoter wipe for a strong, lasting bond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier Wagon (2023 and newer) only. It is custom-shaped to the Wagon roofline and does not fit the Quartermaster. For the best bond, install at a minimum surface temperature of 70°F (21°C) on a clean, wax-free surface and allow 24 hours to cure before driving.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAutomotive-grade ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGloss black, UV-stable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo-drill, automotive-grade double-sided tape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApproximately 4 kg (4,001 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall temperature\u003c\/td\u003e\n\u003ctd\u003e70°F \/ 21°C minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCure time\u003c\/td\u003e\n\u003ctd\u003e24 hours before driving\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eGrenadier Wagon (2023+), not Quartermaster\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x rear spoiler in gloss black\u003c\/li\u003e\n\u003cli\u003eAutomotive-grade double-sided tape\u003c\/li\u003e\n\u003cli\u003eAdhesion promoter wipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the spoiler require drilling?\u003c\/strong\u003e\u003cbr\u003e\nNo. It mounts with automotive-grade double-sided tape and an adhesion promoter wipe, so there's no drilling or permanent modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my Quartermaster?\u003c\/strong\u003e\u003cbr\u003e\nNo. The spoiler is custom-shaped to the Grenadier Wagon roofline (2023 and newer) and does not fit the Quartermaster.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I install it for the best bond?\u003c\/strong\u003e\u003cbr\u003e\nInstall on a clean, wax-free surface at a minimum of 70°F (21°C), then let it cure for 24 hours before driving.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I remove it later without damaging the paint?\u003c\/strong\u003e\u003cbr\u003e\nYes. When installed correctly, it removes cleanly with heat and is fully reversible without paint damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003e\nIt's molded from automotive-grade ABS with a UV-stable, impact-resistant gloss black finish that matches the Grenadier's factory trim.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Black","offer_id":56024327356719,"sku":"I-RS-B","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-rear-spoiler-gloss-black-8592224.jpg?v=1774973979"},{"product_id":"starlink-mini-roof-mount-v2-ineos-grenadier-kickstand","title":"Starlink Mini Roof Rack Mount v2 – Universal Roof Rack Fit with Anti-Theft Kickstand","description":"\u003cp\u003eGet your Starlink Mini off the dashboard and onto the rack with a mount that fits nearly any modular roof rail. This v2 platform clamps directly into common rack channels and holds the Mini rock-steady through vibration, washboard, and repeated repositioning, while an integrated kickstand sets a clean angle to the sky. Two anti-theft screws lock it all down so the dish stays put whether you're parked at a trailhead or rolling down the highway.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePurpose-built cradle for the Starlink Mini dish — not a generic antenna tray\u003c\/li\u003e\n\u003cli\u003eFits three rack standards: 20×20 T-slot, L-Track channel, and small-format T-slot\u003c\/li\u003e\n\u003cli\u003eIntegrated kickstand gives controlled angle adjustment for a clear sky view\u003c\/li\u003e\n\u003cli\u003eDual anti-theft security screws deter casual tampering and walk-off theft\u003c\/li\u003e\n\u003cli\u003eBlack anodized aluminum construction built for permanent exterior mounting\u003c\/li\u003e\n\u003cli\u003eClamp-on, no-drill installation with threadlocker on the final fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eUniversal fit for the Starlink Mini on most aftermarket roof racks. The kit ships with hardware sets for all three supported channel formats — 20×20 T-slot, L-Track, and small-format T-slot — so it adapts to the majority of modular rack profiles without adapters. It is designed for the Starlink Mini specifically; it does not fit the standard or larger Starlink dishes. Grenadier owners who mount to factory roof rails may prefer our \u003ca href=\"https:\/\/nvmos.com\/products\/starlink-mini-roof-rail-mount-ineos-grenadier-kickstand\"\u003eStarlink Mini Roof Mount v2 – Rail \u0026amp; Kickstand\u003c\/a\u003e, and anyone wanting a removable, no-hardware option should see the \u003ca href=\"https:\/\/nvmos.com\/products\/starlink-mini-magnetic-roof-mount\"\u003eStarlink Mini Magnetic Roof Mount Platform\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDish compatibility\u003c\/td\u003e\n\u003ctd\u003eStarlink Mini only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eBlack anodized aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRack compatibility\u003c\/td\u003e\n\u003ctd\u003e20×20 T-slot, L-Track channel, small-format T-slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eClamp-on, no drilling required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-theft\u003c\/td\u003e\n\u003ctd\u003eDual security screw retention\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAngle adjustment\u003c\/td\u003e\n\u003ctd\u003eIntegrated kickstand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMount base plate (black anodized aluminum)\u003c\/li\u003e\n\u003cli\u003eKickstand assembly with anti-theft screws\u003c\/li\u003e\n\u003cli\u003eHardware sets for all three channel formats\u003c\/li\u003e\n\u003cli\u003eLong-reach screwdriver for field adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Starlink dish does this fit?\u003c\/strong\u003e\u003cbr\u003e\nThe Starlink Mini only. The cradle is sized to the Mini's dimensions and does not accommodate the standard or larger Starlink antennas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my roof rack?\u003c\/strong\u003e\u003cbr\u003e\nMost likely. The kit includes hardware for 20×20 T-slot, L-Track, and small-format T-slot channels — the three most common modular rack standards — so it clamps into the majority of aftermarket racks with no drilling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it deter theft?\u003c\/strong\u003e\u003cbr\u003e\nThe base plate and kickstand are secured with two anti-theft screws, and the included long-reach screwdriver is what you use to set and later adjust them. Casual hands can't simply lift the dish off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I run power to the Mini through this mount?\u003c\/strong\u003e\u003cbr\u003e\nThe mount doesn't include a power cable. For a clean rooftop feed, pair it with our \u003ca href=\"https:\/\/nvmos.com\/products\/starlink-mini-power-cable-dtp-ineos-grenadier\"\u003eStarlink Mini DTP Power Cable\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it hold angle at highway speed?\u003c\/strong\u003e\u003cbr\u003e\nYes. The integrated kickstand locks the dish angle and the anti-theft screws keep it from shifting under wind load and vibration.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024329355567,"sku":"I-WM-SL-U","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/starlink-mini-roof-rack-mount-v2-universal-roof-rack-fit-with-anti-theft-kickstand-4068020.jpg?v=1774973982"},{"product_id":"ineos-grenadier-dtp06-power-splitter-cable-waterproof","title":"INEOS Grenadier: DTP-06-2S to IP65 Waterproof Splitter","description":"\u003cp\u003eExpand one INEOS Grenadier rooftop DTP outlet into two sealed, weatherproof feeds. This splitter plugs a DTP-06-2S male into a single factory rooftop port and breaks it out to two IP65 waterproof connectors, letting you run a pair of exterior accessories — scene lighting plus a comms antenna, or two camp lights — without cutting factory wiring. The 16 AWG conductors and IP65 outputs are built for permanent, year-round rooftop use.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne DTP-06-2S male input; two IP65 waterproof outputs (1-in, 2-out)\u003c\/li\u003e\n\u003cli\u003eSealed IP65 output connectors resist dust and water spray when properly mated\u003c\/li\u003e\n\u003cli\u003e16 AWG conductors for reliable 12V accessory feeds\u003c\/li\u003e\n\u003cli\u003eRuns two rooftop accessories from a single DTP source — no cutting or splicing\u003c\/li\u003e\n\u003cli\u003eIdeal for combining camp\/scene lighting with communications or low-current rooftop devices\u003c\/li\u003e\n\u003cli\u003eSafe for year-round installation with proper strain relief on the roof\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned specifically for the INEOS Grenadier (2023–present) rooftop DTP power system, all trims. It is not a voltage converter and is not for high-current loads beyond the source circuit limits. Verify each accessory's current draw and confirm its connector mates to the IP65 output before ordering.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connector\u003c\/td\u003e\n\u003ctd\u003eDTP-06-2S male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connectors\u003c\/td\u003e\n\u003ctd\u003e2× IP65 waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e1-in, 2-out splitter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire gauge\u003c\/td\u003e\n\u003ctd\u003e16 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating\u003c\/td\u003e\n\u003ctd\u003e12V DC, 15A total maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (weatherproof outputs when mated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e227 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1× DTP-06-2S to dual IP65 splitter cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot included: accessory lights or devices, fuse upgrades, or switch controllers.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich splitter do I need — this IP65 version or the DTP04-2P version?\u003c\/strong\u003e\u003cbr\u003e\nChoose this one when your two accessories terminate in sealed 2-pin IP65 connectors, which is common for exterior rooftop lighting. If your accessories use DTP-04-2P male plugs instead, pick our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-dtp-06-2s-male-to-2-way-dtp04-2p-u-unbalanced-female-splitter\"\u003eDTP-06-2S to 2-way DTP04-2P splitter\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan both outputs run at full load at the same time?\u003c\/strong\u003e\u003cbr\u003e\nBoth outputs are live together, but only within the source circuit and fuse limits — the combined draw of both accessories must stay within the port's rating (15A total).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include an inline fuse?\u003c\/strong\u003e\u003cbr\u003e\nNo. There's no inline fuse; upstream protection from the vehicle's DTP circuit is required. It is also not a voltage converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it safe to leave installed year-round?\u003c\/strong\u003e\u003cbr\u003e\nYes. The IP65 outputs are weatherproof when properly mated, and the splitter is fine for permanent installation as long as you add proper strain relief so the connectors aren't stressed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I feed a longer run off one of the outputs?\u003c\/strong\u003e\u003cbr\u003e\nYes — pair an output with our \u003ca href=\"https:\/\/nvmos.com\/products\/dtp04-2p-female-to-ip65-waterproof-connector-cable-3-meters\"\u003e3-meter IP65 extension cable\u003c\/a\u003e to reach an accessory farther from the port.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024330928431,"sku":"I-PWR-2WP","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/dtp-06-2s-to-ip65-waterproof-splitter-1821283.jpg?v=1774973985"},{"product_id":"ineos-grenadier-rooftop-power-adapter-dtp06-2s-male-to-2-way-dtp04-2p-splitter","title":"INEOS Grenadier: DTP-06-2S Male to 2-Way DTP04-2P Female Splitter","description":"\u003cp\u003eThis DTP splitter lets you run two accessories from a single INEOS Grenadier rooftop outlet. One DTP06-2S male plug goes into the factory EXT port, and two DTP-04-2P female outputs come back out — so a single connection now powers a pair of devices. It is a balanced splitter, plug-and-play, with no cutting, crimping, or changes to your OEM wiring.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSplits one factory DTP outlet into two DTP-04-2P female outputs\u003c\/li\u003e\n\u003cli\u003eBalanced design shares the circuit evenly between both legs\u003c\/li\u003e\n\u003cli\u003eLocking, weatherproof DTP connectors keep the connection secure on the roof\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play — no tools, no crimping, no splicing\u003c\/li\u003e\n\u003cli\u003eLeaves factory OEM wiring completely intact and fully reversible\u003c\/li\u003e\n\u003cli\u003eFrees up a second powered connection when your EXT ports are already allocated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier across all trims, connecting to the factory DTP rooftop outlets (typically EXT2 or EXT3). The Grenadier has a fixed number of EXT outlets, so this splitter is the clean way to add a second accessory once your ports are spoken for. A common pairing is running a directional side light and a wide-beam flood from the same port.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connector\u003c\/td\u003e\n\u003ctd\u003eDTP06-2S male (vehicle side)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connectors\u003c\/td\u003e\n\u003ctd\u003e2x DTP-04-2P female (accessory side)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eBalanced splitter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating\u003c\/td\u003e\n\u003ctd\u003e12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eLocking, weatherproof DTP standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug-and-play, no tools or crimping; fully reversible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x DTP splitter cable — DTP06-2S male to 2x DTP-04-2P female\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this splitter do?\u003c\/strong\u003e\u003cbr\u003e\nIt converts a single Grenadier DTP rooftop outlet into two DTP-04-2P female connections, letting you power two accessories from one EXT port without adding wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much can I run through it?\u003c\/strong\u003e\u003cbr\u003e\nThe combined wattage of both connected accessories must stay within the EXT port's rated output. As a rule of thumb, two lights drawing around 30W each (about 60W total) is a typical safe load; check your port rating for higher-draw gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need any wiring or crimping?\u003c\/strong\u003e\u003cbr\u003e\nNo. It plugs directly into the factory DTP outlet and your accessories plug into it — no cutting, splicing, or crimping, and nothing about the OEM harness is modified.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between this and the unbalanced version?\u003c\/strong\u003e\u003cbr\u003e\nThis is the balanced splitter, which shares the circuit evenly between both legs. If you need fixed-length legs for a specific routing, see our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-dtp-06-2s-male-to-2-way-dtp04-2p-u-unbalanced-female-splitter\"\u003eDTP-06-2S to 2-Way DTP04-2P-U unbalanced splitter\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a typical use case?\u003c\/strong\u003e\u003cbr\u003e\nRunning a \u003ca href=\"https:\/\/nvmos.com\/products\/led-side-light-for-ineos-grenadier-roof-bar-mount-dtp-plug-in\"\u003eLED Side Light\u003c\/a\u003e and an \u003ca href=\"https:\/\/nvmos.com\/products\/led-side-flood-light-ineos-grenadier-roof-bar-dtp-plug-in\"\u003eLED Side Flood Light\u003c\/a\u003e from the same EXT outlet — directional trail lighting and wide-area flood from one connection.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024332206383,"sku":"I-PWR-2WS","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/dtp-06-2s-male-to-2-way-dtp04-2p-female-splitter-1159247.jpg?v=1774973988"},{"product_id":"starlink-mini-roof-rail-mount-ineos-grenadier-kickstand","title":"INEOS Grenadier: Starlink Mini Roof Mount v2 – Rail \u0026 Kickstand","description":"\u003cp\u003eKeep Starlink connectivity running off-grid with a mount engineered to clamp onto the INEOS Grenadier's factory roof rails and hold the Starlink Mini secure at speed. This Gen 2 version ditches the flimsy plastic stand that ships with the Mini and replaces it with an integrated anti-theft kickstand that locks in at your chosen angle. Setup is tool-free, the geometry is adjustable for a clean line of sight, and the aircraft-grade aluminum shrugs off high-altitude cold, dust, and heavy rain.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClamps to the Grenadier's factory roof rails for a rock-solid, rattle-free hold\u003c\/li\u003e\n\u003cli\u003eIntegrated anti-theft kickstand replaces the Mini's flimsy plastic stand and locks in position\u003c\/li\u003e\n\u003cli\u003eTool-free field setup with a secure clamping mechanism — no drilling, no adhesive\u003c\/li\u003e\n\u003cli\u003eAdjustable mounting geometry for optimal satellite line-of-sight, parked or moving\u003c\/li\u003e\n\u003cli\u003eAircraft-grade black anodized aluminum resists corrosion, abrasion, and extreme weather\u003c\/li\u003e\n\u003cli\u003eLow-drag, streamlined profile keeps the dish tight to the roofline\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned for the INEOS Grenadier (2022–present, all trims) with factory roof rails, and compatible with aftermarket rails as well. It holds the Starlink Mini with or without its original plastic stand. This is the rail-clamp version; if your build uses a modular rack with T-slot or L-Track channels, choose our \u003ca href=\"https:\/\/nvmos.com\/products\/starlink-mini-roof-mount-v2-ineos-grenadier-kickstand\"\u003eStarlink Mini Roof Rack Mount v2 – Universal Roof Rack Fit\u003c\/a\u003e, and for a quick removable option on any steel roof see the \u003ca href=\"https:\/\/nvmos.com\/products\/starlink-mini-magnetic-roof-mount\"\u003eStarlink Mini Magnetic Roof Mount Platform\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDish compatibility\u003c\/td\u003e\n\u003ctd\u003eStarlink Mini (with or without plastic stand)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003eINEOS Grenadier (2022–present), factory or aftermarket roof rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAircraft-grade black anodized aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFactory roof rail clamp, tool-free, no drilling or adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKickstand\u003c\/td\u003e\n\u003ctd\u003eIntegrated anti-theft kickstand, locking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeatherproofing\u003c\/td\u003e\n\u003ctd\u003eHigh-altitude, heavy rain, dust, and extreme temperatures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCustom roof rail mount for Starlink Mini (Gen 2)\u003c\/li\u003e\n\u003cli\u003eIntegrated anti-theft kickstand\u003c\/li\u003e\n\u003cli\u003eFull mounting hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit my Grenadier's roof rails?\u003c\/strong\u003e\u003cbr\u003e\nYes. It's purpose-designed for the INEOS Grenadier factory roof rails (2022+, all trims) and clamps on tool-free. It also works with compatible aftermarket rails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's different about the Gen 2 version?\u003c\/strong\u003e\u003cbr\u003e\nGen 2 replaces the weak plastic kickstand supplied with the Starlink Mini with an integrated, locking anti-theft kickstand that holds your chosen angle and deters casual theft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need tools to install or remove it?\u003c\/strong\u003e\u003cbr\u003e\nNo. The clamping mechanism is tool-free for rapid field deployment and removal, with no drilling or adhesive required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a power cable included?\u003c\/strong\u003e\u003cbr\u003e\nNo. The DTP-to-DC power cable is sold separately — pair this mount with our \u003ca href=\"https:\/\/nvmos.com\/products\/starlink-mini-power-cable-dtp-ineos-grenadier\"\u003eStarlink Mini DTP Power Cable\u003c\/a\u003e for a factory-clean rooftop feed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it survive serious weather?\u003c\/strong\u003e\u003cbr\u003e\nIt's built from aircraft-grade anodized aluminum and engineered for high-altitude exposure, heavy rain, dust, and temperature extremes.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024333943087,"sku":"I-WM-SL2","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-starlink-mini-roof-mount-v2-rail-kickstand-5972113.jpg?v=1774973990"},{"product_id":"hi-lift-jack-mount-ineos-grenadier-rear-ladder","title":"INEOS Grenadier: Ladder-Mounted Hi‑Lift Jack Carrier","description":"\u003cp\u003eCarry your Hi-Lift on the outside of the INEOS Grenadier without giving up the tailgate or the ladder. This carrier clamps a 48-inch Hi-Lift jack to the factory rear ladder using rubber-lined cradles that keep the jack silent on the trail, positioned so the rear door still opens fully and the ladder stays climbable.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePowder-coated steel construction sized specifically for the Grenadier's rear ladder\u003c\/li\u003e\n\u003cli\u003eRubber-lined cradles dampen vibration and protect the jack's finish\u003c\/li\u003e\n\u003cli\u003eCarries a standard 48-inch Hi-Lift jack\u003c\/li\u003e\n\u003cli\u003eFull rear door clearance, so the tailgate opens without interference\u003c\/li\u003e\n\u003cli\u003eLadder remains fully usable with the jack mounted\u003c\/li\u003e\n\u003cli\u003eThree 3-inch clamps and three M8 knobs for quick, tool-light removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits INEOS Grenadier (2023-present) models equipped with the factory rear ladder. It bolts to the ladder tubes with the supplied clamps, so no drilling is needed. The mount pairs naturally with our \u003ca href=\"https:\/\/nvmos.com\/products\/rear-ladder-mounted-accessory-carrier-for-ineos-grenadier-gen2\"\u003eLadder-Mounted Accessory Carrier\u003c\/a\u003e for a fully loaded rear-ladder setup.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePowder-coated steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCradles\u003c\/td\u003e\n\u003ctd\u003eRubber-lined, vibration-damping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJack compatibility\u003c\/td\u003e\n\u003ctd\u003e48-inch Hi-Lift jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting hardware\u003c\/td\u003e\n\u003ctd\u003e3x 3-inch clamps, 3x M8 knobs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount location\u003c\/td\u003e\n\u003ctd\u003eFactory rear ladder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClearance\u003c\/td\u003e\n\u003ctd\u003eFull rear door opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-on, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHi-Lift jack carrier\u003c\/li\u003e\n\u003cli\u003e3x 3-inch versatile mounting clamps\u003c\/li\u003e\n\u003cli\u003e3x M8 knobs\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003cli\u003eNote: Hi-Lift jack sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Hi-Lift jack included?\u003c\/strong\u003e\u003cbr\u003e\nNo. The carrier holds a standard 48-inch Hi-Lift jack, which you purchase separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I still open the rear door?\u003c\/strong\u003e\u003cbr\u003e\nYes. The jack sits clear of the door swing, so the tailgate opens fully without interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I still use the ladder?\u003c\/strong\u003e\u003cbr\u003e\nYes. The ladder stays fully functional with the jack mounted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it attached to the vehicle?\u003c\/strong\u003e\u003cbr\u003e\nThree 3-inch clamps and M8 knobs secure it to the factory rear ladder tubes. It is a bolt-on install with no drilling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it quiet on rough roads?\u003c\/strong\u003e\u003cbr\u003e\nRubber-lined cradles dampen vibration and stop the jack from rattling against the mount over washboard and trail.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024335483183,"sku":"I-HL-3","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-ladder-mounted-hilift-jack-carrier-1168770.jpg?v=1774973993"},{"product_id":"ineos-grenadier-dtp-to-ip65-power-cable-awg16","title":"INEOS Grenadier: DTP-06-2S to IP65 Waterproof Connector Cable","description":"\u003cp\u003eThis adapter cable bridges the INEOS Grenadier's factory DTP rooftop outlet to a weatherproof IP65 connector, so you can power light bars, work lights, antennas, and other rooftop gear without custom crimping. One end is a rugged DTP-06-2S plug for the vehicle; the other is an IP65-rated connector that accepts accessory pigtails from AWG16 all the way down to fragile AWG24 wiring. Built on AWG16 cable, it delivers a robust, plug-and-play power path where hand-crimping a DTP plug onto thin wire would be unreliable.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDTP-06-2S connector plugs straight into the Grenadier's factory rooftop outlet\u003c\/li\u003e\n\u003cli\u003eWeatherproof IP65-rated connector on the accessory end\u003c\/li\u003e\n\u003cli\u003eAWG16 cable rated for 12V DC at 15A\u003c\/li\u003e\n\u003cli\u003eAccepts accessory wire pigtails from AWG16 down to AWG24 — no more crimping thin, fragile wires directly to a DTP plug\u003c\/li\u003e\n\u003cli\u003eClean, reliable connection for light bars, work lights, antennas, and rooftop accessories\u003c\/li\u003e\n\u003cli\u003eNo splicing or custom terminals required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier with factory DTP rooftop power outlets across all trims. The DTP-06-2S end connects to an EXT outlet; the IP65 end mates with any accessory carrying a compatible IP65 pigtail or thin-gauge lead. Ideal for outfitting off-road rigs and work vehicles that use accessories with delicate wiring not suited to direct DTP termination.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connector\u003c\/td\u003e\n\u003ctd\u003eDTP-06-2S (Grenadier rooftop port)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connector\u003c\/td\u003e\n\u003ctd\u003eIP65 weatherproof connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable gauge\u003c\/td\u003e\n\u003ctd\u003eAWG16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating\u003c\/td\u003e\n\u003ctd\u003e12V DC, 15A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeather rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible accessory wire\u003c\/td\u003e\n\u003ctd\u003eAWG16 to AWG24 pigtails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x DTP-06-2S to IP65 waterproof connector cable (AWG16)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhy not just crimp a DTP plug onto my accessory?\u003c\/strong\u003e\u003cbr\u003e\nCrimping fragile AWG24 wire directly to a DTP connector is difficult and unreliable. This cable gives you a robust IP65 junction on AWG16 cable, so you get a dependable, plug-and-play connection instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the current rating?\u003c\/strong\u003e\u003cbr\u003e\nThe cable is rated for 12V DC at 15A, built on AWG16 conductors for low voltage drop on rooftop runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat accessories does it work with?\u003c\/strong\u003e\u003cbr\u003e\nAnything with a compatible IP65 pigtail or a thin lead in the AWG16 to AWG24 range — light bars, work lights, antennas, and similar rooftop gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it weatherproof?\u003c\/strong\u003e\u003cbr\u003e\nYes. The accessory-side connector is IP65-rated, and the DTP end uses the Grenadier's sealed rooftop standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I feed two accessories through it?\u003c\/strong\u003e\u003cbr\u003e\nThis is a single-run adapter. To power two accessories from one outlet, add our \u003ca href=\"https:\/\/nvmos.com\/products\/ineos-grenadier-dtp06-power-splitter-cable-waterproof\"\u003eDTP-06-2S to IP65 Waterproof Splitter\u003c\/a\u003e upstream.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024336597295,"sku":"I-PWR-DC","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/dtp-06-2s-to-ip65-waterproof-connector-awg16-7759325.jpg?v=1774973996"},{"product_id":"4-pack-m8-x-20mm-l-track-bolt","title":"L-Track Bolt, M8, 4-Pack","description":"\u003cp\u003eThese M8 L-Track bolts turn any standard L-Track slot into a clean threaded mounting point for brackets, feet, and hardware. Each Series L double-stud fitting locks into the rail and presents an M8 threaded post rated to a 1500 kg minimum breaking strength. Choose your length by mounting-surface thickness: 20 mm for thin panels, 40 mm for mid-depth work, and 60 mm for thicker stack-ups.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSeries L double-stud fitting seats securely in standard L-Track\u003c\/li\u003e\n\u003cli\u003eM8 threaded stud accepts standard metric hardware and accessories\u003c\/li\u003e\n\u003cli\u003e1500 kg minimum breaking strength across all length options\u003c\/li\u003e\n\u003cli\u003eGalvanized steel with a corrosion-resistant silver finish\u003c\/li\u003e\n\u003cli\u003eThree lengths available: 20 mm, 40 mm, and 60 mm, all M8 thread with the same load rating\u003c\/li\u003e\n\u003cli\u003eFour bolts per pack; no special tools required to seat in the rail\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eUniversal fit for standard L-Track (airline-track) systems on trailers, trucks, vans, and vehicle storage builds, including our DualTrack and LoadSpan L-Track channels. Select bolt length based on the thickness of the accessory or surface being clamped down.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting type\u003c\/td\u003e\n\u003ctd\u003eSeries L double-stud fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread size\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength options\u003c\/td\u003e\n\u003ctd\u003e20 mm, 40 mm, 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum breaking strength\u003c\/td\u003e\n\u003ctd\u003e1500 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eGalvanized steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e4 bolts per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLT-4-20 \/ LT-4-40 \/ LT-4-60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e4 x M8 L-Track bolts in the length you select\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich length should I choose?\u003c\/strong\u003e\u003cbr\u003e\nMatch the length to the thickness of what you are mounting. 20 mm suits thin brackets and panels, 40 mm handles mid-depth stack-ups, and 60 mm reaches through thicker feet or spacers. All three share the same M8 thread and 1500 kg breaking strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the different lengths have different load ratings?\u003c\/strong\u003e\u003cbr\u003e\nNo. All lengths use the same M8 thread and carry the same 1500 kg minimum breaking strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my L-Track?\u003c\/strong\u003e\u003cbr\u003e\nYes, for standard L-Track (airline-track) rail. They are not designed for E-Track or proprietary non-L-Track channels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do these compare to the 3\/8\" threaded lugs?\u003c\/strong\u003e\u003cbr\u003e\nThese are metric M8 bolts rated to 1500 kg in three lengths. For heavier anchoring, our \u003ca href=\"https:\/\/nvmos.com\/products\/l-track-heavy-duty-threaded-lug-8-pack\"\u003e3\/8\" heavy-duty threaded lugs\u003c\/a\u003e use 3\/8\"-16 thread with a 3000 lb breaking strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat accessories pair with these bolts?\u003c\/strong\u003e\u003cbr\u003e\nThey work well for bolting down L-Track sliders, brackets, and accessory feet. See our \u003ca href=\"https:\/\/nvmos.com\/products\/l-track-slider-for-dualtrack-roof-rails-ineos-grenadier-utility-belt\"\u003eL-Track sliders\u003c\/a\u003e for adjustable mounting platforms.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"20mm","offer_id":56024338333999,"sku":"LT-4-20","price":17.0,"currency_code":"USD","in_stock":true},{"title":"40mm","offer_id":56024338366767,"sku":"LT-4-40","price":17.0,"currency_code":"USD","in_stock":true},{"title":"60mm","offer_id":56024338399535,"sku":"LT-4-60","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/l-track-bolt-m8-4-pack-9622713.jpg?v=1774973998"},{"product_id":"single-stud-fitting-with-w-base-and-stainless-steel-o-ring-for-ineos-grenadier","title":"L-Track Tie Down O-Ring Fitting, Orange, 4-Pack","description":"\u003cp\u003eThese orange O-ring fittings add rated, high-visibility tie-down points to any standard L-Track rail. Each uses a 5mm stainless steel ring on a high-strength plastic W-base with a spring-loaded stud, carrying a 1500 kg breaking strength for confident cargo control. The stainless ring resists corrosion and the bright orange base makes anchor points easy to spot in a loaded cargo bay. Built for tie-down straps, bungees, and recovery gear in enclosed applications.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e5mm stainless steel O-ring for strength and corrosion resistance\u003c\/li\u003e\n\u003cli\u003e1500 kg breaking strength for demanding tie-down applications\u003c\/li\u003e\n\u003cli\u003eHigh-strength plastic W-base with spring-loaded stud that locks positively into the rail\u003c\/li\u003e\n\u003cli\u003eStainless steel spring protected by a rubber cover to resist grit and wear\u003c\/li\u003e\n\u003cli\u003eBright orange finish keeps anchor points visible in a packed cargo area\u003c\/li\u003e\n\u003cli\u003eTool-free install and removal; four fittings per pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eUniversal fit for standard L-Track (airline-track) rail, including INEOS Grenadier L-Track systems, our DualTrack roof rails, and LoadSpan Sprinter rail L-Track channels. Designed for enclosed tie-down applications. Not compatible with E-Track or non-standard rail profiles.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting type\u003c\/td\u003e\n\u003ctd\u003eSingle-stud O-ring fitting with W-base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRing\u003c\/td\u003e\n\u003ctd\u003e5mm stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eHigh-strength plastic W-base with spring-loaded stud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring\u003c\/td\u003e\n\u003ctd\u003eStainless steel with rubber protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreaking strength\u003c\/td\u003e\n\u003ctd\u003e1500 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eOrange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e4 fittings per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLT-4-OR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e4 x orange O-ring stud fittings with 5mm stainless ring and plastic W-base\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow strong are these fittings?\u003c\/strong\u003e\u003cbr\u003e\nEach carries a 1500 kg breaking strength through its 5mm stainless steel ring. Actual working load also depends on your rail, mounting, and strap, so rate the system to its weakest component.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do they lock into the rail?\u003c\/strong\u003e\u003cbr\u003e\nInsert the bottom disc into a round opening in the L-Track, then slide the fitting until the spring-loaded stud locks between the track openings. No tools are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do these compare to the silver O-ring fittings?\u003c\/strong\u003e\u003cbr\u003e\nThe orange fitting uses a 5mm stainless steel ring on a high-strength plastic W-base with a published 1500 kg breaking strength. Our \u003ca href=\"https:\/\/nvmos.com\/products\/4-pack-l-track-o-ring-stud-fitting-silver\"\u003esilver O-ring fittings\u003c\/a\u003e are a zinc-alloy, chrome-finished single stud for general tie-down use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they fit my INEOS Grenadier L-Track?\u003c\/strong\u003e\u003cbr\u003e\nYes. They are compatible with the Grenadier's L-Track systems and standard airline-track rail, and drop into our DualTrack roof rails. They are not for E-Track or non-standard profiles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre straps included?\u003c\/strong\u003e\u003cbr\u003e\nNo. This listing is for the four O-ring fittings only. Add your own straps, bungees, or shackles.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":56024339579183,"sku":"LT-4-OR","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/l-track-tie-down-o-ring-fitting-orange-4-pack-9134913.jpg?v=1774974000"},{"product_id":"versatile-mounting-clamp-2-pack-ineos-grenadier","title":"INEOS Grenadier: Versatile Mounting Clamps – 2‑Pack (2\" or 3\" Versions Available)","description":"\u003cp\u003eThese Versatile Mounting Clamps give the INEOS Grenadier a fast, secure way to attach gear to its body gutters and rear ladder without permanent modification. Sold as a two-pack in a 2-inch or 3-inch depth, each version is sized for a specific job: the 2-inch clamp aligns with the side gutter and the horizontal rungs of the rear ladder, while the 3-inch clamp clears the top of the roof and grabs the ladder's vertical rails. Both share a 1.5-inch mounting face with M8 holes spaced 1 inch apart, so accessories interchange between them.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-pack of clamps purpose-shaped for the Grenadier's gutters and rear ladder\u003c\/li\u003e\n\u003cli\u003e2-inch version: aligns with the side gutter and the horizontal rails of the rear ladder — ideal for side-mounted gear\u003c\/li\u003e\n\u003cli\u003e3-inch version: sized to clear the top of the roof and grip the vertical rails of the rear ladder\u003c\/li\u003e\n\u003cli\u003eCommon 1.5-inch mounting face with two M8 holes spaced 1 inch apart on every version, so brackets and accessories are interchangeable\u003c\/li\u003e\n\u003cli\u003eClamp-on installation — no drilling into the body or ladder\u003c\/li\u003e\n\u003cli\u003eMount jerry cans, MOLLE panels, recovery tools, and similar gear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier (2023–present), all trims. The clamps are contoured to the vehicle's gutters and ladder tubing. Choose the 2-inch for side-gutter and horizontal-ladder mounting or the 3-inch for roof-clearing and vertical-ladder mounting. The shared M8 hole pattern lets you bolt on jerry can carriers, MOLLE panels, and recovery gear; pair them with our body-mounted \u003ca href=\"https:\/\/nvmos.com\/products\/exterior-utility-belt-full-set-for-ineos-grenadier\"\u003eExterior Utility Belt\u003c\/a\u003e to expand mounting real estate.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack quantity\u003c\/td\u003e\n\u003ctd\u003e2 clamps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003e2-inch or 3-inch (choose one)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2-inch use\u003c\/td\u003e\n\u003ctd\u003eSide gutter; horizontal ladder rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3-inch use\u003c\/td\u003e\n\u003ctd\u003eRoof clearance; vertical ladder rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting face width\u003c\/td\u003e\n\u003ctd\u003e1.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastener pattern\u003c\/td\u003e\n\u003ctd\u003eM8 holes spaced 1 inch apart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eClamp-on, no drilling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 versatile mounting clamps in the selected size (2-inch or 3-inch)\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 2-inch or 3-inch version?\u003c\/strong\u003e\u003cbr\u003e\nPick the 2-inch to mount along the side gutter or the horizontal rails of the rear ladder. Pick the 3-inch when you need to clear the top of the roof or clamp to the ladder's vertical rails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the two sizes interchangeable for accessories?\u003c\/strong\u003e\u003cbr\u003e\nYes. Both share the same 1.5-inch mounting face and M8 holes spaced 1 inch apart, so any bracket that fits one fits the other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can I mount with them?\u003c\/strong\u003e\u003cbr\u003e\nJerry cans, MOLLE panels, recovery tools, and similar overland gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to drill?\u003c\/strong\u003e\u003cbr\u003e\nNo. They clamp to the gutter or ladder tubing with no drilling required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the M8 screws come included?\u003c\/strong\u003e\u003cbr\u003e\nThe clamps ship with mounting hardware, but check the accessory you are attaching for its own fasteners.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"2 inch (side and ladder horizontal)","offer_id":56024341119279,"sku":"I-FB2-2","price":59.0,"currency_code":"USD","in_stock":true},{"title":"3 inch (roof and ladder vertical)","offer_id":56024341152047,"sku":"I-FB2-3","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/ineos-grenadier-versatile-mounting-clamps-2pack-2-or-3-versions-available-9061720.jpg?v=1774974003"},{"product_id":"starlink-mini-power-cable-dtp-ineos-grenadier","title":"INEOS Grenadier: Starlink Mini DTP Power Cable (1m \/ 2m \/ 3m)","description":"\u003cp\u003ePower your Starlink Mini straight from the INEOS Grenadier's factory DTP outlet with no bulky adapters or spliced wiring. This purpose-made cable plugs into a rooftop EXT port at one end and terminates in the 2.1mm x 5.5mm DC barrel that the Starlink Mini uses at the other, so you stay connected off-grid using the truck's native 12V power. Choose the length that matches your run: 1m, 2m, or 3m.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect DTP-to-Starlink connection — no adapters, no splicing, no field wiring\u003c\/li\u003e\n\u003cli\u003eDTP-2 male plug on the vehicle side, 2.1mm x 5.5mm DC connector on the Starlink Mini side\u003c\/li\u003e\n\u003cli\u003e16 AWG conductors for efficient power transmission and minimal voltage drop\u003c\/li\u003e\n\u003cli\u003eThree length options (1m \/ 2m \/ 3m) to suit roof-mount or interior routing\u003c\/li\u003e\n\u003cli\u003eIP65-rated connectors stand up to weather on the roofline\u003c\/li\u003e\n\u003cli\u003eClean, factory-style install using the Grenadier's existing power outlets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eMade for the INEOS Grenadier with factory DTP power outlets. The DTP-2 male end plugs into any available EXT rooftop port (EXT1, EXT2, EXT3, or EXT5), and the DC end connects directly to a Starlink Mini dish. Pick the length to match your mount: 1m for a nearby port, 2m as the balanced choice for most installs, and 3m for longer runs or interior routing.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable lengths\u003c\/td\u003e\n\u003ctd\u003e1 Meter \/ 2 Meters \/ 3 Meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle-side connector\u003c\/td\u003e\n\u003ctd\u003eDTP-2 male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice-side connector\u003c\/td\u003e\n\u003ctd\u003e2.1mm x 5.5mm DC (Starlink Mini)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire gauge\u003c\/td\u003e\n\u003ctd\u003e16 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Starlink Mini DTP power cable in your selected length (1m, 2m, or 3m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich length should I choose?\u003c\/strong\u003e\u003cbr\u003e\nPick 1m if your Starlink Mini sits close to the DTP port, 2m for most roof-mount installs (the balanced, all-purpose choice), and 3m when you need a longer run or want to route the cable inside.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need an adapter or inverter?\u003c\/strong\u003e\u003cbr\u003e\nNo. The cable connects the Grenadier's 12V DTP outlet directly to the Starlink Mini's DC input, so there are no adapters, inverters, or splicing involved.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich DTP ports does it work with?\u003c\/strong\u003e\u003cbr\u003e\nIt plugs into any available factory DTP rooftop outlet — EXT1, EXT2, EXT3, or EXT5.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill voltage drop be an issue on the longer version?\u003c\/strong\u003e\u003cbr\u003e\nThe cable uses 16 AWG conductors specifically to keep voltage drop low and power delivery reliable, even on the 3m run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it weatherproof for roof mounting?\u003c\/strong\u003e\u003cbr\u003e\nYes. The connectors are IP65-rated for exposure on the roofline. It pairs well with our \u003ca href=\"https:\/\/nvmos.com\/products\/starlink-mini-roof-rail-mount-ineos-grenadier-kickstand\"\u003eStarlink Mini Roof Mount v2\u003c\/a\u003e.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"1 Meter","offer_id":56024343052591,"sku":"i-PWR-SLM1","price":39.0,"currency_code":"USD","in_stock":true},{"title":"2 Meters","offer_id":56024343085359,"sku":"i-PWR-SLM2","price":49.0,"currency_code":"USD","in_stock":true},{"title":"3 Meters","offer_id":56024343118127,"sku":"i-PWR-SLM3","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/dva-starlink-mini-dtp-power-cable-1m-2m-3m-for-ineos-grenadier-9330267.jpg?v=1774974006"},{"product_id":"ineos-grenadier-electric-power-side-steps-with-led","title":"INEOS Grenadier: Electric Power Side Steps with LED","description":"\u003cp\u003eStep up to your INEOS Grenadier the easy way with power running boards that deploy the moment you open a door and tuck back under the rocker when you close it. Heavy-duty metal boards ride on electric motors triggered by the vehicle's door signals, and integrated LED strips light the stepping surface so you never miss your footing at night. When retracted, they sit flush against the rocker panel for a clean, OEM-style profile.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic electric deployment and retraction driven off the vehicle's door signals\u003c\/li\u003e\n\u003cli\u003eIntegrated LED light strips illuminate the step surface for safer entry and exit in low light\u003c\/li\u003e\n\u003cli\u003eHeavy-duty metal running boards with a corrosion-resistant finish and a wide, stable platform\u003c\/li\u003e\n\u003cli\u003eRetracts tightly beneath the rocker panel for a factory-clean, low-profile look\u003c\/li\u003e\n\u003cli\u003eIncludes a control module that integrates with the vehicle's electronics\u003c\/li\u003e\n\u003cli\u003eBolt-on mounting with no drilling; professional installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eFits the INEOS Grenadier Station Wagon (2023-present). Because the system ties into the vehicle's electrical system through a control module, installation difficulty is high and professional installation is recommended. If you'd rather have a simpler, non-powered option, take a look at our fold-away \u003ca href=\"https:\/\/nvmos.com\/products\/side-step-for-ineos-grenadier\"\u003eGrenadier side steps (set of 2)\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard material\u003c\/td\u003e\n\u003ctd\u003eHeavy-duty metal, corrosion-resistant finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperation\u003c\/td\u003e\n\u003ctd\u003eElectric auto deploy\/retract on door signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting\u003c\/td\u003e\n\u003ctd\u003eIntegrated LED light strips on step surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eIncluded control module, integrates with vehicle electronics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-on, no drilling; professional install recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eGrenadier Station Wagon (2023-present)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLeft and right electric side steps\u003c\/li\u003e\n\u003cli\u003eVehicle-specific mounting brackets\u003c\/li\u003e\n\u003cli\u003eElectric drive motors\u003c\/li\u003e\n\u003cli\u003eControl module\u003c\/li\u003e\n\u003cli\u003eIntegrated LED lighting\u003c\/li\u003e\n\u003cli\u003eComplete mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow do the steps know when to extend?\u003c\/strong\u003e\u003cbr\u003e\nThe system reads the vehicle's door signals through its control module: the boards extend automatically when a door opens and retract when the doors close.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they have lights?\u003c\/strong\u003e\u003cbr\u003e\nYes. Integrated LED light strips illuminate the stepping surface for safer entry and exit in low-light conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I install these myself?\u003c\/strong\u003e\u003cbr\u003e\nThe steps bolt on without drilling, but they integrate with the vehicle's electronics through a control module, so installation is rated very high in difficulty and professional installation is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they stick out and hurt my clearance off-road?\u003c\/strong\u003e\u003cbr\u003e\nNo. When not in use the boards retract tightly beneath the rocker panel for a clean OEM-style look and profile.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat vehicle do they fit?\u003c\/strong\u003e\u003cbr\u003e\nThey're built for the INEOS Grenadier Station Wagon (2023-present).\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":58158025179439,"sku":null,"price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/Grenadier_ElectricPowerSideStep-0004_73aa3657-9b00-4fbc-8352-7798a0a205a6.jpg?v=1783731398"},{"product_id":"deckspan-universal-roof-panel","title":"DeckSpan™ Universal Roof Panel — 5mm Aluminum - Set of 2","description":"\u003cp\u003eDeckSpan is a flat, structural roof deck panel that turns any crossbar rack into a walkable, gear-ready platform. Each panel is formed from 5mm aluminum and sized at 34 x 19.5 in so it can be mounted, stood on, and tied down without flexing or complaint. It's a universal panel built to standard crossbar and roof-rack patterns, and it's optimized for our DualTrack-T system, so it drops onto a Mercedes-Benz Sprinter, Ford Transit, or Ram Promaster build alike. Sold as a set of two so you can build exactly the deck you need.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e5mm formed aluminum: a step up from the common 3\/16 in (4.76 mm) decking, with forming that adds rigidity so panels hold flat and resist bow underfoot\u003c\/li\u003e\n\u003cli\u003eBuilt to be stood on for confident footing when accessing rooftop gear\u003c\/li\u003e\n\u003cli\u003eIntegrated slots and L-Track cut-outs run through the panel for tie-down and accessory anchor points across the whole deck\u003c\/li\u003e\n\u003cli\u003eTruly universal mounting to 80\/20-style extrusions and standard crossbars\u003c\/li\u003e\n\u003cli\u003eAt 19.5 in wide, three panels lay edge-to-edge to span the full 58.5 in width of a Sprinter rack\u003c\/li\u003e\n\u003cli\u003eSold two per set so you can build the deck length and layout you want\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cp\u003eUniversal fit. DeckSpan mounts to effectively any crossbar rail or roof rack, including 80\/20-style extrusions and standard crossbars, which makes it at home on Mercedes-Benz Sprinter, Ford Transit, and Ram Promaster builds as well as most aftermarket racks. It is optimized for our \u003ca href=\"https:\/\/nvmos.com\/products\/dualtrack-t-cross-bar-kit-mercedes-sprinter\"\u003eDualTrack-T Cross Bar Kit\u003c\/a\u003e, whose channels are engineered to receive the panels and lock them down from the same system. It also works on our \u003ca href=\"https:\/\/nvmos.com\/products\/dualtrack-roof-rail-ineos-grenadier\"\u003eGrenadier DualTrack crossbars\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e5mm formed aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel size\u003c\/td\u003e\n\u003ctd\u003e34 x 19.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSprinter coverage\u003c\/td\u003e\n\u003ctd\u003e3 panels span full rack width (58.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eUniversal: 80\/20-style crossbars and standard roof racks; optimized for DualTrack-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTie-downs\u003c\/td\u003e\n\u003ctd\u003eIntegrated slots and L-Track cut-outs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eSprinter, Transit, Promaster, and most aftermarket racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold\u003c\/td\u003e\n\u003ctd\u003e2 panels per set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 x DeckSpan 5mm aluminum roof deck panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow many panels do I need?\u003c\/strong\u003e\u003cbr\u003e\nMeasure the rack area you want to deck and divide by the 19.5 in panel width. For a full-width Sprinter deck, plan on three panels per row and add rows front-to-back to reach your length. Each set includes two panels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs 5mm aluminum strong enough to stand on?\u003c\/strong\u003e\u003cbr\u003e\nYes. At 5mm the panel is thicker than the common 3\/16 in (4.76 mm) decking on the market, and the forming adds rigidity so it holds flat and resists bow and bend when you step on it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat racks does it fit?\u003c\/strong\u003e\u003cbr\u003e\nIt's universal. DeckSpan mounts to 80\/20-style extrusions and standard crossbars, fitting Sprinter, Transit, Promaster, and most aftermarket racks. It's optimized for the DualTrack-T system for a clean, repeatable mounting interface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I tie gear down to it?\u003c\/strong\u003e\u003cbr\u003e\nSlots and L-Track cut-outs run through each panel, giving you ready anchor points for straps, gear, and accessories across the entire deck with no separate hardware to design around.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I space the panels around roof equipment?\u003c\/strong\u003e\u003cbr\u003e\nYes. Run them edge-to-edge for a continuous walkway, or space them to clear A\/C units, fans, solar, and vents while keeping solid footing where you need it.\u003c\/p\u003e","brand":"DVA Mechanics","offers":[{"title":"Default Title","offer_id":58158025212207,"sku":null,"price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/5113\/5535\/files\/Roof_Plate_17180037_0503_DLarge_428f1ed6-0f16-48f3-92e2-625c4971bb88.jpg?v=1783731401"}],"url":"https:\/\/nvmos.com\/collections\/dva-mechanics.oembed?page=3","provider":"NVMOS","version":"1.0","type":"link"}